The wireless link from Tower A to Tower B is acting as a bridge. No OSPF
involved on those.
Also, there is no loss of OSPF neighbor association. All other IP's on the
Mikrotik at Tower B ping fine, no loss. It's just that one IP on the bridge
interface (x.x.213.1)
The Imagestream is up to date as well...
Here is the OSPF config from Tower A:
/routing ospf instance
set [ find default=yes ] disabled=no distribute-default=never !domain-id
!domain-tag in-filter=ospf-in metric-bgp=auto \
metric-connected=20 metric-default=1 metric-other-ospf=auto metric-rip=20
metric-static=20 !mpls-te-area !mpls-te-router-id \
name=default out-filter=ospf-out redistribute-bgp=no
redistribute-connected=as-type-1 redistribute-other-ospf=no \
redistribute-rip=no redistribute-static=no router-id=x.x.214.1
!routing-table !use-dn
/routing ospf area
set [ find default=yes ] area-id=0.0.0.0 disabled=no instance=default
name=backbone type=def
/routing ospf interface
add authentication=none authentication-key="" authentication-key-id=1 cost=40
dead-interval=
instance-id=0 interface=all network-type=broadcast passive=no priority=1
retransmit-inte
no
add authentication=none authentication-key="" authentication-key-id=1 cost=10
dead-interval=
instance-id=0 interface="ether5 - LB1-Selvitz" network-type=broadcast
passive=no priorit
transmit-delay=1s use-bfd=no
add authentication=none authentication-key="" authentication-key-id=1 cost=10
dead-interval=
instance-id=0 interface="ether7 - LB1-HiddenAcres" network-type=broadcast
passive=no pri
transmit-delay=1s use-bfd=no
add authentication=none authentication-key="" authentication-key-id=1 cost=10
dead-interval=
instance-id=0 interface=WAP_Bridge network-type=broadcast passive=no
priority=1 retransm
use-bfd=no
add authentication=none authentication-key="" authentication-key-id=1 cost=10
dead-interval=
instance-id=0 interface=Fiber network-type=broadcast passive=no priority=1
retransmit-in
use-bfd=no
/routing ospf network
add area=backbone comment=PDMNet disabled=no network=x.x.214.72/29
add area=backbone comment=Hiddenacres disabled=no network=x.x.214.0/29
add area=backbone comment=Selvitz disabled=no network=x.x.214.64/29
add area=backbone comment=WMAPs disabled=no network=x.x.215.112/28
Tower B:
/routing ospf instance
set [ find default=yes ] disabled=no distribute-default=never !domain-id
!domain-tag in-filter=ospf-in \
metric-bgp=auto metric-connected=20 metric-default=1 metric-other-ospf=auto
metric-rip=20 \
metric-static=20 !mpls-te-area !mpls-te-router-id name=default
out-filter=ospf-out redistribute-bgp=no \
redistribute-connected=as-type-1 redistribute-other-ospf=no
redistribute-rip=no redistribute-static=no \
router-id=x.x.214.66 !routing-table !use-dn
/routing ospf area
set [ find default=yes ] area-id=0.0.0.0 disabled=no instance=default
name=backbone type=default
/routing ospf interface
add authentication=none authentication-key="" authentication-key-id=1 cost=10
dead-interval=40s disabled=\
no hello-interval=10s instance-id=0 interface=LAN_Bridge
network-type=broadcast passive=no priority=1 \
retransmit-interval=5s transmit-delay=1s use-bfd=no
add authentication=none authentication-key="" authentication-key-id=1 cost=100
dead-interval=40s disabled=\
no hello-interval=10s instance-id=0 interface="ether2 - HiddenAcres"
network-type=broadcast passive=no \
priority=1 retransmit-interval=5s transmit-delay=1s use-bfd=no
add authentication=none authentication-key="" authentication-key-id=1 cost=5
dead-interval=40s disabled=no \
hello-interval=10s instance-id=0 interface="ether3 - PSLSquare"
network-type=broadcast passive=no \
priority=1 retransmit-interval=5s transmit-delay=1s use-bfd=no
add authentication=none authentication-key="" authentication-key-id=1 cost=10
dead-interval=40s disabled=\
no hello-interval=10s instance-id=0 interface="ether1 - SBA"
network-type=broadcast passive=no \
priority=1 retransmit-interval=5s transmit-delay=1s use-bfd=no
add authentication=none authentication-key="" authentication-key-id=1 cost=10
dead-interval=40s disabled=\
no hello-interval=10s instance-id=0 interface="ether4 - Hobe"
network-type=broadcast passive=no \
priority=1 retransmit-interval=5s transmit-delay=1s use-bfd=no
/routing ospf network
add area=backbone comment=HiddenAcres disabled=no network=x.x.98.96/29
add area=backbone comment="Customer Subnet" disabled=no network=x.x.213.0/26
add area=backbone comment=Hobe disabled=no network=x.x.214.56/29
add area=backbone comment=SBA disabled=no network=x.x.214.64/29
add area=backbone comment=PSLSquare disabled=no network=x.x.215.144/29
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Scott Lambert
Sent: Friday, March 07, 2014 5:15 PM
To: Mikrotik discussions
Subject: Re: [Mikrotik] OSPF Issue
On Wed, Mar 05, 2014 at 08:05:16PM +0000, Justin Marshall wrote:
> Hi,
>
> We are having an OSPF issue. At least i'm assuming it's an OSPF issue
> because there are no static routes involved.
>
> We have our core router (imagestream) connected via Fiber to a
> Mikrotik at Tower A, Which in turn is connected via 2 RB411AH's with
> Atheros AR922X's to a Mikrotik at Tower B. Every 500-1000 pings we
> are loosing pings to 1 of the IP addresses on a bridge interface on
> the Mikrotik at Tower B. When this happens I see an IP address that
> is bound to one of the interfaces on our imagestream, show up on an
> MTR like so...
>
How is the wireless link from Tower A to Tower B configured? Are the RB411s
bridged or do they participate in OSPF? How are the wireless AP and station
interfaces configured?
What is the OSPF interface configuration across the wireless link?
Is the ImageStream up to date?
Are you losing OSPF neighbor associations on the MikroTiks? Should show in the
MikroTik log or you can just see how long the OSPF neighbor association has
been installed.
> Host Loss% Snt
> Last Avg Best Wrst StDev
> 1. 10.192.172.1 0.0% 3642
> 0.7 0.4 0.4 27.1 1.0
> 2. x.x.99.1 0.3% 3642
> 0.8 0.6 0.5 36.5 1.2
> 3. x.x.214.74 0.0% 3642
> 9.7 0.7 0.6 33.4 1.3
> x.x.36.209
> 4. x.x.214.66 0.0% 3642
> 8.0 10.3 0.7 75.1 9.1
> x.x.99.1
> 5. x.x.213.1 0.2% 3642
> 32.7 26.1 0.8 288.3 21.3
> x.x.36.209
>
>
> This is how it should look:
> Host Loss% Snt
> Last Avg Best Wrst StDev
> 1. x.x.172.1 0.0% 4
> 0.8 0.9 0.5 1.4 0.4
> 2. x.x.99.1 0.0% 4
> 0.7 0.8 0.6 1.0 0.2
> 3. x.x.214.74 0.0% 4
> 1.2 1.1 0.7 1.7 0.4
> 4. x.x.214.66 0.0% 3
> 29.8 15.5 5.7 29.8 12.7
> 5. x.x.213.1 0.0% 3
> 15.3 14.4 13.8 15.3 0.8
>
>
> Both Mikrotik's are on 6.7, running OSPF. What we can't figure out is
> why this x.x.36.209 keeps showing up in the route. While this is
> happening, pings come back as: TTL exceeded. Also we aren't loosing
> any pings to any other IP's on the Mikrotik in question at Tower B,
> nor are we loosing pings to any other IP addresses bound to that
> bridge interface.
>
> The IP that we are loosing pings to is a public IP vs the others being
> private and not being in the /routing ospf networks. This may or may
> not be relevant. There is also no NAT involved whatsoever.
I may be interpreting your message incorrectly. Could you clarify if
x.x.36.209 is an IP on an interface on the ImageStream? Or is it on a router
at Tower C which may also be connected to Tower A via a wireless link? I
suspect it is on the ImageStream.
So, only the one subnet is falling out? At the time that you get looping
traceroutes for 213.1, other subnets run clean?
Are you only looping for the one IP in that subnet or for all hosts in the
subnet?
What does "show ip ospf route" look like from the ImageStream for anything in
that /24? During the problem and while normal.
What does "/ip route print where dst-address in x.x.213.0/24" look like on
MikroTik A and B?
Is x.x.213.1 the OSPF router ID of your MikroTik at Tower B? Have you made
sure your all of your OSPF router IDs are all manually specified and unique
within your network?
Does the problem resolve itself after a bit? how long? or do you have to take
some action to clear it?
RouterOS 6.x has been better for us than 5.x for wierd OSPF issues.
But it still seems a bit delicate. Especially if you have a misconfiguration
somewhere or the wrong OSPF network type on a wireless bridge.
--
Scott Lambert KC5MLE Unix SysAdmin
[email protected]
_______________________________________________
Mikrotik mailing list
[email protected]
http://mail.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
_______________________________________________
Mikrotik mailing list
[email protected]
http://mail.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
