Hi, post output of 'usbdevs -v' command. Install usbutil package as well and post output of 'usbctl -a 2 -f /dev/usb0'
$ pkg_info usbutil Information for inst:usbutil-0.5p0 Comment: USB developer utilities Description: USB developer utilities: usbctl Dump information about devices on a USB bus. usbdebug Set the kernel debugging flag. usbgen Dump descriptors of a generic device. usbgen -f ugenN -v -D usbstats Gives statistics for a USB host controller. Maintainer: The OpenBSD ports mailing-list <po...@openbsd.org> $ On Sat, Aug 20, 2011 at 5:19 PM, David Walker <davidianwal...@gmail.com> wrote: > Hey kids. > > I'm running a snapshot from a week or so ago: > OpenBSD 5.0 GENERIC#39 > > I have a Netgear WG111 v2 USB wifi adapter that might be supported > according to urtw(4) but only gets ugen status. > I haven't used this thing for a long time and can't remember previous status. > > Is there any procedure I need to do or should I assume it's unsupported? > > Best wishes. > > OpenBSD 5.0 (GENERIC) #39: Mon Aug B 8 14:53:43 MDT 2011 > B dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC > cpu0: Intel Pentium III ("GenuineIntel" 686-class) 731 MHz > cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PSE36,SER,MMX,FXSR,S SE > real mem B = 266858496 (254MB) > avail mem = 252444672 (240MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 12/05/01, BIOS32 rev. 0 @ > 0xfd87d, SMBIOS rev. 2.2 @ 0xe4010 (42 entries) > bios0: vendor Phoenix Technologies Ltd. version "IP.01.08US" date 12/05/2001 > bios0: Hewlett-Packard HP Vectra > apm0 at bios0: Power Management spec V1.2 > acpi at bios0 function 0x0 not configured > pcibios0 at bios0: rev 2.1 @ 0xfd810/0x7f0 > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf30/176 (9 entries) > pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00) > pcibios0: PCI bus #1 is the last bus > bios0: ROM list: 0xc0000/0xa000 0xe0000/0x4000! 0xe4000/0xc000! > cpu0 at mainbus0: (uniprocessor) > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "Intel 82815 Host" rev 0x02 > vga1 at pci0 dev 2 function 0 "Intel 82815 Video" rev 0x02 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > intagp0 at vga1 > agp0 at intagp0: aperture at 0xf0000000, size 0x4000000 > ppb0 at pci0 dev 30 function 0 "Intel 82801AA Hub-to-PCI" rev 0x02 > pci1 at ppb0 bus 1 > xl0 at pci1 dev 4 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 7, > address 00:01:03:03:c3:8c > bmtphy0 at xl0 phy 24: 3C905C internal PHY, rev. 7 > ichpcib0 at pci0 dev 31 function 0 "Intel 82801AA LPC" rev 0x02: > 24-bit timer at 3579545Hz > pciide0 at pci0 dev 31 function 1 "Intel 82801AA IDE" rev 0x02: DMA, > channel 0 wired to compatibility, channel 1 wired to compatibility > wd0 at pciide0 channel 0 drive 0: <WDC WD80EB-28CGH2> > wd0: 16-sector PIO, LBA, 7633MB, 15633072 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > atapiscsi0 at pciide0 channel 1 drive 0 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <ATAPI-CD, ROM-DRIVE-52MAX, 52E4> ATAPI > 5/cdrom removable > cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 > uhci0 at pci0 dev 31 function 2 "Intel 82801AA USB" rev 0x02: irq 11 > ichiic0 at pci0 dev 31 function 3 "Intel 82801AA SMBus" rev 0x02: irq 9 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 128MB SDRAM non-parity PC133CL2 > spdmem1 at iic0 addr 0x51: 128MB SDRAM non-parity PC133CL2 > isa0 at ichpcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4: polled > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > usb0 at uhci0: USB revision 1.0 > uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > mtrr: Pentium Pro MTRR support > ugen0 at uhub0 port 1 "GlobespanVirata NETGEAR WG111" rev 2.00/10.20 addr 2 > uhub1 at uhub0 port 2 "ALCOR Generic USB Hub" rev 1.10/3.12 addr 3 > uhidev0 at uhub1 port 2 configuration 1 interface 0 "Microsoft > Microsoft Basic Optical Mouse v2.0" rev 1.10/1.99 addr 4 > uhidev0: iclass 3/1 > ums0 at uhidev0: 3 buttons, Z dir > wsmouse0 at ums0 mux 0 > uhidev1 at uhub1 port 4 configuration 1 interface 0 "NOVATEK USB > Keyboard" rev 1.10/1.12 addr 5 > uhidev1: iclass 3/1 > ukbd0 at uhidev1: 8 modifier keys, 6 key codes > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev2 at uhub1 port 4 configuration 1 interface 1 "NOVATEK USB > Keyboard" rev 1.10/1.12 addr 5 > uhidev2: iclass 3/0, 4 report ids > uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0 > uhid1 at uhidev2 reportid 3: input=3, output=0, feature=0 > uhid2 at uhidev2 reportid 4: input=2, output=0, feature=0 > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > scsibus2 at softraid0: 256 targets > root on wd0a (01f39c01585cc992.a) swap on wd0b dump on wd0b > wsdisplay0: screen 6 added (80x25, vt100 emulation) > wsdisplay0: screen 7 added (80x25, vt100 emulation) > wsdisplay0: screen 8 added (80x25, vt100 emulation) > wsdisplay0: screen 9 added (80x25, vt100 emulation) > wsdisplay0: screen 10 added (80x25, vt100 emulation) > wsdisplay0: screen 11 added (80x25, vt100 emulation) > wsmouse0 detached > ums0 detached > uhidev0 detached > wskbd1: disconnecting from wsdisplay0 > wskbd1 detached > ukbd0 detached > uhidev1 detached > uhid0 detached > uhid1 detached > uhid2 detached > uhidev2 detached > uhub1 detached > uhub1 at uhub0 port 2 "ALCOR Generic USB Hub" rev 1.10/3.12 addr 3 > uhidev0 at uhub1 port 2 configuration 1 interface 0 "Microsoft > Microsoft Basic Optical Mouse v2.0" rev 1.10/1.99 addr 4 > uhidev0: iclass 3/1 > ums0 at uhidev0: 3 buttons, Z dir > wsmouse0 at ums0 mux 0 > uhidev1 at uhub1 port 4 configuration 1 interface 0 "NOVATEK USB > Keyboard" rev 1.10/1.12 addr 5 > uhidev1: iclass 3/1 > ukbd0 at uhidev1: 8 modifier keys, 6 key codes > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev2 at uhub1 port 4 configuration 1 interface 1 "NOVATEK USB > Keyboard" rev 1.10/1.12 addr 5 > uhidev2: iclass 3/0, 4 report ids > uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0 > uhid1 at uhidev2 reportid 3: input=3, output=0, feature=0 > uhid2 at uhidev2 reportid 4: input=2, output=0, feature=0