[email protected] (Daniel Gracia), 2011.03.29 (Tue) 09:42 (CEST): > Yep, that sounds totally right. The same over here with a ZTE > MF110UP; just updated the pertinent usb files and got it working.
let us all have it, diff -u to tech@, prego. > ZTE seems to have a very broad range of product (numbers) over there. which partly do not even exist on their website[1], just as yours. [1] http://www.zte.com.cn/ > El 29/03/2011 9:27, MERIGHI Marcus escribis: > >sounds similar to > > > >http://marc.info/?l=openbsd-misc&m=129104388909427 > >http://marc.info/?l=openbsd-tech&m=129104820617203 > > > >see follow-ups, too. > > > >[email protected] (Ahmad Zulkarnain), 2011.03.29 (Tue) 07:17 (CEST): > >>Hi, > >> > >>I just bought a new ZTE MF190 HSUPA USB modem for my 4.8 machine. I > >>saw a few supported ZTE USB modem and I tried using this modem without > >>success. Using "cu -l cuaU(0-2)" just display "connected" and hangs > >>there. I would be glad if there's a pointer on how to get the modem > >>working in 4.8. Here's the dmesg: > >> > >>umsm0 at uhub0 port 3 configuration 1 interface 0 "ZTE,Incorporated > >>ZTE WCDMA Technologies MSM" rev 2.00/0.00 addr 5 > >>umsm0 detached > >>umsm0 at uhub0 port 3 configuration 1 interface 0 "ZTE,Incorporated > >>ZTE WCDMA Technologies MSM" rev 2.00/0.00 addr 5 > >>ucom0 at umsm0 > >>umsm1 at uhub0 port 3 configuration 1 interface 1 "ZTE,Incorporated > >>ZTE WCDMA Technologies MSM" rev 2.00/0.00 addr 5 > >>ucom1 at umsm1 > >>umass1 at uhub0 port 3 configuration 1 interface 2 "ZTE,Incorporated > >>ZTE WCDMA Technologies MSM" rev 2.00/0.00 addr 5 > >>umass1: using SCSI over Bulk-Only > >>scsibus1 at umass1: 2 targets, initiator 0 > >>cd1 at scsibus1 targ 1 lun 0:<ZTE, USB SCSI CD-ROM, 2.31> SCSI2 > >>5/cdrom removable > >>umsm2 at uhub0 port 3 configuration 1 interface 3 "ZTE,Incorporated > >>ZTE WCDMA Technologies MSM" rev 2.00/0.00 addr 5 > >>ucom2 at umsm2 > >> > >> > >>And here's the usbdevs -v output: > >> > >>$ usbdevs -v > >>Controller /dev/usb0: > >>addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), > >>Intel(0x8086), rev 1.00 > >> port 1 powered > >> port 2 powered > >> port 3 addr 5: high speed, power 500 mA, config 1, ZTE WCDMA > >>Technologies MSM(0x0031), ZTE,Incorporated(0x19d2), rev 0.00, > >>iSerialNumber P671A1CELD010000 > >> port 4 powered > >> port 5 addr 2: high speed, self powered, config 1, USB2 Hub(0x6560), > >>Cypress Semiconductor(0x04b4), rev 0.0b > >> port 1 addr 3: high speed, self powered, config 1, USB Multibay IDE > >>2.466(0x031d), Hewlett Packard(0x03f0), rev 2.46, iSerialNumber > >>HH63MC0BLTC1 > >> port 2 powered > >> port 3 powered > >> port 4 addr 4: low speed, power 98 mA, config 1, USB-PS/2 Optical > >>Mouse(0xc03d), Logitech(0x046d), rev 20.00 > >> port 6 powered > >> port 7 powered > >> port 8 powered > >>Controller /dev/usb1: > >>addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > >>Intel(0x8086), rev 1.00 > >> port 1 powered > >> port 2 poweredController /dev/usb2: > >>addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > >>Intel(0x8086), rev 1.00 > >> port 1 powered > >> port 2 powered > >>Controller /dev/usb3: > >>addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > >>Intel(0x8086), rev 1.00 > >> port 1 powered > >> port 2 powered > >> > >>In XP, the USB modem will have some sort of virtual CDRom which act as > >>the provider's (Celcom) software installer. Here's a bit of info about > >>the modem on ZTE's web: > >> > >> * UMTS/HSDPA/WCDMA 2100MHz > >> * GSM/GPRS/EDGE 850/900/1800/1900MHz > >> * Support HSDPA up to 7.2Mbps, HSUPA up to 2Mbps > >> * Dimensions: 76mm * 26mm * 11mm(without cap) > >> 90mm * 26mm * 11mm(with cap)" > >> * Weight :21g > >> * Operating Temperature:-10 to 60B0 C > >> * Storage Temperature:-40 to 80B0 C > >> * Approvals&Certification:CE,GCF,FC,ROHS,WHQL. > >> * Storage Capacity: Up to 4G Micro-SD card > >> * Solution:Chipset supplier:Qualcomm > >> Chipset:MSM6290 > >> * USB VersionUSB 2.0 HIGH SPEED > >> * Maximum power consumption 2.5W > >> * Power supply:5v > >> > >>Thanks in advance. > >> > >>-- > >>Ahmad Zulkarnain > -- https://www.Tor.AT/~McMer/.signature Ich untersage hiermit a) die Verwendung meiner personenbezogenen Daten zu anderen Zwecken als den in diesem Vorgang gegenstaendlichen sowie b) die Weitergabe meiner personenbezogenen Daten. Die Nichtbefolgung dieser Anweisung ist in Oesterreich gesetzeswidrig. Siehe hiezu das Datenschutzgesetz (DSG) 2000 idgF., zu finden u.a. unter: http://ris.bka.gv.at/GeltendeFassung.wxe?Abfrage=Bundesnormen&Gesetzesnummer=10001597
