For my networks I always set up the Bridge (AP) Side as the one closest to the core network. If I allow the remote side to scan for frequencies then I can change the frequency on the Bridge and the Station then will adjust to connect.
Has helped me a few times when people have stuck up another radio / source of interference and broken an existing link. Regards Alexander Alexander Neilson Neilson Productions Limited [email protected] 021 329 681 022 456 2326 > On 3/10/2014, at 11:22 am, Gary Phillips <[email protected]> wrote: > > When you are setting up Point2Point Links for your Backhaul Does it matter > which side is The AP side and which is the Station side? Should the > backhauls Which are in a big circle all go from station to AP all around the > circle or should they go station to AP up one side of the circle and station > to AP up the other side so the tower at the far end has 2 backhaul links > that are both AP? > > > > STE Wireless Inc > > Gary Phillips > > 402-534-2502 > > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > <http://mail.butchevans.com/pipermail/mikrotik/attachments/20141002/6889ab53/attachment.html> > _______________________________________________ > Mikrotik mailing list > [email protected] > http://mail.butchevans.com/mailman/listinfo/mikrotik > > Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS _______________________________________________ Mikrotik mailing list [email protected] http://mail.butchevans.com/mailman/listinfo/mikrotik Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
