Good morning,
We had to switch on of our core routers from using a single port with vlans to
using bonding. This was because we were hitting the 1gig max for the port.
Since that change we constantly see errors from ospf, many a second. I
modified the logging to at least not show them, but I have not had any luck
fixing the problem.
This is one of the older x86 Mikronoc's with dual-core cpus.
It has been running v5.9 for at least 200 days, before we tried a reboot to see
if it would fix ospf.
Has anybody come across this issue before?
Here is a log snippet:
10:38:51 system,info log rule changed by keith
10:38:51 route,ospf,error Discarding packet: locally originated
10:38:51 route,ospf,error src address=fe80::260:e0ff:fe48:22fe
10:38:51 route,ospf,error Discarding packet: locally originated
10:38:51 route,ospf,error src address=208.84.198.9
10:38:51 route,ospf,error Discarding packet: locally originated
10:38:51 route,ospf,error src address=fe80::260:e0ff:fe48:22fe
10:38:51 route,ospf,error Discarding packet: locally originated
10:38:51 route,ospf,error src address=208.84.198.25
10:38:51 route,ospf,error Discarding packet: locally originated
10:38:51 route,ospf,error src address=fe80::260:e0ff:fe48:22fe
10:38:51 route,ospf,error Discarding packet: locally originated
10:38:51 route,ospf,error src address=208.84.198.230
10:38:51 route,ospf,error Discarding packet: locally originated
10:38:51 route,ospf,error src address=fe80::260:e0ff:fe48:22fe
10:38:51 route,ospf,error Discarding packet: locally originated
10:38:51 route,ospf,error src address=208.84.198.14
10:38:51 route,ospf,error Discarding packet: locally originated
10:38:51 route,ospf,error src address=10.104.72.1
10:38:51 route,ospf,error Discarding packet: locally originated
10:38:51 route,ospf,error src address=208.84.198.2
10:38:52 system,info log rule changed by keith
Bonding config:
0 R name="bonding1" mtu=1500 mac-address=00:60:E0:48:22:FE arp=enabled
slaves=ether6,ether7 mode=balance-rr
primary=none link-monitoring=none arp-interval=100ms mii-interval=100ms
down-delay=0ms up-delay=0ms
lacp-rate=30secs transmit-hash-policy=layer-2
The bond also has 8 vlans running off of it.
Thanks for the help.
-Keith-
_______________________________________________
Mikrotik mailing list
[email protected]
http://mail.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
