HP nx9020, 5.2, i386.
Put d-link dwa-131 usb wifi dongle and it shows up
as rsu0. The content of hostname.rsu0 does not matter,
since I never got to wireless router. I.e.
inet 192.168.1.1 255.255.255.0 NONE nwid ssid wpakey password
The message after ifconfig is like this:
rsu0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr mac_address
priority: 4
groups: wlan egress
media: IEEE802.11 autoselect
status: no network
ieee80211: nwid ssid wpakey password wpaprotos wpa1,wpa2 wpaakms psk
wpaciphers tkip,ccmp wpagroupcipher tkip
inet 192.168.1.102 netmask 0xffffff00 broadcast 192.168.1.255
inet6 fe80::1e7e:e5ff:fe1f:a1f3%rsu0 prefixlen 64 scopeid 0x4
Firmware installed from openbsd site.
Whatever I do, remove pf, or else, I cannot connect to the router.
Manual ifconfig was the same, no network.
After some hdd problems, I reinstalled and now I get another
problem: boot hangs at:
preserving editor files
After a minute or so, it finishes the boot with this line:
starting network daemons; sendmail inetd sndiod.
There is a chance that it is fine, but next things in a raw
waits. I remove usb dongle and it boots further.
I am able to scan, so dongle works.
If dmesg needed, I'd provide it, but nothing useful sits there.
Best regards
Zoran
