Maybe you can try compiling a 3.8 kernel and see how that works. Jasper
On Sun, 18 Sep 2005 18:49:04 +1000 badmagic <[EMAIL PROTECTED]> wrote: > No, that's not it. I just clipped the wrong part of my dmesg. > It's running under GENERIC kernel. > > > > Bryan Irvine wrote: > > >Maybe because you are using the RAMDISK kernel? Try switching to > >GENERIC, and see if that works better. > > > >--Bryan > > > >On 9/15/05, BadMagic <[EMAIL PROTECTED]> wrote: > > > > > >>Hello, > >> > >>I installed OpenBSD 3.7 (Sparc64) on my Ultra 5 and it's performance is not > >>what I'd expected. I'd recently had Solaris on there (using CDE) and it ran > >>quite quickly but with OpenBSD, when I do an 'ls -la', it takes forever for > >>the screen to scroll through the list and try it via ssh! Slow. I'm using > >>it as a Web server and it's noticably slower at serving pages than the old > >>x86 I had doing the job before was. > >> > >>Anyone know something about this? > >> > >>Regards, > >>sl > >> > >>Here's it's dmesg (This took forEVER): > >>/*--------------------8<--------------------- > >> > >>console is keyboard/display > >>Copyright (c) 1982, 1986, 1989, 1991, 1993 > >> The Regents of the University of California. All rights reserved. > >>Copyright (c) 1995-2005 OpenBSD. All rights reserved. > >>http://www.OpenBSD.org > >> > >>OpenBSD 3.7 (RAMDISK) #344: Sun Mar 20 14:38:37 MST 2005 > >> [EMAIL PROTECTED]:/usr/src/sys/arch/sparc64/compile/RAMDISK > >>total memory = 134217728 > >>avail memory = 112893952 > >>using 819 buffers containing 6709248 bytes of memory > >>bootpath: /[EMAIL PROTECTED],0/[EMAIL PROTECTED],1/[EMAIL > >>PROTECTED],0/[EMAIL PROTECTED],0:f > >>mainbus0 (root): Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 270MHz) > >>cpu0 at mainbus0: SUNW,UltraSPARC-IIi @ 270 MHz, version 0 FPU > >>cpu0: physical 32K instruction (32 b/l), 16K data (32 b/l), 256K external > >>(64 b/l) > >>psycho0 at mainbus0 addr 0xfffc4000 > >>SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 2; PCI bus 0 > >>DVMA map: c0000000 to e0000000 > >>IOTDB: 10bb4000 to 10c34000 > >>pci0 at psycho0 > >>ppb0 at pci0 dev 1 function 1 vendor 0x108e product 0x5000 rev 0x11 > >>pci1 at ppb0 bus 1 > >>ebus0 at pci1 dev 1 function 0 vendor 0x108e product 0x1000 rev 0x01 > >>auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003, > >>72c000-72c003, 72f000-72f003 > >>power at ebus0 addr 724000-724003 ipl 37 not configured > >>SUNW,pll at ebus0 addr 504000-504002 not configured > >>sab0 at ebus0 addr 400000-40007f ipl 43: rev 3.2 > >>sabtty0 at sab0 port 0 > >>sabtty1 at sab0 port 1 > >>comkbd0 at ebus0 addr 3083f8-3083ff ipl 41: layout 34 > >>wskbd0 at comkbd0: console keyboard > >>com0 at ebus0 addr 3062f8-3062ff ipl 42, mouse: ns16550a, 16 byte fifo > >>ecpp at ebus0 addr 3043bc-3043cb, 30015c-30015d, 700000-70000f ipl 34 not > >>configured > >>fdthree at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ipl 39 > >>not configured > >>clock1 at ebus0 addr 0-1fff: mk48t59: hostid 809f8b30 > >>flashprom at ebus0 addr 0-fffff not configured > >>SUNW,CS4231 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f, > >>722000-722003 ipl 35 ipl 36 not configured > >>hme0 at pci1 dev 1 function 1 vendor 0x108e product 0x1001 rev 0x01: > >>address 08:00:20:9f:8b:30 > >>nsphy0 at hme0 phy 1: DP83840 10/100 PHY, rev. 1 > >>hme0: using ivec 3021 for interrupt > >>vgafb0 at pci1 dev 2 function 0 vendor 0x1002 product 0x4754 rev 0x9a > >>wsdisplay0 at vgafb0: console (std, sun emulation), using wskbd0 > >>pciide0 at pci1 dev 3 function 0 vendor 0x1095 product 0x0646 rev 0x03: > >>DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI > >>pciide0: using ivec 1820 for native-PCI interrupt > >>wd0 at pciide0 channel 0 drive 0: <FUJITSU MPD3043AT> > >>wd0: 16-sector PIO, LBA, 4125MB, 8448300 sectors > >>wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 > >>atapiscsi0 at pciide0 channel 1 drive 0 > >>scsibus0 at atapiscsi0: 2 targets > >>cd0 at scsibus0 targ 0 lun 0: <GoldStar, CD-ROM CRD-8240B, 1.24> SCSI0 > >>5/cdrom removable > >>cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 > >>ppb1 at pci0 dev 1 function 0 vendor 0x108e product 0x5000 rev 0x11 > >>pci2 at ppb1 bus 2 > >>pcons at mainbus0 not configured > >>No counter-timer -- using %tick at 270MHz as system clock. > >>rd0: fixed, 6144 blocks > >>root on rd0a > >>rootdev=0x500 rrootdev=0x3d00 rawdev=0x3d02 > >> > >>--------------------8<----------------------*/ > -- "Security is decided by quality" -- Theo de Raadt
