Doesn't sound right then. I'm running it through several different versions of 
M5s with no issues. They are set to bridge with 750gl doing the ospf. The RJ45 
that I talked about was on the cat 5 from the bridge
Plugging into the 750. Not sure what else to tell you

Terri Kelley
Network Engineer
254.697.6710
Farm to Market Broadband

-----Original Message-----
From: Paul McCall <[email protected]>
To: Mikrotik discussions <[email protected]>
Sent: Tue, 25 Feb 2014 7:32 PM
Subject: Re: [Mikrotik] OSPF "problem" situation  #1

Terry,  I tried PTP mode.  It wouldn't stay "up" on that OSPF leg.

Paul

-----Original Message-----
From: [email protected] 
[mailto:[email protected]] On Behalf Of Terri Kelley
Sent: Tuesday, February 25, 2014 8:16 PM
To: Mikrotik discussions
Subject: Re: [Mikrotik] OSPF "problem" situation #1

So a couple of things. Doesn't matter what you put in as a static, ospf will 
still choose it's own so you may see both. Static should take priority though. 
You may want to make the wireless connections point to point in ospf rather 
than broadcast. Seems to be more stable for me. I kept seeing it lose the ospf 
one direction then sometime later it would come back. And finally in my case 
mine would change even though I thought it shouldn't. Then I noticed there were 
some speed issues under load. Turns out an rj45 wasnt on good. That settled the 
whole thing.

Terri Kelley
Network Engineer
254.697.6710
Farm to Market Broadband

-----Original Message-----
From: Paul McCall <[email protected]>
To: Mikrotik discussions <[email protected]>
Sent: Tue, 25 Feb 2014 6:38 PM
Subject: Re: [Mikrotik] OSPF "problem" situation  #1

Costs are all set right, both incoming and outgoing.  The problem is that the 
TIK does not seem to differentiate between the two towers that it could 
possibly go to because they are on the same subnet and same OSPF network.  
That's the problem, in a nutshell 

-----Original Message-----
From: [email protected] 
[mailto:[email protected]] On Behalf Of Scott Reed
Sent: Tuesday, February 25, 2014 6:21 AM
To: Mikrotik discussions
Subject: Re: [Mikrotik] OSPF "problem" situation #1

Not sure what you have setup, but a couple of things come to mind.
A router ID on any router of 0.0.0.0 will cause funny things to happen 
occasionally.  Make sure all routers have an unique ID.
Routes with equal costs will sometimes change.  Make sure you have the costs 
setup correctly on the routers.  Make sure the cost is the same for both 
directions on a link unless you really do want traffic to use a different path 
inbound than outbound.
More specific routes have priority over more general routes.  Not everything 
takes the default route, if there are other ways to get somewhere.
There have been some issues with some levels of UBNT firmware.  If you are a 
WISPA member, check the archives on the mail lists. (If you aren't a WISPA 
member, get signed up as soon as you can.) If you want help offlist, feel free 
to e-mail me directly.

On 2/24/2014 2:34 PM, Paul McCall wrote:
> Tower A has a Rocket M5 feeding Tower B (as its primary OSPF path) and 
> Tower C (as its secondary OSPF Path and that works correctly)
>
> Seemingly since A (xxx.xxx.214.49), B (xxx.xxx.214.50) and C (xxx.xxx.214.51) 
> are on the same subnet and the same OSPF network, sometimes Tower B will go 
> through Tower C before going to Tower A.
>
> Even with a static route from B (214.50) to A (214.49),  the OSPF default 
> route wants to prefer the tower C (214.51) path.   In the IP, Route List it 
> shows that the default should go the right direction with a "distance" of 1.  
> In the OSPF, Routes it shows Tower C (214.51) as the default path with a cost 
> of 1 and a state of Ext 2.
>
> Any thoughts ?
>
>
>
>
> Paul McCall, Pres.
> PDMNet / Florida Broadband
> 658 Old Dixie Highway
> Vero Beach, FL 32962
> 772-564-6800 office
> 772-473-0352 cell
> www.pdmnet.com<http://www.pdmnet.com/>
> [email protected]<mailto:[email protected]>
>
> -------------- next part -------------- An HTML attachment was 
> scrubbed...
> URL: 
> <http://mail.butchevans.com/pipermail/mikrotik/attachments/20140224/67
> e85431/attachment.html>
> _______________________________________________
> Mikrotik mailing list
> [email protected]
> http://mail.butchevans.com/mailman/listinfo/mikrotik
>
> Visit http://blog.butchevans.com/ for tutorials related to Mikrotik 
> RouterOS
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2014.0.4335 / Virus Database: 3705/7120 - Release Date: 
> 02/24/14
>
>

--
Scott Reed
Owner
NewWays Networking, LLC
Wireless Networking
Network Design, Installation and Administration Mikrotik Advanced Certified 
www.nwwnet.net
(765) 855-1060  (765) 439-4253  Toll-free (855) 231-6239


_______________________________________________
Mikrotik mailing list
[email protected]
http://mail.butchevans.com/mailman/listinfo/mikrotik

Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS 
_______________________________________________
Mikrotik mailing list
[email protected]
http://mail.butchevans.com/mailman/listinfo/mikrotik

Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://mail.butchevans.com/pipermail/mikrotik/attachments/20140225/43634dd7/attachment.html>
_______________________________________________
Mikrotik mailing list
[email protected]
http://mail.butchevans.com/mailman/listinfo/mikrotik

Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
_______________________________________________
Mikrotik mailing list
[email protected]
http://mail.butchevans.com/mailman/listinfo/mikrotik

Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://mail.butchevans.com/pipermail/mikrotik/attachments/20140225/5409579a/attachment.html>
_______________________________________________
Mikrotik mailing list
[email protected]
http://mail.butchevans.com/mailman/listinfo/mikrotik

Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS

Reply via email to