Hey kids.
I'm running a snapshot from a week or so ago:
OpenBSD 5.0 GENERIC#39
I have a Netgear WG111 v2 USB wifi adapter that might be supported
according to urtw(4) but only gets ugen status.
I haven't used this thing for a long time and can't remember previous status.
Is there any procedure I need to do or should I assume it's unsupported?
Best wishes.
OpenBSD 5.0 (GENERIC) #39: Mon Aug 8 14:53:43 MDT 2011
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 731 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PSE36,SER,MMX,FXSR,SSE
real mem = 266858496 (254MB)
avail mem = 252444672 (240MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/05/01, BIOS32 rev. 0 @
0xfd87d, SMBIOS rev. 2.2 @ 0xe4010 (42 entries)
bios0: vendor Phoenix Technologies Ltd. version "IP.01.08US" date 12/05/2001
bios0: Hewlett-Packard HP Vectra
apm0 at bios0: Power Management spec V1.2
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xfd810/0x7f0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf30/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xa000 0xe0000/0x4000! 0xe4000/0xc000!
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82815 Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82815 Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xf0000000, size 0x4000000
ppb0 at pci0 dev 30 function 0 "Intel 82801AA Hub-to-PCI" rev 0x02
pci1 at ppb0 bus 1
xl0 at pci1 dev 4 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 7,
address 00:01:03:03:c3:8c
bmtphy0 at xl0 phy 24: 3C905C internal PHY, rev. 7
ichpcib0 at pci0 dev 31 function 0 "Intel 82801AA LPC" rev 0x02:
24-bit timer at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801AA IDE" rev 0x02: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD80EB-28CGH2>
wd0: 16-sector PIO, LBA, 7633MB, 15633072 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <ATAPI-CD, ROM-DRIVE-52MAX, 52E4> ATAPI
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801AA USB" rev 0x02: irq 11
ichiic0 at pci0 dev 31 function 3 "Intel 82801AA SMBus" rev 0x02: irq 9
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 128MB SDRAM non-parity PC133CL2
spdmem1 at iic0 addr 0x51: 128MB SDRAM non-parity PC133CL2
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4: polled
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
ugen0 at uhub0 port 1 "GlobespanVirata NETGEAR WG111" rev 2.00/10.20 addr 2
uhub1 at uhub0 port 2 "ALCOR Generic USB Hub" rev 1.10/3.12 addr 3
uhidev0 at uhub1 port 2 configuration 1 interface 0 "Microsoft
Microsoft Basic Optical Mouse v2.0" rev 1.10/1.99 addr 4
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub1 port 4 configuration 1 interface 0 "NOVATEK USB
Keyboard" rev 1.10/1.12 addr 5
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub1 port 4 configuration 1 interface 1 "NOVATEK USB
Keyboard" rev 1.10/1.12 addr 5
uhidev2: iclass 3/0, 4 report ids
uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev2 reportid 3: input=3, output=0, feature=0
uhid2 at uhidev2 reportid 4: input=2, output=0, feature=0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (01f39c01585cc992.a) swap on wd0b dump on wd0b
wsdisplay0: screen 6 added (80x25, vt100 emulation)
wsdisplay0: screen 7 added (80x25, vt100 emulation)
wsdisplay0: screen 8 added (80x25, vt100 emulation)
wsdisplay0: screen 9 added (80x25, vt100 emulation)
wsdisplay0: screen 10 added (80x25, vt100 emulation)
wsdisplay0: screen 11 added (80x25, vt100 emulation)
wsmouse0 detached
ums0 detached
uhidev0 detached
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev1 detached
uhid0 detached
uhid1 detached
uhid2 detached
uhidev2 detached
uhub1 detached
uhub1 at uhub0 port 2 "ALCOR Generic USB Hub" rev 1.10/3.12 addr 3
uhidev0 at uhub1 port 2 configuration 1 interface 0 "Microsoft
Microsoft Basic Optical Mouse v2.0" rev 1.10/1.99 addr 4
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub1 port 4 configuration 1 interface 0 "NOVATEK USB
Keyboard" rev 1.10/1.12 addr 5
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub1 port 4 configuration 1 interface 1 "NOVATEK USB
Keyboard" rev 1.10/1.12 addr 5
uhidev2: iclass 3/0, 4 report ids
uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev2 reportid 3: input=3, output=0, feature=0
uhid2 at uhidev2 reportid 4: input=2, output=0, feature=0
