I had change to global IP-address (just replace fec0 to 2001), but i have
problem whenever i want to go to visitnet, and same thing still happens
(md_expire router and destination unreachable).
this is the ifconfig result on my MN wireless interface before i change to
visitnet network:
[EMAIL PROTECTED] ~]# ifconfig eth1
eth1 Link encap:Ethernet HWaddr 00:13:CE:2D:0C:E2
inet6 addr: 2001:106:2700::4/64 Scope:Global
inet6 addr: fe80::213:ceff:fe2d:ce2/64 Scope:Link
inet6 addr: 2001:106:2700:0:213:ceff:fe2d:ce2/64 Scope:Global
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2386 errors:0 dropped:0 overruns:0 frame:0
TX packets:216 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:45716 (44.6 KiB) TX bytes:37337 (36.4 KiB)
Interrupt:209 Base address:0xc000 Memory:e0000000-e0000fff
it goes accordingly to HOWTO documents. But when i issue the 'iwconfig eth1
essid visitnet' command, it can't capture the new ip address:
[EMAIL PROTECTED] ~]# ifconfig eth1
eth1 Link encap:Ethernet HWaddr 00:13:CE:2D:0C:E2
inet6 addr: fe80::213:ceff:fe2d:ce2/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:892 errors:0 dropped:0 overruns:0 frame:0
TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:73608 (71.8 KiB) TX bytes:56601 (55.2 KiB)
Interrupt:209 Base address:0xc000 Memory:e0000000-e0000fff
and from my MN message:
conf_home_addr_info: Added new home_addr_info successfully
__md_discover_router: discover link on iface eth1 (4)
md_change_default_router: add new router fe80:0:0:0:204:23ff:fe86:848d on
interface eth1 (4)
mn_addr_do_dad: DAD succeeded!
mn_move: 1535
mn_move: in home net
mv_hoa: move HoA 2001:106:2700:0:0:0:0:4/64 from iface 6 to 4
md_expire_router: expiring router fe80:0:0:0:204:23ff:fe86:848d on iface eth1
(4)
it just stuck there and network unreachable. i followed the updated HOWTO
document on this url (both mip6d.conf and radvd.conf):
http://gnist.org/~lars/doc/Mobile-IPv6-HOWTO/Mobile-IPv6-HOWTO.html
this HOWTO based on 2.6.15 kernel, the current one is 2.6.16. Is there any
error in this HOWTO document? I patch my MN and HA to 2.6.16 kernel, the AR i
didn't patch. I'm using fed 5 and 6. During the kernel load, i'm using 'make
oldconfig', but i guess it's nothing wrong with that. Your help is much highly
appreciated.
On 11.12.2006 15:02:50, shariq haseeb <[EMAIL PROTECTED]> wrote:
>Dear saaidal,
>
>Firstly:
>
>You dont get this message
>'vt_server_init: VT server listens 127.0.0.1[7777]OK
>4'
>because you havent enabled the vt server while
>installing the mipl userspace. to install the vt
>server, you have to write in the user space directory.
>
># CPPFLAGS=-I/usr/src/linux/include ./configure
>--enable-vt
># make
># make install
>
>And this has nothing to do with your problem of router
>expire.
>
>Secondly (your main problem):
>
>I think you are using link address "fec0....". Try
>changing to global "eg: 2001::1/64". support for link
>local address has been removed.
>
>It should work.
>
>rgds,
>Shariq
>--- [EMAIL PROTECTED] wrote:
>
>> Hi, i'm having a problem with expire router. I had
>> follow all the instruction the document HOWTO. I
>> successfully ping all my network (Home Agent, MN and
>> AR). This is my test bed:
>>
>> AR========R+HA MN
>>
>> The document test bed said that R and HA is
>> different machine, but i just combined it, i guess
>> that is nothing wrong with it. The problem with the
>> pinging is it only can last about 18-19 minutes (i
>> do not change to visitnet). After that period, all
>> the icmp message will return 'Destination
>> unreachable'. This is my MN message:
>>
>> [EMAIL PROTECTED] ~]# mip6d -c /etc/mipv6/mip6d.conf
>> mip6d[4697]: MIPL Mobile IPv6 for Linux v2.0.2
>> started (Mobile Node)
>> main: MIPL Mobile IPv6 for Linux started in debug
>> mode, not detaching from terminal
>> conf_show: config_file = /etc/mipv6/mip6d.conf
>> conf_show: vt_hostname = localhost
>> conf_show: vt_service = 7777
>> conf_show: mip6_entity = 1
>> conf_show: debug_level = 10
>> conf_show: PolicyModulePath = [internal]
>> conf_show: DefaultBindingAclPolicy = 0
>> conf_show: NonVolatileBindingCache = disabled
>> conf_show: KeyMngMobCapability = disabled
>> conf_show: UseMnHaIPsec = enabled
>> conf_show: MnMaxHaBindingLife = 262140
>> conf_show: MnMaxCnBindingLife = 420
>> conf_show: MnRouterProbes = 1
>> conf_show: MnRouterProbeTimeout = 0.000000
>> conf_show: InitialBindackTimeoutFirstReg = 1.500000
>> conf_show: InitialBindackTimeoutReReg = 1.000000
>> conf_show: UseCnBuAck = disabled
>> conf_show: DoRouteOptimizationMN = enabled
>> conf_show: MnUseAllInterfaces = disabled
>> conf_show: MnDiscardHaParamProb = enabled
>> conf_show: SendMobPfxSols = enabled
>> conf_show: OptimisticHandoff = disabled
>> conf_show: SendMobPfxAdvs = enabled
>> conf_show: SendUnsolMobPfxAdvs = enabled
>> conf_show: MaxMobPfxAdvInterval = 86400
>> conf_show: MinMobPfxAdvInterval = 600
>> conf_show: HaMaxBindingLife = 262140
>> conf_show: DoRouteOptimizationCN = enabled
>> xfrm_cn_init: Adding policies and states for CN
>> xfrm_mn_init: Adding policies and states for MN
>> conf_home_addr_info: HoA address
>> fec0:106:2700:0:0:0:0:4
>> conf_home_addr_info: HA address
>> fec0:106:2700:0:0:0:0:2
>> __tunnel_add: created tunnel ip6tnl1 (6) from
>> fec0:106:2700:0:0:0:0:4 to fec0:106:2700:0:0:0:0:2
>> user count 1
>> conf_home_addr_info: Home address
>> fec0:106:2700:0:0:0:0:4
>> flag_hoa: set HoA fec0:106:2700:0:0:0:0:4/128 iif 6
>> flags 10 preferred_time 4294967295 valid_time
>> 4294967295
>> conf_home_addr_info: Added new home_addr_info
>> successfully
>> __md_discover_router: discover link on iface eth1
>> (5)
>> md_change_default_router: add new router
>> fe80:0:0:0:204:23ff:fe86:848d on interface eth1 (5)
>> mn_addr_do_dad: DAD succeeded!
>> mn_move: 1535
>> mn_move: in home net
>> mv_hoa: move HoA fec0:106:2700:0:0:0:0:4/64 from
>> iface 6 to 5
>> md_expire_router: expiring router
>> fe80:0:0:0:204:23ff:fe86:848d on iface eth1 (5)
>> __md_discover_router: discover link on iface eth1
>> (5)
>> __md_discover_router: discover link on iface eth1
>> (5)
>> __md_discover_router: discover link on iface eth1
>> (5)
>> __md_discover_router: discover link on iface eth1
>> (5)
>> __md_discover_router: discover link on iface eth1
>> (5)
>>
>>
>> As the mesage show 'md_expire_router: expiring
>> router fe80...', all the network become unreachable,
>> but before that it's ok. I just wait and the MN
>> mentioned 'md_discover_router', but the network
>> still unreachable 'pinging not successful'.
>>
>> And also at my HA, after the /etc/init.d/mip6d
>> start, it doesnt show
>> 'vt_server_init: VT server listens 127.0.0.1[7777]
>> OK 4'
>>
>> meaning that it doesn't listen to local host port
>> 7777, is this has anything to do with that? Your
>> help is much highly appreciated.
>>
>> --------------------------------------
>> http://www.um.edu.my
>>
>> _______________________________________________
>> mipl mailing list
>> [email protected]
>>
>http://www.mobile-ipv6.org/cgi-bin/mailman/listinfo/mipl
>>
>
>
>
>
>____________________________________________________________________________________
>Cheap talk?
>Check out Yahoo! Messenger's low PC-to-Phone call rates.
>http://voice.yahoo.com
>
--------------------------------------
http://www.um.edu.my
_______________________________________________
mipl mailing list
[email protected]
http://www.mobile-ipv6.org/cgi-bin/mailman/listinfo/mipl
