sounds similar to http://marc.info/?l=openbsd-misc&m=129104388909427 http://marc.info/?l=openbsd-tech&m=129104820617203
see follow-ups, too. [email protected] (Ahmad Zulkarnain), 2011.03.29 (Tue) 07:17 (CEST): > Hi, > > I just bought a new ZTE MF190 HSUPA USB modem for my 4.8 machine. I > saw a few supported ZTE USB modem and I tried using this modem without > success. Using "cu -l cuaU(0-2)" just display "connected" and hangs > there. I would be glad if there's a pointer on how to get the modem > working in 4.8. Here's the dmesg: > > umsm0 at uhub0 port 3 configuration 1 interface 0 "ZTE,Incorporated > ZTE WCDMA Technologies MSM" rev 2.00/0.00 addr 5 > umsm0 detached > umsm0 at uhub0 port 3 configuration 1 interface 0 "ZTE,Incorporated > ZTE WCDMA Technologies MSM" rev 2.00/0.00 addr 5 > ucom0 at umsm0 > umsm1 at uhub0 port 3 configuration 1 interface 1 "ZTE,Incorporated > ZTE WCDMA Technologies MSM" rev 2.00/0.00 addr 5 > ucom1 at umsm1 > umass1 at uhub0 port 3 configuration 1 interface 2 "ZTE,Incorporated > ZTE WCDMA Technologies MSM" rev 2.00/0.00 addr 5 > umass1: using SCSI over Bulk-Only > scsibus1 at umass1: 2 targets, initiator 0 > cd1 at scsibus1 targ 1 lun 0: <ZTE, USB SCSI CD-ROM, 2.31> SCSI2 > 5/cdrom removable > umsm2 at uhub0 port 3 configuration 1 interface 3 "ZTE,Incorporated > ZTE WCDMA Technologies MSM" rev 2.00/0.00 addr 5 > ucom2 at umsm2 > > > And here's the usbdevs -v output: > > $ usbdevs -v > Controller /dev/usb0: > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered > port 3 addr 5: high speed, power 500 mA, config 1, ZTE WCDMA > Technologies MSM(0x0031), ZTE,Incorporated(0x19d2), rev 0.00, > iSerialNumber P671A1CELD010000 > port 4 powered > port 5 addr 2: high speed, self powered, config 1, USB2 Hub(0x6560), > Cypress Semiconductor(0x04b4), rev 0.0b > port 1 addr 3: high speed, self powered, config 1, USB Multibay IDE > 2.466(0x031d), Hewlett Packard(0x03f0), rev 2.46, iSerialNumber > HH63MC0BLTC1 > port 2 powered > port 3 powered > port 4 addr 4: low speed, power 98 mA, config 1, USB-PS/2 Optical > Mouse(0xc03d), Logitech(0x046d), rev 20.00 > port 6 powered > port 7 powered > port 8 powered > Controller /dev/usb1: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 poweredController /dev/usb2: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered > Controller /dev/usb3: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered > > In XP, the USB modem will have some sort of virtual CDRom which act as > the provider's (Celcom) software installer. Here's a bit of info about > the modem on ZTE's web: > > * UMTS/HSDPA/WCDMA 2100MHz > * GSM/GPRS/EDGE 850/900/1800/1900MHz > * Support HSDPA up to 7.2Mbps, HSUPA up to 2Mbps > * Dimensions: 76mm * 26mm * 11mm(without cap) > 90mm * 26mm * 11mm(with cap)" > * Weight :21g > * Operating Temperature:-10 to 60B0 C > * Storage Temperature:-40 to 80B0 C > * Approvals &Certification:CE,GCF,FC,ROHS,WHQL. > * Storage Capacity: Up to 4G Micro-SD card > * Solution:Chipset supplier:Qualcomm > Chipset:MSM6290 > * USB VersionUSB 2.0 HIGH SPEED > * Maximum power consumption 2.5W > * Power supply:5v > > Thanks in advance. > > -- > Ahmad Zulkarnain
