On Wed, Jul 01, 2015 at 08:57:17AM -0700, Steve Arnold wrote: > > I know which connector you talk about, and have been wanting to > > plug a cable in there for some time. However, it has very narrow > > pin spacing and I don't have anything that fits it. Where did > > you get a cable for it? > > You should be able to find the cables with individual (ie, > single-pin) connectors on each wire (they are delicate, my boss and > I already broke one each playing with rpi/bbb).
I have those connectors, including single pin, all over the place. But these are smaller, and the single pin connectors will not clamp on them, and touch more than one pin at a time. > Are the pins closer than a normal 4-pin header? I'll have to dig > mine out and see if I have pins or not. I also need to fix that > broken cable... I think they're approximately half the spacing of the regular (2.54 mm) pin headers. On digikey I can find housings that are probably right, but then I also need the connectors and a crimper to attach them to a cable. If I can get a cable with the connector on it from somewhere, that would be much easier. Another option is to solder a cable to the board, but I'd like to avoid that. Thanks, Bas _______________________________________________ Mipsbook-devel mailing list Mipsbook-devel@linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/mipsbook-devel
