Hello.
Recently I tried to run two X servers on i386 OpenBSD-5.2:
ttyC2$ startx -- :0 OK
ttyC3$ startx -- :1 but this server was aborted due to segmentation fault
I succesfully ran two X servers on previous versions of i386 OpenBSD and
linux
without problems.
Please tell me what I'm doing wrong?
--
Alexei Malinin
My current environment is:
- machdep.allowaperture is set to 2
- there is no /etc/X11/xorg.conf
dmesg:
------
OpenBSD 5.2 (GENERIC) #278: Wed Aug 1 10:04:16 MDT 2012
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1.60GHz ("GenuineIntel" 686-class) 1.60
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
real mem = 1063710720 (1014MB)
avail mem = 1035472896 (987MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/01/06, BIOS32 rev. 0 @ 0xfd760, SMBIOS
rev. 2.33 @ 0xe0010 (60 entries)
bios0: vendor IBM version "1VET71WW (1.29 )" date 12/01/2006
bios0: IBM 2887K2G
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT TCPA BOOT
acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) PCI0(S3) PCI1(S4) DOCK(S4)
USB0(S3) USB1(S3) USB2(S3) AC9M(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (PCI1)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpipwrres0 at acpi0: PUBS
acpitz0 at acpi0: critical temperature is 94 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "IBM-08K8193" serial 11607 type LION oem "SANYO"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
acpidock0 at acpi0: DOCK not docked (0)
bios0: ROM list: 0xc0000/0xd000! 0xcd000/0x1000 0xce000/0x1000 0xdc000/0x4000!
0xe0000/0x10000
cpu0 at mainbus0: (uniprocessor)
cpu0: Enhanced SpeedStep 1595 MHz: speeds: 1600, 1400, 1200, 1000, 800, 600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82855GM Host" rev 0x02
"Intel 82855GM Memory" rev 0x02 at pci0 dev 0 function 1 not configured
"Intel 82855GM Config" rev 0x02 at pci0 dev 0 function 3 not configured
vga1 at pci0 dev 2 function 0 "Intel 82855GM Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x8000000
inteldrm0 at vga1: irq 3
drm0 at inteldrm0
"Intel 82855GM Video" rev 0x02 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 3
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 6
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 5
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81
pci1 at ppb0 bus 2
mem address conflict 0xb0000000/0x1000
mem address conflict 0xb1000000/0x800
cbb0 at pci1 dev 0 function 0 "TI PCI4510 CardBus" rev 0x03: irq 3
"TI PCI4510 FireWire" rev 0x01 at pci1 dev 0 function 1 not configured
em0 at pci1 dev 1 function 0 "Intel PRO/1000MT Mobile (82541GI)" rev 0x00: irq
7, address 00:11:25:d6:1b:59
iwi0 at pci1 dev 2 function 0 "Intel PRO/Wireless 2200BG" rev 0x05: irq 9,
address 00:12:f0:bc:00:76
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST960821A>
wd0: 16-sector PIO, LBA48, 57231MB, 117210240 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, RW/DVD GCC-4241N, 1.04> ATAPI 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x01: irq 4
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM non-parity PC2700CL2.5
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 4, ICH4 AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 5.9
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (194861497ffaa8a0.a) swap on wd0b dump on wd0b
wsdisplay0: screen 1 deleted
wsdisplay0: screen 1 added (80x25bf, vt100 emulation)
wsdisplay0: screen 2 deleted
wsdisplay0: screen 2 added (80x25bf, vt100 emulation)
wsdisplay0: screen 3 deleted
wsdisplay0: screen 3 added (80x25bf, vt100 emulation)
wsdisplay0: screen 4 deleted
wsdisplay0: screen 4 added (80x25bf, vt100 emulation)
wsdisplay0: screen 5 deleted
startx-0.log:
-------------
xauth: (stdin):1: bad display name "mc.amt.ru:0" in "add" command
X.Org X Server 1.12.2
Release Date: 2012-05-29
X Protocol Version 11, Revision 0
Build Operating System: OpenBSD 5.2 i386
Current Operating System: OpenBSD mc.amt.ru 5.2 GENERIC#278 i386
Build Date: 22 July 2012 10:21:16PM
Current version of pixman: 0.24.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 2 19:56:52 2012
(==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d"
is crt
is lvds
is lvds
is crt
is lvds
is crt
xinit: connection to X server lost
waiting for X server to shut down .Server terminated successfully (0). Closing
log file.
xauth: (argv):1: bad display name "mc.amt.ru:0" in "remove" command
Xorg.0.log:
-----------
[ 205.400] (--) checkDevMem: using aperture driver /dev/xf86
[ 205.411] (--) Using wscons driver on /dev/ttyC2 in pcvt compatibility mode
(version 3.32)
[ 206.433]
X.Org X Server 1.12.2
Release Date: 2012-05-29
[ 206.433] X Protocol Version 11, Revision 0
[ 206.433] Build Operating System: OpenBSD 5.2 i386
[ 206.433] Current Operating System: OpenBSD mc.amt.ru 5.2 GENERIC#278 i386
[ 206.433] Build Date: 22 July 2012 10:21:16PM
[ 206.433]
[ 206.433] Current version of pixman: 0.24.4
[ 206.433] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 206.433] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 206.433] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 2 19:56:52
2012
[ 206.434] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d"
[ 206.434] (==) No Layout section. Using the first Screen section.
[ 206.434] (==) No screen section available. Using defaults.
[ 206.434] (**) |-->Screen "Default Screen Section" (0)
[ 206.434] (**) | |-->Monitor "<default monitor>"
[ 206.434] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 206.434] (==) Disabling SIGIO handlers for input devices
[ 206.434] (==) Automatically adding devices
[ 206.434] (==) Automatically enabling devices
[ 206.434] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[ 206.434] (==) ModulePath set to "/usr/X11R6/lib/modules"
[ 206.434] (II) The server relies on wscons to provide the list of input
devices.
If no devices become available, reconfigure wscons or disable
AutoAddDevices.
[ 206.435] (II) Loader magic: 0x3c021020
[ 206.435] (II) Module ABI versions:
[ 206.435] X.Org ANSI C Emulation: 0.4
[ 206.435] X.Org Video Driver: 12.0
[ 206.435] X.Org XInput driver : 16.0
[ 206.435] X.Org Server Extension : 6.0
[ 206.435] (--) PCI:*(0:0:2:0) 8086:3582:1014:0557 rev 2, Mem @
0xe0000000/134217728, 0xd0000000/524288, I/O @ 0x00001800/8
[ 206.435] (--) PCI: (0:0:2:1) 8086:3582:1014:0557 rev 2, Mem @
0xe8000000/134217728, 0xd0080000/524288
[ 206.435] (II) LoadModule: "extmod"
[ 206.436] (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
[ 206.436] (II) Module extmod: vendor="X.Org Foundation"
[ 206.436] compiled for 1.12.2, module version = 1.0.0
[ 206.436] Module class: X.Org Server Extension
[ 206.436] ABI class: X.Org Server Extension, version 6.0
[ 206.436] (II) Loading extension MIT-SCREEN-SAVER
[ 206.436] (II) Loading extension XFree86-VidModeExtension
[ 206.436] (II) Loading extension XFree86-DGA
[ 206.436] (II) Loading extension DPMS
[ 206.436] (II) Loading extension XVideo
[ 206.436] (II) Loading extension XVideo-MotionCompensation
[ 206.436] (II) Loading extension X-Resource
[ 206.436] (II) LoadModule: "dbe"
[ 206.437] (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
[ 206.437] (II) Module dbe: vendor="X.Org Foundation"
[ 206.437] compiled for 1.12.2, module version = 1.0.0
[ 206.437] Module class: X.Org Server Extension
[ 206.437] ABI class: X.Org Server Extension, version 6.0
[ 206.437] (II) Loading extension DOUBLE-BUFFER
[ 206.437] (II) LoadModule: "glx"
[ 206.438] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[ 206.439] (II) Module glx: vendor="X.Org Foundation"
[ 206.439] compiled for 1.12.2, module version = 1.0.0
[ 206.439] ABI class: X.Org Server Extension, version 6.0
[ 206.439] (==) AIGLX enabled
[ 206.439] (II) Loading extension GLX
[ 206.439] (II) LoadModule: "record"
[ 206.439] (II) Loading /usr/X11R6/lib/modules/extensions/librecord.so
[ 206.440] (II) Module record: vendor="X.Org Foundation"
[ 206.440] compiled for 1.12.2, module version = 1.13.0
[ 206.440] Module class: X.Org Server Extension
[ 206.440] ABI class: X.Org Server Extension, version 6.0
[ 206.440] (II) Loading extension RECORD
[ 206.440] (II) LoadModule: "dri"
[ 206.441] (II) Loading /usr/X11R6/lib/modules/extensions/libdri.so
[ 206.441] (II) Module dri: vendor="X.Org Foundation"
[ 206.441] compiled for 1.12.2, module version = 1.0.0
[ 206.441] ABI class: X.Org Server Extension, version 6.0
[ 206.441] (II) Loading extension XFree86-DRI
[ 206.441] (II) LoadModule: "dri2"
[ 206.442] (II) Loading /usr/X11R6/lib/modules/extensions/libdri2.so
[ 206.442] (II) Module dri2: vendor="X.Org Foundation"
[ 206.442] compiled for 1.12.2, module version = 1.2.0
[ 206.442] ABI class: X.Org Server Extension, version 6.0
[ 206.442] (II) Loading extension DRI2
[ 206.442] (==) Matched intel as autoconfigured driver 0
[ 206.442] (==) Matched vesa as autoconfigured driver 1
[ 206.442] (==) Assigned the driver to the xf86ConfigLayout
[ 206.442] (II) LoadModule: "intel"
[ 206.443] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
[ 206.444] (II) Module intel: vendor="X.Org Foundation"
[ 206.444] compiled for 1.12.2, module version = 2.12.0
[ 206.444] Module class: X.Org Video Driver
[ 206.444] ABI class: X.Org Video Driver, version 12.0
[ 206.444] (II) LoadModule: "vesa"
[ 206.445] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
[ 206.445] (II) Module vesa: vendor="X.Org Foundation"
[ 206.445] compiled for 1.12.2, module version = 2.3.1
[ 206.445] Module class: X.Org Video Driver
[ 206.445] ABI class: X.Org Video Driver, version 12.0
[ 206.445] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server
[ 206.445] (II) VESA: driver for VESA chipsets: vesa
[ 206.445] (WW) Falling back to old probe method for vesa
[ 206.446] (II) Loading sub module "vgahw"
[ 206.446] (II) LoadModule: "vgahw"
[ 206.447] (II) Loading /usr/X11R6/lib/modules/libvgahw.so
[ 206.447] (II) Module vgahw: vendor="X.Org Foundation"
[ 206.447] compiled for 1.12.2, module version = 0.1.0
[ 206.447] ABI class: X.Org Video Driver, version 12.0
[ 206.447] (II) Loading sub module "ramdac"
[ 206.447] (II) LoadModule: "ramdac"
[ 206.447] (II) Module "ramdac" already built-in
[ 206.447] drmOpenDevice: node name is /dev/drm0
[ 206.447] drmOpenDevice: open result is 10, (OK)
[ 206.448] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 206.448] drmOpenDevice: node name is /dev/drm0
[ 206.448] drmOpenDevice: open result is 10, (OK)
[ 206.448] drmOpenByBusid: drmOpenMinor returns 10
[ 206.448] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 206.448] (II) intel(0): Creating default Display subsection in Screen
section
"Default Screen Section" for depth/fbbpp 24/32
[ 206.448] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 206.448] (==) intel(0): RGB weight 888
[ 206.448] (==) intel(0): Default visual is TrueColor
[ 206.448] (II) intel(0): Integrated Graphics Chipset: Intel(R) 852GM/855GM
[ 206.448] (--) intel(0): Chipset: "852GM/855GM"
[ 206.448] (--) intel(0): Linear framebuffer at 0xE0000000
[ 206.448] (--) intel(0): IO registers at addr 0xD0000000 size 524288
[ 206.448] (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
[ 206.448] (II) intel(0): No SDVO device is found in VBT
[ 206.448] (II) intel(0): 2 display pipes available.
[ 206.448] (II) Loading sub module "ddc"
[ 206.448] (II) LoadModule: "ddc"
[ 206.448] (II) Module "ddc" already built-in
[ 206.449] (II) Loading sub module "i2c"
[ 206.449] (II) LoadModule: "i2c"
[ 206.449] (II) Module "i2c" already built-in
[ 206.449] (II) intel(0): Output VGA has no monitor section
[ 206.449] (II) intel(0): Output LVDS has no monitor section
[ 206.449] (II) intel(0): I2C bus "LVDSDDC_C" initialized.
[ 206.449] (II) intel(0): Attempting to determine panel fixed mode.
[ 206.449] (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address
0xA0.
[ 206.453] (II) intel(0): EDID for output LVDS
[ 206.453] (II) intel(0): I2C bus "DVODDC_D" initialized.
[ 206.453] (II) Loading sub module "sil164"
[ 206.453] (II) LoadModule: "sil164"
[ 206.454] (II) Loading /usr/X11R6/lib/modules/drivers/sil164.so
[ 206.454] (II) Module sil164: vendor="X.Org Foundation"
[ 206.454] compiled for 1.12.2, module version = 1.0.0
[ 206.454] ABI class: X.Org Video Driver, version 12.0
[ 206.454] (II) intel(0): I2C bus "DVOI2C_E" initialized.
[ 206.455] (II) Loading sub module "ch7xxx"
[ 206.455] (II) LoadModule: "ch7xxx"
[ 206.455] (II) Loading /usr/X11R6/lib/modules/drivers/ch7xxx.so
[ 206.455] (II) Module ch7xxx: vendor="X.Org Foundation"
[ 206.455] compiled for 1.12.2, module version = 1.0.0
[ 206.455] ABI class: X.Org Video Driver, version 12.0
[ 206.455] (II) intel(0): I2C bus "DVOI2C_E" removed.
[ 206.455] (II) intel(0): I2C bus "DVOI2C_E" initialized.
[ 206.456] (II) Loading sub module "ivch"
[ 206.456] (II) LoadModule: "ivch"
[ 206.456] (II) Loading /usr/X11R6/lib/modules/drivers/ivch.so
[ 206.457] (II) Module ivch: vendor="X.Org Foundation"
[ 206.457] compiled for 1.12.2, module version = 1.0.0
[ 206.457] ABI class: X.Org Video Driver, version 12.0
[ 206.457] (II) intel(0): I2C bus "DVOI2C_E" removed.
[ 206.457] (II) intel(0): I2C bus "DVOI2C_B" initialized.
[ 206.457] (II) Loading sub module "tfp410"
[ 206.457] (II) LoadModule: "tfp410"
[ 206.458] (II) Loading /usr/X11R6/lib/modules/drivers/tfp410.so
[ 206.458] (II) Module tfp410: vendor="X.Org Foundation"
[ 206.458] compiled for 1.12.2, module version = 1.0.0
[ 206.458] ABI class: X.Org Video Driver, version 12.0
[ 206.458] (II) intel(0): I2C bus "DVOI2C_B" removed.
[ 206.458] (II) intel(0): I2C bus "DVOI2C_E" initialized.
[ 206.459] (II) Loading sub module "ch7017"
[ 206.459] (II) LoadModule: "ch7017"
[ 206.459] (II) Loading /usr/X11R6/lib/modules/drivers/ch7017.so
[ 206.460] (II) Module ch7017: vendor="X.Org Foundation"
[ 206.460] compiled for 1.12.2, module version = 1.0.0
[ 206.460] ABI class: X.Org Video Driver, version 12.0
[ 206.460] (II) intel(0): I2C bus "DVOI2C_E" removed.
[ 206.460] (II) intel(0): I2C bus "DVOI2C_E" initialized.
[ 206.461] (II) intel(0): I2C bus "DVOI2C_E" removed.
[ 206.461] (II) intel(0): I2C bus "DVODDC_D" removed.
[ 206.599] is crt
[ 206.819] (II) intel(0): I2C bus "CRTDDC_A" initialized.
[ 206.820] (II) intel(0): I2C bus "CRTDDC_A" removed.
[ 207.239] (II) intel(0): EDID for output VGA
[ 207.243] (II) intel(0): EDID for output LVDS
[ 207.243] (II) intel(0): Printing probed modes for output LVDS
[ 207.243] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184
1344 768 771 777 806 (48.4 kHz P)
[ 207.243] (II) intel(0): Output VGA disconnected
[ 207.243] (II) intel(0): Output LVDS connected
[ 207.243] (II) intel(0): Using exact sizes for initial modes
[ 207.243] (II) intel(0): Output LVDS using initial mode 1024x768
[ 207.243] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless
otherwise stated.
[ 207.822] (II) intel(0): detected 128 kB GTT.
[ 207.822] (II) intel(0): detected 8060 kB stolen memory.
[ 207.822] (==) intel(0): video overlay key set to 0x101fe
[ 207.822] (==) intel(0): DPI set to (96, 96)
[ 207.822] (II) Loading sub module "fb"
[ 207.822] (II) LoadModule: "fb"
[ 207.823] (II) Loading /usr/X11R6/lib/modules/libfb.so
[ 207.824] (II) Module fb: vendor="X.Org Foundation"
[ 207.824] compiled for 1.12.2, module version = 1.0.0
[ 207.824] ABI class: X.Org ANSI C Emulation, version 0.4
[ 207.824] (II) UnloadModule: "vesa"
[ 207.824] (II) Unloading vesa
[ 207.825] (==) Depth 24 pixmap format is 32 bpp
[ 207.825] (II) intel(0): Kernel reported 241152 total, 0 used
[ 207.825] (II) intel(0): I830CheckAvailableMemory: 964608 kB available
[ 207.825] (II) intel(0): [DRI2] Setup complete
[ 207.825] (II) intel(0): [DRI2] DRI driver: i915
[ 207.825] (**) intel(0): Framebuffer tiled
[ 207.825] (**) intel(0): Pixmaps tiled
[ 207.825] (**) intel(0): 3D buffers tiled
[ 207.825] (**) intel(0): SwapBuffers wait enabled
[ 207.828] (==) intel(0): VideoRam: 131072 KB
[ 207.828] (WW) intel(0): xf86AllocateGARTMemory: allocation of 10 pages
failed
(Cannot allocate memory)
[ 207.829] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096,
tiled
[ 207.829] (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[ 207.829] (II) UXA(0): Driver registered support for the following
operations:
[ 207.829] (II) solid
[ 207.829] (II) copy
[ 207.829] (II) composite (RENDER acceleration)
[ 207.829] (II) put_image
[ 207.829] (II) get_image
[ 207.829] (==) intel(0): Backing store disabled
[ 207.829] (==) intel(0): Silken mouse disabled
[ 207.829] (II) intel(0): Initializing HW Cursor
[ 208.255] (II) intel(0): xf86BindGARTMemory: bind key 10 at 0x07ff5000
(pgoffset 32757)
[ 208.255] (II) intel(0): xf86BindGARTMemory: bind key 11 at 0x07ff6000
(pgoffset 32758)
[ 208.255] (II) intel(0): xf86BindGARTMemory: bind key 12 at 0x07ffa000
(pgoffset 32762)
[ 208.255] (II) intel(0): xf86BindGARTMemory: bind key 13 at 0x07ffb000
(pgoffset 32763)
[ 208.255] (II) intel(0): xf86BindGARTMemory: bind key 14 at 0x07fff000
(pgoffset 32767)
[ 208.255] (II) intel(0): Fixed memory allocation layout:
[ 208.255] (II) intel(0): 0x007df000: end of stolen memory
[ 208.255] (II) intel(0): 0x007df000-0x07ff4fff: DRI memory manager (122968
kB)
[ 208.256] (II) intel(0): 0x07ff5000-0x07ff5fff: Core cursor (4 kB,
0x000000003b4c0000 physical
)
[ 208.256] (II) intel(0): 0x07ff6000-0x07ff9fff: ARGB cursor (16 kB,
0x000000003920c000 physical
)
[ 208.256] (II) intel(0): 0x07ffa000-0x07ffafff: Core cursor (4 kB,
0x000000003ab99000 physical
)
[ 208.256] (II) intel(0): 0x07ffb000-0x07ffefff: ARGB cursor (16 kB,
0x00000000394e2000 physical
)
[ 208.256] (II) intel(0): 0x07fff000-0x07ffffff: overlay registers (4 kB,
0x000000003b988000 physical
)
[ 208.256] (II) intel(0): 0x08000000: end of aperture
[ 208.256] (II) intel(0): BO memory allocation layout:
[ 208.256] (II) intel(0): 0x007df000: start of memory manager
[ 208.256] (II) intel(0): 0x07ff5000: end of memory manager
[ 208.499] is lvds
[ 208.499] (II) intel(0): using SSC reference clock of 66 MHz
[ 208.501] (WW) intel(0): Chosen PLL clock of 66.5 Mhz more than 2% away from
desired 65.0 Mhz
[ 208.501] (II) intel(0): Selecting standard 18 bit TMDS pixel format.
[ 208.939] (II) intel(0): Output configuration:
[ 208.939] (II) intel(0): Pipe A is off
[ 208.939] (II) intel(0): Display plane A is now disabled and connected to
pipe A.
[ 208.939] (WW) intel(0): Hardware claims pipe A is on while software
believes it is off
[ 208.939] (II) intel(0): Pipe B is on
[ 208.939] (II) intel(0): Display plane B is now enabled and connected to
pipe B.
[ 208.939] (II) intel(0): Output VGA is connected to pipe none
[ 208.939] (II) intel(0): Output LVDS is connected to pipe B
[ 208.939] (II) intel(0): RandR 1.2 enabled, ignore the following RandR
disabled message.
[ 208.939] (==) intel(0): DPMS enabled
[ 208.939] (==) intel(0): Intel XvMC decoder disabled
[ 208.939] (II) intel(0): Set up overlay video
[ 208.939] (II) intel(0): direct rendering: DRI2 Enabled
[ 208.939] (--) RandR disabled
[ 208.940] (II) Initializing built-in extension Generic Event Extension
[ 208.940] (II) Initializing built-in extension SHAPE
[ 208.940] (II) Initializing built-in extension MIT-SHM
[ 208.940] (II) Initializing built-in extension XInputExtension
[ 208.940] (II) Initializing built-in extension XTEST
[ 208.940] (II) Initializing built-in extension BIG-REQUESTS
[ 208.940] (II) Initializing built-in extension SYNC
[ 208.940] (II) Initializing built-in extension XKEYBOARD
[ 208.940] (II) Initializing built-in extension XC-MISC
[ 208.940] (II) Initializing built-in extension SECURITY
[ 208.940] (II) Initializing built-in extension XINERAMA
[ 208.940] (II) Initializing built-in extension XFIXES
[ 208.940] (II) Initializing built-in extension RENDER
[ 208.940] (II) Initializing built-in extension RANDR
[ 208.940] (II) Initializing built-in extension COMPOSITE
[ 208.940] (II) Initializing built-in extension DAMAGE
[ 208.979] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 208.979] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 208.979] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 208.979] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 208.980] (II) AIGLX: Loaded and initialized i915
[ 208.980] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 208.981] (II) intel(0): Setting screen physical size to 270 x 203
[ 209.228] (II) config/wscons: checking input device /dev/wskbd
[ 209.228] (II) wskbd: ignoring "user" layout
[ 209.228] (II) LoadModule: "kbd"
[ 209.229] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[ 209.230] (II) Module kbd: vendor="X.Org Foundation"
[ 209.230] compiled for 1.12.2, module version = 1.6.1
[ 209.230] Module class: X.Org XInput Driver
[ 209.230] ABI class: X.Org XInput driver, version 16.0
[ 209.230] (II) Using input driver 'kbd' for '/dev/wskbd'
[ 209.230] (**) /dev/wskbd: always reports core events
[ 209.230] (**) /dev/wskbd: always reports core events
[ 209.230] (**) Option "Protocol" "standard"
[ 209.230] (**) Option "XkbRules" "base"
[ 209.230] (**) Option "XkbModel" "pc105"
[ 209.230] (**) Option "XkbLayout" "us"
[ 209.230] (II) XINPUT: Adding extended input device "/dev/wskbd" (type:
KEYBOARD, id 6)
[ 209.683] (II) config/wscons: checking input device /dev/wsmouse0
[ 209.683] (II) LoadModule: "synaptics"
[ 209.684] (II) Loading /usr/X11R6/lib/modules/input/synaptics_drv.so
[ 209.685] (II) Module synaptics: vendor="X.Org Foundation"
[ 209.685] compiled for 1.12.2, module version = 1.6.2
[ 209.685] Module class: X.Org XInput Driver
[ 209.685] ABI class: X.Org XInput driver, version 16.0
[ 209.685] (II) Using input driver 'synaptics' for '/dev/wsmouse0'
[ 209.685] (**) /dev/wsmouse0: always reports core events
[ 209.685] (**) Option "Device" "/dev/wsmouse0"
[ 210.625] (--) synaptics: /dev/wsmouse0: x-axis range 1472 - 5472 resolution
88
[ 210.625] (--) synaptics: /dev/wsmouse0: y-axis range 1408 - 4448 resolution
110
[ 210.625] (**) /dev/wsmouse0: always reports core events
[ 210.625] (II) XINPUT: Adding extended input device "/dev/wsmouse0" (type:
TOUCHPAD, id 7)
[ 210.625] (**) synaptics: /dev/wsmouse0: (accel) MinSpeed is now constant
deceleration 2.5
[ 210.625] (**) synaptics: /dev/wsmouse0: MaxSpeed is now 1.75
[ 210.625] (**) synaptics: /dev/wsmouse0: AccelFactor is now 0.040
[ 210.625] (**) /dev/wsmouse0: (accel) keeping acceleration scheme 1
[ 210.625] (**) /dev/wsmouse0: (accel) acceleration profile 1
[ 210.625] (**) /dev/wsmouse0: (accel) acceleration factor: 2.000
[ 210.625] (**) /dev/wsmouse0: (accel) acceleration threshold: 4
[ 211.080] (II) config/wscons: checking input device /dev/wsmouse
[ 211.080] (II) LoadModule: "ws"
[ 211.081] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[ 211.081] (II) Module ws: vendor="X.Org Foundation"
[ 211.081] compiled for 1.12.2, module version = 1.3.0
[ 211.081] Module class: X.Org XInput Driver
[ 211.081] ABI class: X.Org XInput driver, version 16.0
[ 211.081] (II) Using input driver 'ws' for '/dev/wsmouse'
[ 211.081] (**) /dev/wsmouse: always reports core events
[ 211.081] (II) ws: /dev/wsmouse: debuglevel 0
[ 211.081] (**) Option "Device" "/dev/wsmouse"
[ 211.081] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[ 211.082] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[ 211.082] (**) ws: /dev/wsmouse: associated screen: 0
[ 211.082] (II) ws: /dev/wsmouse: minimum x position: 0
[ 211.082] (II) ws: /dev/wsmouse: maximum x position: 1023
[ 211.082] (II) ws: /dev/wsmouse: minimum y position: 0
[ 211.082] (II) ws: /dev/wsmouse: maximum y position: 767
[ 211.082] (==) ws: /dev/wsmouse: Buttons: 7
[ 211.082] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[ 211.082] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type:
MOUSE, id 8)
[ 211.082] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[ 211.082] (**) /dev/wsmouse: (accel) acceleration profile 0
[ 211.082] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[ 211.082] (**) /dev/wsmouse: (accel) acceleration threshold: 4
[ 213.991] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 214.842] (II) intel(0): xf86UnbindGARTMemory: unbind key 10
[ 214.842] (II) intel(0): xf86UnbindGARTMemory: unbind key 11
[ 214.842] (II) intel(0): xf86UnbindGARTMemory: unbind key 12
[ 214.842] (II) intel(0): xf86UnbindGARTMemory: unbind key 13
[ 214.842] (II) intel(0): xf86UnbindGARTMemory: unbind key 14
[ 271.931] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 272.544] (II) intel(0): xf86BindGARTMemory: bind key 10 at 0x07ff5000
(pgoffset 32757)
[ 272.544] (II) intel(0): xf86BindGARTMemory: bind key 11 at 0x07ff6000
(pgoffset 32758)
[ 272.544] (II) intel(0): xf86BindGARTMemory: bind key 12 at 0x07ffa000
(pgoffset 32762)
[ 272.544] (II) intel(0): xf86BindGARTMemory: bind key 13 at 0x07ffb000
(pgoffset 32763)
[ 272.544] (II) intel(0): xf86BindGARTMemory: bind key 14 at 0x07fff000
(pgoffset 32767)
[ 272.544] (II) intel(0): Fixed memory allocation layout:
[ 272.544] (II) intel(0): 0x007df000: end of stolen memory
[ 272.544] (II) intel(0): 0x007df000-0x07ff4fff: DRI memory manager (122968
kB)
[ 272.544] (II) intel(0): 0x07ff5000-0x07ff5fff: Core cursor (4 kB,
0x000000003b4c0000 physical
)
[ 272.544] (II) intel(0): 0x07ff6000-0x07ff9fff: ARGB cursor (16 kB,
0x000000003920c000 physical
)
[ 272.544] (II) intel(0): 0x07ffa000-0x07ffafff: Core cursor (4 kB,
0x000000003ab99000 physical
)
[ 272.544] (II) intel(0): 0x07ffb000-0x07ffefff: ARGB cursor (16 kB,
0x00000000394e2000 physical
)
[ 272.544] (II) intel(0): 0x07fff000-0x07ffffff: overlay registers (4 kB,
0x000000003b988000 physical
)
[ 272.544] (II) intel(0): 0x08000000: end of aperture
[ 272.544] (II) intel(0): BO memory allocation layout:
[ 272.544] (II) intel(0): 0x007df000: start of memory manager
[ 272.544] (II) intel(0): 0x07ff5000: end of memory manager
[ 272.780] is lvds
[ 272.780] (II) intel(0): using SSC reference clock of 66 MHz
[ 272.782] (WW) intel(0): Chosen PLL clock of 66.5 Mhz more than 2% away from
desired 65.0 Mhz
[ 272.782] (II) intel(0): Selecting standard 18 bit TMDS pixel format.
[ 273.220] (II) intel(0): Output configuration:
[ 273.220] (II) intel(0): Pipe A is off
[ 273.220] (II) intel(0): Display plane A is now disabled and connected to
pipe A.
[ 273.220] (WW) intel(0): Hardware claims pipe A is on while software
believes it is off
[ 273.220] (II) intel(0): Pipe B is on
[ 273.220] (II) intel(0): Display plane B is now enabled and connected to
pipe B.
[ 273.220] (II) intel(0): Output VGA is connected to pipe none
[ 273.220] (II) intel(0): Output LVDS is connected to pipe B
[ 273.260] is crt
[ 273.480] (II) intel(0): I2C bus "CRTDDC_A" initialized.
[ 273.481] (II) intel(0): I2C bus "CRTDDC_A" removed.
[ 274.416] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 275.273] (II) intel(0): xf86UnbindGARTMemory: unbind key 10
[ 275.273] (II) intel(0): xf86UnbindGARTMemory: unbind key 11
[ 275.273] (II) intel(0): xf86UnbindGARTMemory: unbind key 12
[ 275.273] (II) intel(0): xf86UnbindGARTMemory: unbind key 13
[ 275.273] (II) intel(0): xf86UnbindGARTMemory: unbind key 14
[ 308.272] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 308.884] (II) intel(0): xf86BindGARTMemory: bind key 10 at 0x07ff5000
(pgoffset 32757)
[ 308.885] (II) intel(0): xf86BindGARTMemory: bind key 11 at 0x07ff6000
(pgoffset 32758)
[ 308.885] (II) intel(0): xf86BindGARTMemory: bind key 12 at 0x07ffa000
(pgoffset 32762)
[ 308.885] (II) intel(0): xf86BindGARTMemory: bind key 13 at 0x07ffb000
(pgoffset 32763)
[ 308.885] (II) intel(0): xf86BindGARTMemory: bind key 14 at 0x07fff000
(pgoffset 32767)
[ 308.885] (II) intel(0): Fixed memory allocation layout:
[ 308.885] (II) intel(0): 0x007df000: end of stolen memory
[ 308.885] (II) intel(0): 0x007df000-0x07ff4fff: DRI memory manager (122968
kB)
[ 308.885] (II) intel(0): 0x07ff5000-0x07ff5fff: Core cursor (4 kB,
0x000000003b4c0000 physical
)
[ 308.885] (II) intel(0): 0x07ff6000-0x07ff9fff: ARGB cursor (16 kB,
0x000000003920c000 physical
)
[ 308.885] (II) intel(0): 0x07ffa000-0x07ffafff: Core cursor (4 kB,
0x000000003ab99000 physical
)
[ 308.885] (II) intel(0): 0x07ffb000-0x07ffefff: ARGB cursor (16 kB,
0x00000000394e2000 physical
)
[ 308.885] (II) intel(0): 0x07fff000-0x07ffffff: overlay registers (4 kB,
0x000000003b988000 physical
)
[ 308.885] (II) intel(0): 0x08000000: end of aperture
[ 308.885] (II) intel(0): BO memory allocation layout:
[ 308.885] (II) intel(0): 0x007df000: start of memory manager
[ 308.885] (II) intel(0): 0x07ff5000: end of memory manager
[ 309.120] is lvds
[ 309.120] (II) intel(0): using SSC reference clock of 66 MHz
[ 309.122] (WW) intel(0): Chosen PLL clock of 66.5 Mhz more than 2% away from
desired 65.0 Mhz
[ 309.122] (II) intel(0): Selecting standard 18 bit TMDS pixel format.
[ 309.560] (II) intel(0): Output configuration:
[ 309.560] (II) intel(0): Pipe A is off
[ 309.560] (II) intel(0): Display plane A is now disabled and connected to
pipe A.
[ 309.560] (WW) intel(0): Hardware claims pipe A is on while software
believes it is off
[ 309.560] (II) intel(0): Pipe B is on
[ 309.560] (II) intel(0): Display plane B is now enabled and connected to
pipe B.
[ 309.560] (II) intel(0): Output VGA is connected to pipe none
[ 309.560] (II) intel(0): Output LVDS is connected to pipe B
[ 309.600] is crt
[ 309.820] (II) intel(0): I2C bus "CRTDDC_A" initialized.
[ 309.821] (II) intel(0): I2C bus "CRTDDC_A" removed.
[ 312.504] (II) UnloadModule: "kbd"
[ 312.505] (II) UnloadModule: "synaptics"
[ 312.540] (II) UnloadModule: "ws"
[ 313.607] (II) intel(0): xf86UnbindGARTMemory: unbind key 10
[ 313.607] (II) intel(0): xf86UnbindGARTMemory: unbind key 11
[ 313.607] (II) intel(0): xf86UnbindGARTMemory: unbind key 12
[ 313.607] (II) intel(0): xf86UnbindGARTMemory: unbind key 13
[ 313.607] (II) intel(0): xf86UnbindGARTMemory: unbind key 14
[ 313.636] (WW) intel(0): xf86DeAllocateGARTMemory: deallocation gart memory
with key 10 failed
(Bad address)
[ 313.636] (WW) intel(0): xf86DeAllocateGARTMemory: deallocation gart memory
with key 11 failed
(Bad address)
[ 313.636] (WW) intel(0): xf86DeAllocateGARTMemory: deallocation gart memory
with key 12 failed
(Bad address)
[ 313.636] (WW) intel(0): xf86DeAllocateGARTMemory: deallocation gart memory
with key 13 failed
(Bad address)
[ 313.636] (WW) intel(0): xf86DeAllocateGARTMemory: deallocation gart memory
with key 14 failed
(Bad address)
[ 313.641] Server terminated successfully (0). Closing log file.
startx-1.log:
-------------
xauth: (stdin):1: bad display name "mc.amt.ru:1" in "add" command
X.Org X Server 1.12.2
Release Date: 2012-05-29
X Protocol Version 11, Revision 0
Build Operating System: OpenBSD 5.2 i386
Current Operating System: OpenBSD mc.amt.ru 5.2 GENERIC#278 i386
Build Date: 22 July 2012 10:21:16PM
Current version of pixman: 0.24.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Sun Dec 2 19:58:06 2012
(==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d"
Segmentation fault at address 0x5100
Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.1.log" for additional
information.
Server terminated with error (1). Closing log file.
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error
xauth: (argv):1: bad display name "mc.amt.ru:1" in "remove" command
Xorg.1.log:
-----------
[ 278.678] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem
(Operation not permitted)
Check that you have set 'machdep.allowaperture=1'
in /etc/sysctl.conf and reboot your machine
refer to xf86(4) for details
[ 278.678] linear framebuffer access unavailable
[ 278.689] (--) Using wscons driver on /dev/ttyC3 in pcvt compatibility mode
(version 3.32)
[ 279.704]
X.Org X Server 1.12.2
Release Date: 2012-05-29
[ 279.704] X Protocol Version 11, Revision 0
[ 279.704] Build Operating System: OpenBSD 5.2 i386
[ 279.704] Current Operating System: OpenBSD mc.amt.ru 5.2 GENERIC#278 i386
[ 279.704] Build Date: 22 July 2012 10:21:16PM
[ 279.704]
[ 279.704] Current version of pixman: 0.24.4
[ 279.704] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 279.704] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 279.704] (==) Log file: "/var/log/Xorg.1.log", Time: Sun Dec 2 19:58:06
2012
[ 279.705] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d"
[ 279.705] (==) No Layout section. Using the first Screen section.
[ 279.705] (==) No screen section available. Using defaults.
[ 279.705] (**) |-->Screen "Default Screen Section" (0)
[ 279.705] (**) | |-->Monitor "<default monitor>"
[ 279.705] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 279.705] (==) Disabling SIGIO handlers for input devices
[ 279.705] (==) Automatically adding devices
[ 279.705] (==) Automatically enabling devices
[ 279.705] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[ 279.705] (==) ModulePath set to "/usr/X11R6/lib/modules"
[ 279.706] (II) The server relies on wscons to provide the list of input
devices.
If no devices become available, reconfigure wscons or disable
AutoAddDevices.
[ 279.706] (II) Loader magic: 0x3c021020
[ 279.706] (II) Module ABI versions:
[ 279.706] X.Org ANSI C Emulation: 0.4
[ 279.706] X.Org Video Driver: 12.0
[ 279.706] X.Org XInput driver : 16.0
[ 279.706] X.Org Server Extension : 6.0
[ 279.706] (--) PCI:*(0:0:2:0) 8086:3582:1014:0557 rev 2, Mem @
0xe0000000/134217728, 0xd0000000/524288, I/O @ 0x00001800/8
[ 279.706] (--) PCI: (0:0:2:1) 8086:3582:1014:0557 rev 2, Mem @
0xe8000000/134217728, 0xd0080000/524288
[ 279.706] (II) LoadModule: "extmod"
[ 279.707] (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
[ 279.707] (II) Module extmod: vendor="X.Org Foundation"
[ 279.707] compiled for 1.12.2, module version = 1.0.0
[ 279.707] Module class: X.Org Server Extension
[ 279.707] ABI class: X.Org Server Extension, version 6.0
[ 279.707] (II) Loading extension MIT-SCREEN-SAVER
[ 279.707] (II) Loading extension XFree86-VidModeExtension
[ 279.707] (II) Loading extension XFree86-DGA
[ 279.707] (II) Loading extension DPMS
[ 279.707] (II) Loading extension XVideo
[ 279.707] (II) Loading extension XVideo-MotionCompensation
[ 279.707] (II) Loading extension X-Resource
[ 279.707] (II) LoadModule: "dbe"
[ 279.708] (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
[ 279.708] (II) Module dbe: vendor="X.Org Foundation"
[ 279.708] compiled for 1.12.2, module version = 1.0.0
[ 279.708] Module class: X.Org Server Extension
[ 279.708] ABI class: X.Org Server Extension, version 6.0
[ 279.708] (II) Loading extension DOUBLE-BUFFER
[ 279.708] (II) LoadModule: "glx"
[ 279.709] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[ 279.709] (II) Module glx: vendor="X.Org Foundation"
[ 279.709] compiled for 1.12.2, module version = 1.0.0
[ 279.709] ABI class: X.Org Server Extension, version 6.0
[ 279.710] (==) AIGLX enabled
[ 279.710] (II) Loading extension GLX
[ 279.710] (II) LoadModule: "record"
[ 279.710] (II) Loading /usr/X11R6/lib/modules/extensions/librecord.so
[ 279.711] (II) Module record: vendor="X.Org Foundation"
[ 279.711] compiled for 1.12.2, module version = 1.13.0
[ 279.711] Module class: X.Org Server Extension
[ 279.711] ABI class: X.Org Server Extension, version 6.0
[ 279.711] (II) Loading extension RECORD
[ 279.711] (II) LoadModule: "dri"
[ 279.711] (II) Loading /usr/X11R6/lib/modules/extensions/libdri.so
[ 279.712] (II) Module dri: vendor="X.Org Foundation"
[ 279.712] compiled for 1.12.2, module version = 1.0.0
[ 279.712] ABI class: X.Org Server Extension, version 6.0
[ 279.712] (II) Loading extension XFree86-DRI
[ 279.712] (II) LoadModule: "dri2"
[ 279.713] (II) Loading /usr/X11R6/lib/modules/extensions/libdri2.so
[ 279.713] (II) Module dri2: vendor="X.Org Foundation"
[ 279.713] compiled for 1.12.2, module version = 1.2.0
[ 279.713] ABI class: X.Org Server Extension, version 6.0
[ 279.713] (II) Loading extension DRI2
[ 279.713] (==) Matched intel as autoconfigured driver 0
[ 279.713] (==) Matched vesa as autoconfigured driver 1
[ 279.713] (==) Assigned the driver to the xf86ConfigLayout
[ 279.713] (II) LoadModule: "intel"
[ 279.713] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
[ 279.715] (II) Module intel: vendor="X.Org Foundation"
[ 279.715] compiled for 1.12.2, module version = 2.12.0
[ 279.715] Module class: X.Org Video Driver
[ 279.715] ABI class: X.Org Video Driver, version 12.0
[ 279.715] (II) LoadModule: "vesa"
[ 279.716] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
[ 279.716] (II) Module vesa: vendor="X.Org Foundation"
[ 279.716] compiled for 1.12.2, module version = 2.3.1
[ 279.716] Module class: X.Org Video Driver
[ 279.716] ABI class: X.Org Video Driver, version 12.0
[ 279.716] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server
[ 279.716] (II) VESA: driver for VESA chipsets: vesa
[ 279.716] (WW) Falling back to old probe method for vesa
[ 279.716] (II) Loading sub module "vgahw"
[ 279.716] (II) LoadModule: "vgahw"
[ 279.718] (II) Loading /usr/X11R6/lib/modules/libvgahw.so
[ 279.718] (II) Module vgahw: vendor="X.Org Foundation"
[ 279.718] compiled for 1.12.2, module version = 0.1.0
[ 279.718] ABI class: X.Org Video Driver, version 12.0
[ 279.718] (II) Loading sub module "ramdac"
[ 279.718] (II) LoadModule: "ramdac"
[ 279.718] (II) Module "ramdac" already built-in
[ 279.718] drmOpenDevice: node name is /dev/drm0
[ 279.718] drmOpenDevice: open result is 9, (OK)
[ 279.718] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 279.718] drmOpenDevice: node name is /dev/drm0
[ 279.718] drmOpenDevice: open result is 9, (OK)
[ 279.718] drmOpenByBusid: drmOpenMinor returns 9
[ 279.719] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 279.719] (EE) intel(0): [drm] failed to set drm interface version.
[ 279.719] (EE) intel(0): Failed to become DRM master.
[ 279.719] (II) intel(0): Creating default Display subsection in Screen
section
"Default Screen Section" for depth/fbbpp 24/32
[ 279.719] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 279.719] (==) intel(0): RGB weight 888
[ 279.719] (==) intel(0): Default visual is TrueColor
[ 279.719] (II) intel(0): Integrated Graphics Chipset: Intel(R) 852GM/855GM
[ 279.719] (--) intel(0): Chipset: "852GM/855GM"
[ 279.719] (--) intel(0): Linear framebuffer at 0xE0000000
[ 279.719] (--) intel(0): IO registers at addr 0xD0000000 size 524288
[ 279.719] (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
[ 279.719] (WW) intel(0): libpciaccess failed to read 64kB video BIOS:
Unknown error: -78
[ 279.719] (WW) intel(0): VBIOS initialization failed.
[ 279.719] (EE) intel(0): Unable to map mmio range. Bad file descriptor (9)
[ 279.719] (II) intel(0): 2 display pipes available.
[ 279.719] (II) Loading sub module "ddc"
[ 279.719] (II) LoadModule: "ddc"
[ 279.719] (II) Module "ddc" already built-in
[ 279.719] (II) Loading sub module "i2c"
[ 279.719] (II) LoadModule: "i2c"
[ 279.719] (II) Module "i2c" already built-in
[ 279.719] (II) intel(0): Output VGA has no monitor section
[ 279.720] Segmentation fault at address 0x5100
[ 279.720]
Fatal server error:
[ 279.720] Caught signal 11 (Segmentation fault). Server aborting
[ 279.720]
[ 279.720]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 279.720] Please also check the log file at "/var/log/Xorg.1.log" for
additional information.
[ 279.720]
[ 279.720] Server terminated with error (1). Closing log file.
