Hi,
I installed OpenBSD 5.3 i386 on my HP nc6400 notebook. Now when booting
the system, the kernel prints
acpitz3: critical temperate exceeded (3290 C): shutting down.
This temperature (3290 C) is shown after starting a system that was
powered off for several hours. After finishing the installation the
reported temperature was about 4180 C.
The other BSDs also report wired temperates but not that high. Some
years ago Linux reported about 55 C for the CPU which seems to be
a more realistic value.
Attached is a dmesg from the bsd.rd as this kernel does not immediately
shutdown the system.
Is there a way to disable this immediate shutdown of the system?
And how can I help to get sane values reported?
Thanks.
Sven
OpenBSD 5.3 (RAMDISK_CD) #49: Tue Mar 12 18:50:37 MDT 2013
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Genuine Intel(R) CPU T2400 @ 1.83GHz ("GenuineIntel" 686-class) 1.83 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,MWAIT,VMX,EST,TM2,xTPR,PDCM,PERF
real mem = 3614830592 (3447MB)
avail mem = 3548024832 (3383MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/05/07, BIOS32 rev. 0 @ 0xf0000, SMBIOS
rev. 2.4 @ 0xf398f (23 entries)
bios0: vendor Hewlett-Packard version "68YCU Ver. F.0B" date 09/05/2007
bios0: Hewlett-Packard HP Compaq nc6400 (RA270AA#ABD)
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC HPET APIC MCFG TCPA SSDT SSDT SSDT SSDT SSDT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 166MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpiprt0 at acpi0: bus 2 (C098)
acpiprt1 at acpi0: bus 8 (C101)
acpiprt2 at acpi0: bus 16 (C111)
acpiprt3 at acpi0: bus 32 (C117)
acpiprt4 at acpi0: bus 0 (C002)
bios0: ROM list: 0xc0000/0x10000!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
"Intel 82801GB HD Audio" rev 0x01 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 1 int 16
pci1 at ppb0 bus 8
bge0 at pci1 dev 0 function 0 "Broadcom BCM5753M" rev 0x21, BCM5750 C1
(0x4201): apic 1 int 16, address 00:16:d4:0d:67:3e
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: apic 1 int 17
pci2 at ppb1 bus 16
wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: msi, MoW2,
address 00:13:02:51:b4:19
ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: apic 1 int 19
pci3 at ppb2 bus 32
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 1 int 20
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 1 int 22
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 1 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 1 int 19
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 1 int 20
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
pci4 at ppb3 bus 2
cbb0 at pci4 dev 6 function 0 "TI PCIXX12 CardBus" rev 0x00: apic 1 int 18
"TI PCIXX12 Multimedia Card Reader" rev 0x00 at pci4 dev 6 function 2 not
configured
"TI PCIXX12 Secure Data" rev 0x00 at pci4 dev 6 function 3 not configured
"TI PCIXX12 Smart Card" rev 0x00 at pci4 dev 6 function 4 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x10, lattimer 0x20
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA775 DVD/CDRW, 1.00> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x01: msi, AHCI 1.1
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, HTS541080G9SA00, MB4O> SCSI3 0/direct fixed
t10.ATA_HTS541080G9SA00_MPBDL0XKGUPHJM
sd0: 76319MB, 512 bytes/sector, 156301488 sectors
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
umass0 at uhub0 port 4 configuration 1 interface 0 "SMI Corporation USB DISK"
rev 2.00/11.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <USB, Flash Disk, 1100> SCSI0 0/direct removable
sd1: 967MB, 512 bytes/sector, 1980416 sectors
umass1 at uhub0 port 6 configuration 1 interface 0 "SDMMC MA8123 USB
MassStorage Device" rev 2.00/2.01 addr 3
umass1: using SCSI over Bulk-Only
scsibus3 at umass1: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <USB Mass, Storage Device, \\001 \\001> SCSI0
0/direct removable serial.14cd8123812320080329
sd2: 7580MB, 512 bytes/sector, 15523840 sectors
"Broadcom Corp HP Integrated Module" rev 2.00/1.00 addr 2 at uhub1 port 1 not
configured
"vendor 0x08ff Fingerprint Sensor" rev 1.10/6.21 addr 2 at uhub2 port 1 not
configured
softraid0 at root
scsibus4 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
