Hi,
I'm having an issue where video playback in mplayer is sluggish in
full-screen mode with Radeon HD 4200 onboard video. This applies only
to -current, with either i386 or amd64. In 4.8-stable (amd64 or i386),
Mplayer is perfectly fine in either normal or full-screen mode on the
same hardware. x.org.conf, dmesg, xdpyinfo and xvinfo files are below.
Mplayer is the same version between 4.8 and -current, but the X.Org
version goes from 1.8.2 to 1.9.3. Googling for "mplayer + x.org 1.9.3 +
radeon hd 4200" doesn't yield anything useful, and the archives only
offer tedu@'s post about using "gl" instead of "x11" for Intel chipsets.
I've tried all "vo=" modes available, including "x11", "xv", "gl" and
"gl2". x11 works "best", but video playback appears to be somewhat less
than 1.00 speed. All frames appear correctly without any distortion,
just slower than normal, as if the frame rate was lowered. Audio is
fine but out of sync, of course.
Has anyone else experienced similar problems / found solutions? I can't
find any setting in the man page that corrects this behaviour, but it's
worth noting that for full-screen to work, the "zoom=1" setting has to
be enabled, even for -stable.
I'm out of gas on this.
- Scott
xvinfo for both -current and 4.8-stable only gives:
$ cat xvinfo.output
X-Video Extension version 2.2
screen #0
no adaptors present
xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/OTF/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
EndSection
Section "Module"
Load "dbe"
Load "dri"
Load "dri2"
Load "extmod"
Load "glx"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "wsmouse"
Option "Device" "/dev/wsmouse"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 450 280 # mm
Identifier "Monitor0"
VendorName "HWP"
ModelName "HP f2105"
HorizSync 30.0 - 94.0
VertRefresh 48.0 - 85.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # <i>
#Option "DepthBits" # <i>
#Option "PCIAPERSize" # <i>
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # <i>
#Option "RageTheatreCrystal" # <i>
#Option "RageTheatreTunerPort" # <i>
#Option "RageTheatreCompositePort" # <i>
#Option "RageTheatreSVideoPort" # <i>
#Option "TunerType" # <i>
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # <i>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
#Option "R4xxATOM" # [<bool>]
Identifier "Card0"
Driver "radeon"
BusID "PCI:1:5:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSubSection
EndSection
dmesg:
OpenBSD 4.9-current (BLACKSTAFF.MP) #1: Wed Mar 23 23:22:50 EDT 2011
sc...@blackstaff.blackstaff.ca:/usr/src/sys/arch/i386/compile/BLACKSTAFF.MP
cpu0: AMD Phenom(tm) II X6 1100T Processor ("AuthenticAMD" 686-class,
512KB L2 cache) 3.32 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX
16,POPCNT
real mem = 3487719424 (3326MB)
avail mem = 3420508160 (3262MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/18/10, BIOS32 rev. 0 @ 0xf0010,
SMBIOS rev. 2.5 @ 0x9f000 (68 entries)
bios0: vendor American Megatrends Inc. version "2103" date 06/18/2010
bios0: ASUSTeK Computer INC. M4A785TD-V EVO
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG OEMB SRAT HPET SSDT
acpi0: wakeup devices PCE2(S4) PCE3(S4) PCE4(S4) PCE5(S4) PCE6(S4)
PCE7(S4) PCE9(S4) PCEA(S4) PCEB(S4) PCEC(S4) SBAZ(S4)
PS2M(S4) PS2K(S4) UAR1(S4) P0PC(S4) UHC1(S4) UHC2(S4) UHC3(S4)
USB4(S4) UHC5(S4) UHC6(S4) UHC7(S4)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 200MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Phenom(tm) II X6 1100T Processor ("AuthenticAMD" 686-class,
512KB L2 cache) 3.32 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX
16,POPCNT
cpu2 at mainbus0: apid 2 (application processor)
cpu2: AMD Phenom(tm) II X6 1100T Processor ("AuthenticAMD" 686-class,
512KB L2 cache) 3.32 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX
16,POPCNT
cpu3 at mainbus0: apid 3 (application processor)
cpu3: AMD Phenom(tm) II X6 1100T Processor ("AuthenticAMD" 686-class,
512KB L2 cache) 3.32 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX
16,POPCNT
cpu4 at mainbus0: apid 4 (application processor)
cpu4: AMD Phenom(tm) II X6 1100T Processor ("AuthenticAMD" 686-class,
512KB L2 cache) 3.32 GHz
cpu4:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX
16,POPCNT
cpu5 at mainbus0: apid 5 (application processor)
cpu5: AMD Phenom(tm) II X6 1100T Processor ("AuthenticAMD" 686-class,
512KB L2 cache) 3.32 GHz
cpu5:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX
16,POPCNT
ioapic0 at mainbus0: apid 6 pa 0xfec00000, version 21, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P1)
acpiprt2 at acpi0: bus -1 (PCE2)
acpiprt3 at acpi0: bus -1 (PCE3)
acpiprt4 at acpi0: bus -1 (PCE4)
acpiprt5 at acpi0: bus -1 (PCE5)
acpiprt6 at acpi0: bus -1 (PCE6)
acpiprt7 at acpi0: bus -1 (PCE7)
acpiprt8 at acpi0: bus -1 (PCE9)
acpiprt9 at acpi0: bus 2 (PCEA)
acpiprt10 at acpi0: bus 3 (P0PC)
acpicpu0 at acpi0: C2, PSS
acpicpu1 at acpi0: C2, PSS
acpicpu2 at acpi0: C2, PSS
acpicpu3 at acpi0: C2, PSS
acpicpu4 at acpi0: C2, PSS
acpicpu5 at acpi0: C2, PSS
aibs0 at acpi0: RTMP RVLT RFAN GGRP GITM SITM
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xee00
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "AMD RS780 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 vendor "Asustek", unknown product 0x9602
rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Radeon HD 4200" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: apic 6 int 18 (irq 10)
drm0 at radeondrm0
azalia0 at pci1 dev 5 function 1 "ATI Radeon HD 4200 HD Audio" rev 0x00:
apic 6 int 19 (irq 10)
azalia0: no supported codecs
azalia0: initialization failure, detaching
ppb1 at pci0 dev 10 function 0 "AMD RS780 PCIE" rev 0x00: apic 6 int 18
(irq 10)
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D
(0x2800), apic 6 int 18 (irq 10), address 20:cf:30:
b0:06:02
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 6 int 22
(irq 11), AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD5000AAKS-0, 05.0> SCSI3
0/direct fixed
sd0: 476940MB, 512 bytes/sec, 976773168 sec total
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 6 int 16
(irq 10), version 1.0, legacy support
ohci1 at pci0 dev 18 function 1 "ATI SB700 USB" rev 0x00: apic 6 int 16
(irq 10), version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 6 int 17
(irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci2 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 6 int 18
(irq 10), version 1.0, legacy support
ohci3 at pci0 dev 19 function 1 "ATI SB700 USB" rev 0x00: apic 6 int 18
(irq 10), version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 6 int 19
(irq 10)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x3c: SMI
iic0 at piixpm0
iic0: addr 0x20 01=19 02=24 03=2e 04=00 05=00 06=00 07=00 08=00 09=00
0a=10 0b=10 0c=10 0d=10 0e=16 0f=88 10=3d 11=00 12
=00 13=00 14=0a 15=0a 16=2c 17=a0 18=e0 1a=ae 1b=a4 1c=b3 1d=00 1e=0c
1f=01 20=09 21=09 22=09 23=09 24=bb 3e=03 words 00
=ff19 01=1924 02=242e 03=2e00 04=0000 05=0000 06=0000 07=0000
spdmem0 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-10600
spdmem1 at iic0 addr 0x53: 2GB DDR3 SDRAM PC3-10600
pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x00: DMA, channel
0 configured to compatibility, channel 1 config
ured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4163B, AX13> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4
azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic 6
int 16 (irq 10)
azalia1: codecs: VIA/0x0397
audio0 at azalia1
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x00
ppb2 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
pci3 at ppb2 bus 3
"VIA VT6306 FireWire" rev 0xc0 at pci3 dev 8 function 0 not configured
ohci4 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 6 int 18
(irq 10), version 1.0, legacy support
pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci2: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci3: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8712F rev 8, EC port 0x290
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb6 at ohci4: USB revision 1.0
uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 5 configuration 1 interface 0 " USB Flash Memory"
rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <, USB Flash Memory, 1.00> SCSI2 0/direct
removable
sd1: 15287MB, 512 bytes/sec, 31309760 sec total
uhub7 at uhub4 port 3 "Dell Dell USB Keyboard Hub" rev 1.10/2.00 addr 2
uhidev0 at uhub7 port 1 configuration 1 interface 0 "Dell Dell USB
Keyboard" rev 1.10/2.00 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub7 port 1 configuration 1 interface 1 "Dell Dell USB
Keyboard" rev 1.10/2.00 addr 3
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 3: input=3, output=0, feature=0
uhidev2 at uhub5 port 1 configuration 1 interface 0 "Logitech USB
Optical Mouse" rev 2.00/43.01 addr 2
uhidev2: iclass 3/1
ums0 at uhidev2: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
