Hello misc,
I am installing several HP DL320G6 servers and see there are some problems
with the Network Adapter that is shared with ILO2 .
When openbsd boots the ILO adapter becomes unavailable and within openbsd the
interface bge0 is not usable. It's connected at 10BaseT but in real it's
connected at 1000baseT .
Ifconfig :
bge0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr 1c:c1:de:f9:c6:50
priority: 0
media: Ethernet autoselect (10baseT full-duplex)
status: active
See below dmesg output :
OpenBSD 4.9 (GENERIC.MP) #794: Wed Mar 2 07:19:02 MST 2011
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(R) CPU E5502 @ 1.87GHz ("GenuineIntel" 686-class) 1.87
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3
,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT
real mem = 3747340288 (3573MB)
avail mem = 3675897856 (3505MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000,
SMBIOS rev. 2.7 @ 0xdf7fe000 (134 entries)
bios0: vendor HP version "W07" date 01/29/2011
bios0: HP ProLiant DL320 G6
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP SPCR MCFG HPET FFFF SPMI ERST APIC SRAT FFFF BERT HEST
DMAR SSDT SSDT SSDT
acpi0: wakeup devices PCI0(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 16 (boot processor)
cpu0: apic clock running at 133MHz
cpu1 at mainbus0: apid 20 (application processor)
cpu1: Intel(R) Xeon(R) CPU E5502 @ 1.87GHz ("GenuineIntel" 686-class) 1.87
GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3
,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 0 pa 0xfec80000, version 20, 24 pins
acpiprt0 at acpi0: bus 1 (IP2P)
acpiprt1 at acpi0: bus 3 (NIB1)
acpiprt2 at acpi0: bus 4 (IPT5)
acpiprt3 at acpi0: bus -1 (PRB2)
acpiprt4 at acpi0: bus 10 (PT07)
acpiprt5 at acpi0: bus 7 (PT03)
acpiprt6 at acpi0: bus 13 (PT01)
acpiprt7 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: C3, C3, C1
acpicpu1 at acpi0: C3, C3, C1
acpitz0 at acpi0: critical temperature 31 degC
bios0: ROM list: 0xc0000/0xb000 0xcb000/0x4000! 0xcf000/0x1a00
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 5500 Host" rev 0x13
ppb0 at pci0 dev 1 function 0 "Intel X58 PCIE" rev 0x13
pci1 at ppb0 bus 13
bnx0 at pci1 dev 0 function 0 "Broadcom BCM5709" rev 0x20: apic 0 int 4 (irq
7)
bnx1 at pci1 dev 0 function 1 "Broadcom BCM5709" rev 0x20: apic 0 int 16 (irq
11)
ppb1 at pci0 dev 3 function 0 "Intel X58 PCIE" rev 0x13
pci2 at ppb1 bus 7
ppb2 at pci0 dev 7 function 0 "Intel X58 PCIE" rev 0x13
pci3 at ppb2 bus 10
ciss0 at pci3 dev 0 function 0 "Hewlett-Packard Smart Array" rev 0x01: apic 0
int 6 (irq 7)
ciss0: 1 LD, HW rev 2, FW 3.00/3.00, 64bit fifo rro
scsibus0 at ciss0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <HP, LOGICAL VOLUME, 3.00> SCSI3 0/direct fixed
sd0: 286070MB, 512 bytes/sec, 585871964 sec total
pchb1 at pci0 dev 13 function 0 vendor "Intel", unknown product 0x343a rev
0x13
pchb2 at pci0 dev 13 function 1 vendor "Intel", unknown product 0x343b rev
0x13
pchb3 at pci0 dev 13 function 2 vendor "Intel", unknown product 0x343c rev
0x13
pchb4 at pci0 dev 13 function 3 vendor "Intel", unknown product 0x343d rev
0x13
pchb5 at pci0 dev 13 function 4 "Intel 5520/X58 QuickPath" rev 0x13
pchb6 at pci0 dev 13 function 5 "Intel 5520 QuickPath" rev 0x13
pchb7 at pci0 dev 13 function 6 vendor "Intel", unknown product 0x341a rev
0x13
pchb8 at pci0 dev 14 function 0 vendor "Intel", unknown product 0x341c rev
0x13
pchb9 at pci0 dev 14 function 1 vendor "Intel", unknown product 0x341d rev
0x13
pchb10 at pci0 dev 14 function 2 vendor "Intel", unknown product 0x341e rev
0x13
pchb11 at pci0 dev 14 function 3 vendor "Intel", unknown product 0x341f rev
0x13
pchb12 at pci0 dev 14 function 4 vendor "Intel", unknown product 0x3439 rev
0x13
"Intel X58 Misc" rev 0x13 at pci0 dev 20 function 0 not configured
"Intel X58 GPIO" rev 0x13 at pci0 dev 20 function 1 not configured
"Intel X58 RAS" rev 0x13 at pci0 dev 20 function 2 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801JI USB" rev 0x00: apic 8 int 20
(irq 5)
uhci1 at pci0 dev 26 function 1 "Intel 82801JI USB" rev 0x00: apic 8 int 23
(irq 7)
uhci2 at pci0 dev 26 function 2 "Intel 82801JI USB" rev 0x00: apic 8 int 22
(irq 10)
ehci0 at pci0 dev 26 function 7 "Intel 82801JI USB" rev 0x00: apic 8 int 22
(irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 28 function 0 "Intel 82801JI PCIE" rev 0x00
pci4 at ppb3 bus 2
ppb4 at pci4 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5
pci5 at ppb4 bus 3
bge0 at pci5 dev 4 function 0 "Broadcom BCM5715" rev 0xa3, BCM5715 A3
(0x9003): apic 8 int 16 (irq 7), address 1c:c1:de:f9:c6:50
brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
bge1 at pci5 dev 4 function 1 "Broadcom BCM5715" rev 0xa3, BCM5715 A3
(0x9003): apic 8 int 17 (irq 11), address 1c:c1:de:f9:c6:51
brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
ppb5 at pci0 dev 28 function 4 "Intel 82801JI PCIE" rev 0x00
pci6 at ppb5 bus 4
uhci3 at pci0 dev 29 function 0 "Intel 82801JI USB" rev 0x00: apic 8 int 20
(irq 5)
uhci4 at pci0 dev 29 function 1 "Intel 82801JI USB" rev 0x00: apic 8 int 23
(irq 7)
uhci5 at pci0 dev 29 function 2 "Intel 82801JI USB" rev 0x00: apic 8 int 22
(irq 10)
ehci1 at pci0 dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 8 int 20
(irq 5)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb6 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x90
pci7 at ppb6 bus 1
vga1 at pci7 dev 3 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: apic 8 int 23 (irq 7)
drm0 at radeondrm0
"Compaq iLO" rev 0x03 at pci7 dev 4 function 0 not configured
"Compaq iLO" rev 0x03 at pci7 dev 4 function 2 not configured
uhci6 at pci7 dev 4 function 4 "Hewlett-Packard USB" rev 0x00: apic 8 int 22
(irq 10)
"Hewlett-Packard IPMI" rev 0x00 at pci7 dev 4 function 6 not configured
usb2 at uhci6: USB revision 1.0
uhub2 at usb2 "Hewlett-Packard UHCI root hub" rev 1.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel 82801JIR LPC" rev 0x00
pciide0 at pci0 dev 31 function 2 "Intel 82801JI SATA" rev 0x00: DMA, channel
0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 8 int 17 (irq 11) for native-PCI interrupt
pciide1 at pci0 dev 31 function 5 "Intel 82801JI SATA" rev 0x00: DMA, channel
0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 8 int 17 (irq 11) for native-PCI interrupt
usb3 at uhci0: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci1: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci2: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci3: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci4: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb8 at uhci5: USB revision 1.0
uhub8 at usb8 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com1: probed fifo depth: 0 bytes
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhidev0 at uhub2 port 1 configuration 1 interface 0 "HP Virtual Keyboard" rev
1.10/0.02 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes, country code 33
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 1 configuration 1 interface 1 "HP Virtual Keyboard" rev
1.10/0.02 addr 2
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
bnx0: address 1c:c1:de:7a:ef:1c
brgphy2 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
bnx1: address 1c:c1:de:7a:ef:1e
brgphy3 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
Thanks,
Peter
