On Fri, Aug 28, 2015 at 11:32:55AM -0500, Terri Kelley wrote: > Guys, > > I can???t figure this one out. Traffic pauses on my three eth > interfaces. > > I have a 2011UiAS with one sfp module S-85DLC05D at the edge of > the area. Another at the other end of the fiber run but we are not > using the link yet. On the edge, I???m running ospf on ether1 and > 2. Default gateway out ether3. All our traffic is running over those > three interfaces. My plan was to move the gateway onto the sfp module > over that fiber link shutting down ether3. > > So testing the fiber link, when I bring up sfp1, traffic on the three > eths will occasionally go to 0 then traffic goes again. It may do it > two or three times in a row then not do it for awhile. If I down sfp1 > then that doesn???t happen. If I shut down the 2011 at the other end > and bring up sfp1, it starts again. > > I am at a loss. I have had three different versions of 6.x in it with > current firmware. Currently on 6.30.4.
Please define "pause". How are you identifying the traffic going to zero? Winbox? What is two or three times in a row? Zero one second, normal or twice normal the next one to five seconds then zero again? If so, that could just be a winbox statistical gathering artifact. Maybe the extra interface makes the statistics gathering take just a smidgen too long. If it's not just a statistical artifact, please be more specific so that we can help make educated guesses. -- Scott Lambert KC5MLE Unix SysAdmin [email protected] _______________________________________________ Mikrotik mailing list [email protected] http://mail.butchevans.com/mailman/listinfo/mikrotik Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
