Hi all
I see some issues ospf not distributing trunk connected networks.
ospfctl shows trunk0 as down but it is up and running. Check outputs.
$ ospfctl sh inter
Interface Address State HelloTimer Linkstate Uptime nc ac
tun0 172.16.20.2/24 OTHER 00:00:05 active 00:19:07 2 2
trunk0 192.168.202.1/24 DOWN - unknown 00:00:00 0 0
vlan20 192.168.201.33/30 BCKUP 00:00:04 unknown 00:19:07 1 1
$ ifconfig trunk0
trunk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:00:24:c9:2d:2c
priority: 0
trunk: trunkproto lacp
trunk id: [(8000,00:00:24:c9:2d:2c,403B,0000,0000),
(FFFF,00:00:00:00:00:00,0000,0000,0000)]
trunkport vr1 active,collecting,distributing
trunkport vr0 active,collecting,distributing
groups: trunk
media: Ethernet autoselect
status: active
inet 192.168.202.1 netmask 0xffffff00 broadcast 192.168.202.255
inet6 fe80::200:24ff:fec9:2d2c%trunk0 prefixlen 64 scopeid 0x7
sniplet ospfd.conf
...
no redistribute default
no redistribute static
redistribute connected
area 0.0.0.20 {
interface trunk0 {
passive
}
interface tun0
}
...
Also snmpd shows trunk ports as unknown. It looks like trunk ports are
not reporting states to other processes like snmp, ospf etc.
Is this a known feature on 4.8 and fixed in 4.9 or new to be 5.0?
Regards
Robert BlacquiC(re
