I think several MT device report the voltage incorrectly. I have not
see one that far off, but I have several 433AH that report 24.1 or lower
and 3" away at the terminal block I measure 24.8 to 25.
On 8/8/2013 9:34 AM, Ty Featherling wrote:
I have a box I am building out and I just powered everything up for the
first time. All is well except the 493G being powered via a packetflux poe
injector being fed 24V reports it's voltage as 18.3V. I verified that the
POE is in fact putting out 24V so what gives? Is there a voltage regulator
on the router (not likely) or is it just reporting incorrectly?
-Ty
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://mail.butchevans.com/pipermail/mikrotik/attachments/20130808/3b2b370a/attachment.html>
_______________________________________________
Mikrotik mailing list
[email protected]
http://mail.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.3392 / Virus Database: 3209/6559 - Release Date: 08/08/13
--
Scott Reed
Owner
NewWays Networking, LLC
Wireless Networking
Network Design, Installation and Administration
Mikrotik Advanced Certified
www.nwwnet.net
(765) 855-1060
(765) 439-4253
(855) 231-6239
_______________________________________________
Mikrotik mailing list
[email protected]
http://mail.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
