Thanks a lot. It works now! Sondes
--- Benjamin Thery <[EMAIL PROTECTED]> a écrit : > larafa sondes wrote: > > Yes you are right! I didn't compile it. > > I didn't even select it in the ".config" file when > I > > compiled the kernel. > > Do I have to recompile the kernel or is there any > > other simpler solution? > > No, you don't have to recompile the whole kernel if > you haven't > cleaned your kernel source tree from the previous > build. > > What worked for me is: > 1. make xconfig and select blowfish algo as a module > 2. make (only blowfish got compiled) > 3. make modules_install > 4. run setkey -f yourfile.conf > 5. The freshly compiled blowfish module is > automatically loaded > > Benjamin > > > > > Thanks and regards, > > > > Sondes > > > > > > > > > > --- Benjamin Thery <[EMAIL PROTECTED]> a > écrit : > > > >> Hi, > >> > >> Are you sure you have compiled the blowfish > module > >> in your kernel? > >> I can see the same error message with your > >> configuration on a host > >> where blowfish isn't compiled. It works fine on a > >> host with the > >> blowfish module. > >> > >> Regards, > >> Benjamin > >> > >> > >> larafa sondes wrote: > >>> Hello, > >>> > >>> I am using the following security configuration > >> file > >>> for the MN: > >>> > >>> #sa.conf > >>> > >>> #MN -> HA transport SA for BUs > >>> add 2001:660:3203:1012::5 > 2001:660:3203:1012::beef > >> esp > >>> 2000 > >>> -m transport > >>> -E blowfish-cbc "THIS_IS_ESP_SECRET!!"; > >>> > >>> #HA -> MN transport SA for BAs > >>> add 2001:660:3203:1012::beef > 2001:660:3203:1012::5 > >> esp > >>> 2001 > >>> -m transport > >>> -E blowfish-cbc"THIS_IS_ESP_SECRET!!"; > >>> > >>> #MN -> HA tunnel SA for HoTIs > >>> add 2001:660:3203:1012::5 > 2001:660:3203:1012::beef > >> esp > >>> 2003 > >>> -m tunnel > >>> -E blowfish-cbc"THIS_IS_ESP_SECRET!!"; > >>> > >>> #HA -> MN tunnel SA for HoTs > >>> add 2001:660:3203:1012::beef > 2001:660:3203:1012::5 > >> esp > >>> 2004 > >>> -m tunnel > >>> -E blowfish-cbc"THIS_IS_ESP_SECRET!!"; > >>> > >>> > >>> When I tap: > >>> > >>> setkey -f sa.conf > >>> > >>> I get the following message: > >>> > >>> line 6: Not supported at [THIS_IS_ESP_SECRET!!] > >>> parse failed, line 6. > >>> > >>> Had someone got the same problem and found a > >> solution? > >>> Thanks and regards, > >>> > >>> sondes > >>> > >>> > >>> > >>> > >>> > >>> > >>> > > > ___________________________________________________________________________ > >>> Faites de Yahoo! votre page d'accueil sur le web > >> pour retrouver directement vos services préférés > : > >> vérifiez vos nouveaux mails, lancez vos > recherches > >> et suivez l'actualité en temps réel. > >>> Rendez-vous sur http://fr.yahoo.com/set > >>> > >>> _______________________________________________ > >>> mipl mailing list > >>> [email protected] > >>> > > > http://www.mobile-ipv6.org/cgi-bin/mailman/listinfo/mipl > >> > >> -- > >> B e n j a m i n T h e r y - BULL/DT/Open > Software > >> R&D > >> > >> http://www.bull.com > >> > > > > > > > > > > > > > > > > > ___________________________________________________________________________ > > > Faites de Yahoo! votre page d'accueil sur le web > pour retrouver directement vos services préférés : > vérifiez vos nouveaux mails, lancez vos recherches > et suivez l'actualité en temps réel. > > Rendez-vous sur http://fr.yahoo.com/set > > > -- > B e n j a m i n T h e r y - BULL/DT/Open Software > R&D > > http://www.bull.com > ___________________________________________________________________________ Faites de Yahoo! votre page d'accueil sur le web pour retrouver directement vos services préférés : vérifiez vos nouveaux mails, lancez vos recherches et suivez l'actualité en temps réel. Rendez-vous sur http://fr.yahoo.com/set _______________________________________________ mipl mailing list [email protected] http://www.mobile-ipv6.org/cgi-bin/mailman/listinfo/mipl
