Hi, I have a HP DL145-G2. The SCSI card that comes with is supposed to be supported by the mpt driver - the LSI Logic 53c1030 Fusion. It's not.
I also bought a MegaRAID 320-2X which I thought was supposed to be supported by the ami driver, it's not. The MegaRaid has the latest bios, H429 build Feb04, 2005. Tested under both i386 and amd64 (both 3.7 and -current on Aug 2, 2005). Anything that can be jiggled or twigged to make them work? Thanx in advance for your kind help. Btw, what's a hardware RAID card (PCI-X) that is currently on the market that is supported? I've already gotten two strikes even going with what's supported by /amd64.html and /i386.html, so, if anyone has any recommendation, I'd really appreciate it. -Tai lspci -v and dmesg from the install disk follows: ---------8<-------- 82:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID (rev 02) Subsystem: LSI Logic / Symbios Logic MegaRAID 532 SCSI 320-2X RAID Controller Flags: bus master, stepping, 66Mhz, medium devsel, latency 64, IRQ 225 Memory at d8600000 (32-bit, prefetchable) [size=64K] Memory at d8100000 (32-bit, non-prefetchable) [size=512K] Capabilities: [c0] Power Management version 2 Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Capabilities: [e0] PCI-X non-bridge device. 87:01.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07) Subsystem: Compaq Computer Corporation: Unknown device 00f4 Flags: bus master, 66Mhz, medium devsel, latency 128, IRQ 233 I/O ports at 2000 [size=256] Memory at d8220000 (64-bit, non-prefetchable) [size=128K] Memory at d8200000 (64-bit, non-prefetchable) [size=128K] Capabilities: [50] Power Management version 2 Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Capabilities: [68] PCI-X non-bridge device. --------8<------- >> OpenBSD/i386 BOOT 2.06 boot> booting fd0a:/bsd: 4302596+825452=0x4e40b8 entry point at 0x100120* WARNING: CAN'T ALLOCATE RAM (5000-c0000000) FROM IOMEM EXTENT MAP! uvm_page_physload: unable to load physical memory segment 4 segments allocated, ignoring 0x1000 -> 0xbfffc increase VM_PHYSSEG_MAX Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2005 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 3.7 (RAMDISK_CD) #573: Sun Mar 20 00:27:05 MST 2005 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD cpu0: AMD Opteron(tm) Processor 252 ("AuthenticAMD" 686-class) 2.62 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF LUSH,MMX,FXSR,SSE,SSE2,PNI real mem = 2146107392 (2095808K) avail mem = 2772189184 (2707216K) using 4278 buffers containing 280363008 bytes (273792K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(fc) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xfd5f0 pcibios0 at bios0: rev 2.1 @ 0xfd5f0/0xa10 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdec0/288 (16 entries) pcibios0: no compatible PCI ICU found: ICU vendor 0x10de product 0x0051 pcibios0: Warning, unable to fix up PCI interrupt routing pcibios0: PCI bus #4 is the last bus bios0: ROM list: 0xc0000/0xd400 0xcd800/0x1000 0xce800/0x1600 0xd0000/0x1600 0xd 1800/0x2200 0xd4000/0x800 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) vendor "Nvidia", unknown product 0x005e (class memory subclass miscellaneous, re v 0xa3) at pci0 dev 0 function 0 not configured pcib0 at pci0 dev 1 function 0 vendor "Nvidia", unknown product 0x0051 rev 0xa3 vendor "Nvidia", unknown product 0x0052 (class serial bus subclass SMBus, rev 0x a2) at pci0 dev 1 function 1 not configured ohci0 at pci0 dev 2 function 0 vendor "Nvidia", unknown product 0x005a rev 0xa2: irq 10, version 1.0, legacy support ohci0: SMM does not respond, resetting usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: Nvidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered ehci0 at pci0 dev 2 function 1 vendor "Nvidia", unknown product 0x005b rev 0xa3: irq 11 ehci0: timed out waiting for BIOS ehci0: EHCI version 1.0 ehci0: companion controller, 4 ports each: ohci0 usb1 at ehci0: USB revision 2.0 uhub1 at usb1 uhub1: Nvidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub1: single transaction translator uhub1: 4 ports with 4 removable, self powered pciide0 at pci0 dev 6 function 0 vendor "Nvidia", unknown product 0x0053 rev 0xa 2: DMA (unsupported), channel 0 configured to compatibility, channel 1 configure d to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 9.9A> SCSI0 5/cdrom removable pciide0: channel 1 ignored (not responding; disabled or no drives?) pciide1 at pci0 dev 8 function 0 vendor "Nvidia", unknown product 0x0055 rev 0xa 3: DMA (unsupported), channel 0 wired to native-PCI, channel 1 wired to native-P CI pciide1: using irq 10 for native-PCI interrupt pciide1: channel 0 ignored (not responding; disabled or no drives?) pciide1: channel 1 ignored (not responding; disabled or no drives?) ppb0 at pci0 dev 9 function 0 vendor "Nvidia", unknown product 0x005c rev 0xa2 pci1 at ppb0 bus 1 vga1 at pci1 dev 5 function 0 "Nvidia GeForce2 MX" rev 0xb2 wsdisplay0 at vga1: console (80x25, vt100 emulation) ppb1 at pci0 dev 12 function 0 vendor "Nvidia", unknown product 0x005d rev 0xa3 pci2 at ppb1 bus 2 bge0 at pci2 dev 0 function 0 "Broadcom BCM5721" rev 0x11, unknown BCM5750 (0x41 01): irq 11 address 00:14:38:a7:44:86 brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 ppb2 at pci0 dev 13 function 0 vendor "Nvidia", unknown product 0x005d rev 0xa3 pci3 at ppb2 bus 3 bge1 at pci3 dev 0 function 0 "Broadcom BCM5721" rev 0x11, unknown BCM5750 (0x41 01): irq 10 address 00:14:38:a7:44:87 brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 ppb3 at pci0 dev 14 function 0 vendor "Nvidia", unknown product 0x005d rev 0xa3 pci4 at ppb3 bus 4 pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00 pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00 pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00 pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00 pchb4 at pci0 dev 25 function 0 "AMD AMD64 HyperTransport" rev 0x00 pchb5 at pci0 dev 25 function 1 "AMD AMD64 Address Map" rev 0x00 pchb6 at pci0 dev 25 function 2 "AMD AMD64 DRAM Cfg" rev 0x00 pchb7 at pci0 dev 25 function 3 "AMD AMD64 Misc Cfg" rev 0x00 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom0: console biomask ffed netmask ffed ttymask ffef rd0: fixed, 3800 blocks root on rd0a rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02 dmesg: sysctl: KERN_MSGBUFSIZE: Device not configured erase ^?, werase ^W, kill ^U, intr ^C, status ^T (I)nstall, (U)pgrade or (S)hell?
