OK, I believe I have an accurate file and commands in the proper order but when I load based on the command steps listed below, the Neighborviewer only shows a 0.0.0.0 IP address. There are no log files on the 750. If I paste the file Line by line, It configures correctly but I have to paste it after I have rest it back to "default" config just to get into it (192.168.88.0/24). So I do have commands in the file that remove the default config setting (dhcp-client, IP on lan 192.168.88.1/24, FW rules)
Can someone look at my file to see what is set incorrectly? I run it this way /system reset-configuration no-defaults=yes /import file=fullconfig.rsc and I run it this way /system reset-configuration no-defaults=yes run-after-reset=fullconfig.rsc Same conclusion Thanks, Jerry -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://www.butchevans.com/pipermail/mikrotik/attachments/20121206/e412b39a/attachment.html> -------------- next part -------------- A non-text attachment was scrubbed... Name: fullconfig.rsc Type: application/octet-stream Size: 9921 bytes Desc: not available URL: <http://www.butchevans.com/pipermail/mikrotik/attachments/20121206/e412b39a/attachment.obj> _______________________________________________ Mikrotik mailing list [email protected] http://www.butchevans.com/mailman/listinfo/mikrotik Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
