i agree lets try again!
hi folks
> Date: Fri, 1 Jun 2012 10:55:09 -0700
> From: [email protected]
> To: [email protected]
> Subject: Re: ipsec routing dinamic ip over adsl
>
> On 5/31/2012 7:31 PM, carlos albino garcia grijalba wrote:
i have the following problem
remote office connect to my vpn server in order to connect to the internals
over the ipsec tunnel the office has ip
phones
to connect to call manager over the 192.168.0.0/16 the ip phone
192.168.30.2/28 so the ip phone connect correct but thereis another ip
client a watch the people wants to excract info from the watch who is
over the net 172.1.100.1 th PC that whants to connect to runs over the
10.0.0.89 but i can reach the watch and the watch can not ping over the
172 address space the clientit is a cisco router over ADSL line so
DInamic public IP is on172.1.100.1 --X192.168.30.2--OK
vpn openbsd server
ipsec.conf
ike passive esp from any to {192.168.0.0/16, 10.0.0.0/16, 172.1.0.0/16} peer
any \
main auth hmac-sha1 enc aes-128 group modp1024 \
quick auth hmac-sha1 enc aes-128 psk 1234ABC
ike passive from {192.168.0.0/16, 10.0.0.0/16, 172.1.0.0/16} to any \
main auth hmac-sha1 enc aes-128 group modp1024 \
quick auth hmac-sha1 enc aes-128 psk 1234ABC
ifconfig
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:11:85:f1:cb:6b
priority: 0
groups: egress
media: Ethernet autoselect (1000baseT full-duplex)
status: active
inet A.B.C.D netmask 0xffffff00 broadcast 148.235.89.255
inet6 fe80::211:85ff:fef1:cb6b%bge0 prefixlen 64 scopeid 0x1
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:22:6b:bd:8a:1e
priority: 0
media: Ethernet autoselect (1000baseT full-duplex)
status: active
inet 10.0.0.1 netmask 0xffffff00 broadcast 10.0.0.255
inet6 fe80::222:6bff:febd:8a1e%re0 prefixlen 64 scopeid 0x2
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:50:bf:05:3f:6b
priority: 0
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet 192.168.100.210 netmask 0xffffff00 broadcast 192.168.100.255
inet6 fe80::250:bfff:fe05:3f6b%rl0 prefixlen 64 scopeid 0x3
enc0: flags=0<>
priority: 0
groups: enc
status: active
ipsecctl -sall
FLOWS:
flow esp in from 192.168.30.0/28 to 192.168.0.0/16 peer 187.131.59.237 srcid
148.235.89.18/32 dstid 187.131.59.237/32 type use
flow
esp out from 192.168.0.0/16 to 192.168.30.0/28 peer 187.131.59.237
srcid 148.235.89.18/32 dstid 187.131.59.237/32 type require
SAD:
esp tunnel from 187.131.59.237 to 148.235.89.18 spi 0xbed90da8 auth hmac-sha1
enc aes
esp tunnel from 148.235.89.18 to 187.131.59.237 spi 0xda01bfaa auth hmac-sha1
enc aes
netstat -nr -f encap
Routing tables
Encap:
Source Port Destination Port Proto
SA(Address/Proto/Type/Direction)
192.168.30.0/28 0 192.168/16 0 0
187.131.59.237/esp/use/in
192.168/16 0 192.168.30.0/28 0 0
187.131.59.237/esp/require/out
