Bridge ports and Nat Rules:
[admin@ValleyView] > interface bridge port print
Flags: X - disabled, I - inactive, D - dynamic
# INTERFACE BRIDGE PRIORITY
PATH-COST HORIZON
0 I ether2 Wlan-lan 0x80
10 none
1 I wlan Wlan-lan 0x80
10 none
2 I Wan Info-EdVV-Wan 0x80
10 none
3 I Info-EdVV Info-EdVV-Wan 0x80
10 none
[admin@ValleyView] /ip firewall> nat print
Flags: X - disabled, I - invalid, D - dynamic
0 chain=srcnat action=masquerade out-interface=Wan
I will try your suggestions tomorrow. Thanks Butch.
Scottie Arnett
President
Info-Ed, Inc.
Electronics and More
931-243-2101
[email protected]
----- Original Message -----
From: "Butch Evans" <[email protected]>
To: <[email protected]>
Sent: Monday, October 15, 2012 11:20 PM
Subject: Re: [Mikrotik] Virtual Wireless AP and Regular AP on one interface.
On Mon, 2012-10-15 at 18:06 -0500, Scottie Arnett wrote:
I am trying to setup a Routerboard with a Virtual Wireless
AP and a Regular AP on one wireless interface. I have both
AP's working and can connect to them. The Regular AP has a
one public IP on the Wan side and DHCP on it's interface with
NAT and is working. I need the Virtual AP to be bridged so that
the connecting radios use a public IP.
You should be able to do something like this:
physical wireless = private IP with NAT and NOT bridged
Virtual AP + WAN in a bridge.
The IP addresses that are currently assigned to the WAN interface needs
to be moved to the new bridge. Also, IF you are specifying
out-interface on your NAT rules, the NEW out-interface would be this new
bridge. You should add the MAC address of the current WAN port as an
administrative mac address on the bridge, so that it doesn't change when
people connect/disconnect to the virtual AP.
My problem is that when I enable the the Virtual AP, the regular AP
stops passing traffic to the internet. What have I missed? Or can
this be done this way?
Not sure why this is happening, but you didn't post your bridge ports or
the firewall nat rules. Perhaps there is a mistake there.
--
********************************************************************
* Butch Evans * Professional Network Consultation *
* http://www.butchevans.com/ * Network Engineering *
* http://store.wispgear.net/ * Wired or Wireless Networks *
* http://blog.butchevans.com/ * ImageStream, Mikrotik and MORE! *
* NOTE THE NEW PHONE NUMBER: 702-537-0979 *
********************************************************************
_______________________________________________
Mikrotik mailing list
[email protected]
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik
RouterOS
_______________________________________________
Mikrotik mailing list
[email protected]
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
