do you have problem in bash, ksh, csh, emacs ....?
Each of the apps has its own tricks for 8 bit or uft-8
handling.
--- Carlos Zumajo <[EMAIL PROTECTED]> wrote:
> Hi all.
>
> I have installed OpenBSD 3.7 on SparcStation 4. The
> installation process
> finished successfully.
>
> But I have a issue with keyboard. My keyboard is
> type5 spanish. In the
> login field, X or console, I can write the "Q"
> letter. After I login
> with normal user this key don4t work, only beep.
> When I4m root this key
> work as spected, but arrows keys don4t work
>
> From normal user I tried wsconsctl to turn to
> spanish encoding and I
> have no errors, but this key "Q", only beep. I do
> the same with kbd but
> I have no differences.
>
> In a X, I tried XKeycaps, and the keyboard detected
> is a PC with 104
> keys. When I change this by keyboard Sun
> Microsystems Type 5
> OpenWindows Spanish layout and write changes, there
> are no working keys.
> All the keys are mapping different that I can see in
> Xkeycaps. For
> example, if I press "H" the key obtained by xkeycaps
> is "7".
>
> Where is the problem?
>
> This is my first post and I hope to help you in a
> few time. Thank you
> very much.
>
> Carlos.
>
> This is my dmesg result:
>
> OpenBSD 3.7 (GENERIC) #312: Mon Mar 21 00:14:33 MST
> 2005
>
>
[EMAIL PROTECTED]:/usr/src/sys/arch/sparc/compile/GENERIC
> real mem = 33214464
> avail mem = 25190400
> using 200 buffers containing 1658880 bytes of memory
> bootpath:
>
/[EMAIL PROTECTED],10000000/[EMAIL PROTECTED],10001000/[EMAIL
PROTECTED],8400000/[EMAIL PROTECTED],8800000/[EMAIL PROTECTED],0
> mainbus0 (root): SUNW,SPARCstation-4
> cpu0 at mainbus0: MB86904 @ 110 MHz, on-chip FPU
> cpu0: 16K instruction (32 b/l), 8K data (16 b/l)
> cache enabled
> obio0 at mainbus0
> clock0 at obio0 addr 0x71200000: mk48t08 (eeprom)
> timer0 at obio0 addr 0x71d00000 delay constant 52
> zs0 at obio0 addr 0x71100000 pri 12, softpri 6
> zstty0 at zs0 channel 0
> zstty1 at zs0 channel 1
> zs1 at obio0 addr 0x71000000 pri 12, softpri 6
> zskbd0 at zs1 channel 0: keyboard, type 5, layout
> 0x2a
> wskbd0 at zskbd0: console keyboard
> zstty2 at zs1 channel 1: mouse
> slavioconfig at obio0 addr 0x71800000 not configured
> auxreg0 at obio0 addr 0x71900000
> power0 at obio0 addr 0x71910000
> fdc0 at obio0 addr 0x71400000 pri 11, softpri 4:
> chip 82077
> iommu0 at mainbus0 addr 0x10000000: version 0x4/0x0,
> page-size 4096,
> range 64MB
> sbus0 at iommu0: clock = 22 MHz
> dma0 at sbus0 slot 4 offset 0x8400000: rev 2
> esp0 at dma0 offset 0x8800000 pri 4: ESP200, 40MHz,
> SCSI ID 7
> scsibus0 at esp0: 8 targets
> sd0 at scsibus0 targ 3 lun 0: <FUJITSU, MAN3184MC,
> 5508> SCSI3 0/direct
> fixed
> sd0: 17366MB, 29694 cyl, 2 head, 598 sec, 512
> bytes/sec, 35566478 sec total
> cd0 at scsibus0 targ 6 lun 0: <TOSHIBA,
> XM-4101TASUNSLCD, 1755> SCSI2
> 5/cdrom removable
> bpp0 at sbus0 slot 4 offset 0xc800000: DMA2
> ledma0 at sbus0 slot 4 offset 0x8400010: rev 2
> le0 at ledma0 offset 0x8c00000 pri 6: address
> 08:00:20:7b:13:e6
> le0: 16 receive buffers, 4 transmit buffers
> tcx0 at sbus0 slot 2 offset 0x800000: 1152x900, id
> 0, rev 2, sense 0
> wsdisplay0 at tcx0: console (std, sun emulation),
> using wskbd0
> power-management at sbus0 slot 3 offset 0xa000000
> not configured
> root on sd0a
> rootdev=0x700 rrootdev=0x1100 rawdev=0x1102
>
>
____________________________________________________
Start your day with Yahoo! - make it your home page
http://www.yahoo.com/r/hs
