Take the config. Factory default the unit. Remove "default" configuration (with 192.168.88.1 and all).
Now copy pasta the config a piece at a time and see where the error is. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Sep 26, 2014 at 11:40 AM, Roy, Jerry <[email protected]> wrote: > Hi All, > > Need some ideas on why certain portions of a config would not be loaded. > > I have created a sort of "smartswitch" config template and I generate a > config from it. Via Winbox I load to MT750 via the System -> Reset > Configuration process where I choose my file under the "Run After Reset" > then click the Reset Configuration" button. It reboots with the IP's and > other bits but I find two things are missing, the default route and the > ipsec policies. > > Any ideas? > > Thanks, > > Jerry Roy > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: < > http://mail.butchevans.com/pipermail/mikrotik/attachments/20140926/4dfa1215/attachment.html > > > _______________________________________________ > Mikrotik mailing list > [email protected] > http://mail.butchevans.com/mailman/listinfo/mikrotik > > Visit http://blog.butchevans.com/ for tutorials related to Mikrotik > RouterOS > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://mail.butchevans.com/pipermail/mikrotik/attachments/20140926/ac277c62/attachment.html> _______________________________________________ Mikrotik mailing list [email protected] http://mail.butchevans.com/mailman/listinfo/mikrotik Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
