> ---------------------------------------- > From: MERIGHI Marcus <[email protected]> > Sent: Thu Dec 06 14:02:09 CET 2012 > To: <[email protected]> > Subject: floppy attached as sd with notebook bay, fdformat(1) > > > Hello people, > > I found a dell 'floppy drive module' (3.5") for my > > hw.vendor=Dell Inc. > hw.product=Latitude D630 > hw.serialno=6P8454J > > When inserted (before boot) it shows up as (full dmesg below): > > umass0 at uhub7 port 1 configuration 1 interface 0 "Sony USB Floppy > Drive" rev 1.10/6.01 addr 3 > umass0: using UFI over CBI with CCI > scsibus0 at umass0: 2 targets, initiator 0 > sd0 at scsibus0 targ 1 lun 0: <SONY, USB-FDU, 6.01> ATAPI 0/direct > removable > > After being puzzled I just tried an existing floppy, disklabel shows a > /dev/sd0i slice, mounting worked. > > But trying to make use of an unformatted floppy I failed: > > Did the usual ``fdisk -i sd0'', ``disklabel -E sd0'', created ``i'' > slice. After ``newfs_msdos /dev/rsd0i'' (which returned darn fast but > without obvious error output) the ``i'' slice vanished from disklabel. > Unsurprisingly mounting a non existing /dev/sd0i slice failed. > > fdformat(1) just says ``this is not a floppy''. > > This is not one of my top priorities, and I am writing this report from > memory (apart from dmesg :-). If needed I'll sure reboot with the module > attached, re-do the tests and provide full output of commands. > > What options do I have? What am I getting wrong? Clue bat welcome! > > Bye, Marcus > > OpenBSD 5.2-current (GENERIC.MP) #121: Mon Nov 19 11:44:32 MST 2012 > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 3210059776 (3061MB) > avail mem = 3102187520 (2958MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf68e0 (62 entries) > bios0: vendor Dell Inc. version "A18" date 12/06/2011 > bios0: Dell Inc. Latitude D630 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP HPET APIC ASF! MCFG TCPA SLIC SSDT > acpi0: wakeup devices PCI0(S5) PCIE(S4) USB1(S0) USB2(S0) USB3(S0) USB4(S0) > USB5(S0) EHC2(S0) EHCI(S0) AZAL(S3) RP01(S3) RP02(S4) RP03(S3) RP04(S3) > RP05(S3) RP06(S5) LID_(S3) PBTN(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz, 1995.35 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF > cpu0: 2MB 64b/line 8-way L2 cache > cpu0: apic clock running at 199MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz, 1995.00 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF > cpu1: 2MB 64b/line 8-way L2 cache > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > ioapic0: misconfigured as apic 0, remapped to apid 2 > acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 > acpiprt0 at acpi0: bus 3 (PCIE) > acpiprt1 at acpi0: bus -1 (AGP_) > acpiprt2 at acpi0: bus 11 (RP01) > acpiprt3 at acpi0: bus 12 (RP02) > acpiprt4 at acpi0: bus -1 (RP03) > acpiprt5 at acpi0: bus -1 (RP04) > acpiprt6 at acpi0: bus -1 (RP05) > acpiprt7 at acpi0: bus 9 (RP06) > acpiprt8 at acpi0: bus 0 (PCI0) > acpicpu0 at acpi0: C3, C2, C1, PSS > acpicpu1 at acpi0: C3, C2, C1, PSS > acpitz0 at acpi0: critical temperature is 99 degC > acpibtn0 at acpi0: LID_ > acpibtn1 at acpi0: PBTN > acpibtn2 at acpi0: SBTN > acpiac0 at acpi0: AC unit online > acpibat0 at acpi0: BAT0 model "DELL KP4331" serial 278 type LION oem "SMP" > acpibat1 at acpi0: BAT1 not present > acpidock0 at acpi0: GDCK not docked (0) > acpivideo0 at acpi0: VID_ > acpivideo1 at acpi0: VID_ > acpivideo2 at acpi0: VID2 > cpu0: Enhanced SpeedStep 1995 MHz: speeds: 2001, 2000, 1600, 1200, 800 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x0c > vga1 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x0c > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > intagp0 at vga1 > agp0 at intagp0: aperture at 0xe0000000, size 0x10000000 > inteldrm0 at vga1: apic 2 int 16 > drm0 at inteldrm0 > "Intel GM965 Video" rev 0x0c at pci0 dev 2 function 1 not configured > uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 20 > uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 21 > ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 22 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x02: msi > azalia0: codecs: Sigmatel STAC9205X > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x02: msi > pci1 at ppb0 bus 11 > ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x02: msi > pci2 at ppb1 bus 12 > wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: msi, > MoW2, address 00:1f:3c:cc:e5:3c > ppb2 at pci0 dev 28 function 5 "Intel 82801H PCIE" rev 0x02: msi > pci3 at ppb2 bus 9 > bge0 at pci3 dev 0 function 0 "Broadcom BCM5755M" rev 0x02, BCM5755 A2 > (0xa002): apic 2 int 17, address 00:21:70:d9:e5:ab > brgphy0 at bge0 phy 1: BCM5755 10/100/1000baseT PHY, rev. 0 > uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 20 > uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 21 > uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x02: apic 2 int 22 > ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 20 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf2 > pci4 at ppb3 bus 3 > cbb0 at pci4 dev 1 function 0 "O2 Micro OZ711EZ1 CardBus" rev 0x21: apic 2 > int 19 > "O2 Micro Firewire" rev 0x02 at pci4 dev 1 function 4 not configured > cardslot0 at cbb0 slot 0 flags 0 > cardbus0 at cardslot0: bus 4 device 0 cacheline 0x0, lattimer 0x20 > pcmcia0 at cardslot0 > pcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x02 > pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x02: DMA, channel > 0 configured to compatibility, channel 1 configured to compatibility > pciide0: channel 0 disabled (no drives) > pciide0: channel 1 ignored (disabled) > pciide1 at pci0 dev 31 function 2 "Intel 82801HBM SATA" rev 0x02: DMA, > channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide1: using apic 2 int 18 for native-PCI interrupt > wd0 at pciide1 channel 0 drive 0: <HITACHI HTS542516K9SA00> > wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors > wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6 > ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x02: SMI > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM > spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM > usb2 at uhci0: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci1: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci2: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb5 at uhci3: USB revision 1.0 > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb6 at uhci4: USB revision 1.0 > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pms0 mux 0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > mtrr: Pentium Pro MTRR support > ugen0 at uhub2 port 2 "Dell product 0x8140" rev 2.00/43.15 addr 2 > uhub7 at uhub6 port 1 "O2 Micro OZ776 Hub" rev 1.10/1.10 addr 2 > umass0 at uhub7 port 1 configuration 1 interface 0 "Sony USB Floppy Drive" > rev 1.10/6.01 addr 3 > umass0: using UFI over CBI with CCI > scsibus0 at umass0: 2 targets, initiator 0 > sd0 at scsibus0 targ 1 lun 0: <SONY, USB-FDU, 6.01> ATAPI 0/direct removable > ugen1 at uhub7 port 2 "O2 O2Micro CCID SC Reader" rev 1.10/1.10 addr 4 > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > scsibus2 at softraid0: 256 targets > root on wd0a (1c180c22e222ec49.a) swap on wd0b dump on wd0b > sd0(umass0:1:0): Check Condition (error 0x70) on opcode 0x1b > SENSE KEY: Not Ready > ASC/ASCQ: Medium Not Present > sd1 at scsibus2 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed > sd1: 131900MB, 512 bytes/sector, 270132465 sectors > softraid0: volume sd1 is roaming, it used to be sd0, updating metadata >
Hi, This should be a floppy issue or connector ... I have same machine & I used until june the floppy drive on it with success, for about 3 years. you can/have check(ed) with other floppies maybe...? Cordialement Francois Pussault 3701 - 8 rue Marcel Pagnol 31100 Toulouse France +33 6 17 230 820 +33 5 34 365 269 [email protected]
