On Tue, Feb 24, 2009 at 10:20:00PM +0100, Mitja Kleider wrote: > > I am not sure if you have write access, anyway: > I would like to have write access to the wiki to add some info how to > debootstrap. Registration is disabled.
I haven't checked if you've already done something. Hmmm, according to RSS feed you have :-). > > tell me what you need > I am not sure what I need. What did you do to get wifi? Hmmm, I will upload my /etc/network/interfaces. Wifi is enabled by echo 1 > /proc/jz/iwifi . This turns on a GPIO, which is the same pin as PWM1 if I am correct :-). The GPIO will drive the fet or another transistor that will enable power for the build in zydas wifi dongle. That dongle is the same as the version that is delivered seperately with versions without build in wifi. (The Letux 400 HAS build in wifi, I am talking about hardware that's != Letux 400. Just a note for archive readers). > Are you using 2.4 or 2.6? 2.4, since there are debian show-stopping bugs for 2.6 . I will need to work on 2.6 again. > It seems like my system is not able to open sockets and I do not know why. > What could be the reason? Kernel? > (kernel 2.4.20-celf3 #6 Dec 15 2008, uImage-nand2) I will also upload /etc/modules. Sockets usually mean modprobe unix > > This stuff can kill your minipc! > > Always be prepared to run in your system again. > > Do not ever flash this kernel to your minipc, only boot from sd. > Is this still true for 2.6? I do not know how to "only boot" on > Letux400, I just managed to run "flash and boot". Yes, we need to get some real source for the boatloader, or somehow reverse engineer the uboot keyscan part. -- .signature not found _______________________________________________ Mipsbook-devel mailing list Mipsbook-devel@linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/mipsbook-devel
