Laliace Bougnat wrote: > Hello everyone, Hi Mathieu,
> I have tested MIPL2.0.2 for a week now. > > My testbed is the following : > My MN is a "wifi" laptop which connects to the network through a Cisco > Aironet 1200 AP. > The AP is connected to a switch which itself is connected to a 2800 IPv6 > router. > I configured some vlans : > ¤vlan 100 is the home network (prefix > 2001:100::/64), the corresponding ssid ont the AP is home_network, Ra > are sent by the Linux HA > ¤vlan 10 is the foreign network (prefix > 2001:10::/64), the corresponding ssid on the AP is stychu, Ra are sent > by the 2800 router. > > > I have made a shell script that "emulates" a roaming between the home > network and the foregn network : first the MN connects itself to the > home network then after 60 sec connects itself to the foreign network > then returns to the home network after 60 sec and so on. > I run MIPv6tester on both MN (client) and HA (server) in order to see > the effect of the handover. > > But when the MN tries to return to the Home Network, the mip6 daemon > indicates a segmentation fault and stops. > > Has anyone get an idea? Could you run mipl in gdb? It would show exactly where the segmentation fault happens. Thanks, Ville _______________________________________________ mipl mailing list [email protected] http://www.mobile-ipv6.org/cgi-bin/mailman/listinfo/mipl
