Hi Marc, that was what I have done initially but then I fall back to 9600 but also there I did not get anything on the console after 'set tty com0'. To make it clear I can not use the serial nor the keyboard/monitor after that command.
A minute ago I continued to install the server via keyboard/monitor and one of the last question is to enable the serial console com0 which I did. After the following reboot the machine was also not accessible :-) Any more ideas? Martin [EMAIL PROTECTED] schrieb: > Martin Bruns wrote: > >> I'm trying to install OpenBSD 3.7 on a HP ProLiant DL140 server via the >> serial console. >> >> I'm booting via pxeboot and I get the second-stage boot loader prompt on >> the console. >> But after entering "set tty com0", the serial line is nolonger >> functional. >> >> I was searching the net but could only find a different way, I'm a >> newbie in OpenBSD. >> >> Also initially I wanted to have console speed 115200 but that seems to >> be more complicated. > > > You can set the speed of serial console with 'stty com0 <speed>'. > Enter it > before changing the console. > > - Marc Balmer
