Quoting MERIGHI Marcus <mcmer-open...@tor.at>:
obsd...@postafiok.hu (obsd, cgi), 2013.10.02 (Wed) 21:50 (CEST):
Can someone please mention a working USB to Ethernet adapter for OpenBSD
5.3? (anybody has a working one and can share the name of it?)
It doesn't need to be Gbit big... just a 10/100 would be more then enough..
Digitus DN-10050-1 [1]
axe0 at uhub0 port 5 configuration 1 interface 0 "ASIX Electronics
AX88772A" rev 2.00/0.01 addr 2
axe0: AX88772, address 00:22:f7:XX:XX:XX
ukphy0 at axe0 phy 16: Generic IEEE 802.3u media interface, rev. 1: OUI
0x000ec6, model 0x0006
Running 36 days 24/7 without problems.
[1]
http://www.digitus.info/en/products/network/fast-ethernet-network/network-interface-cards/10100m-network-usb-adapter-dn-10050-1/
!DSPAM:524c7925178091721711741!
The following works here on an older version of OpenBSD --- it shows
as 1000baseT but of course, it is not as fast as the em0 interface.
axe0 at uhub0 port 1 configuration 1 interface 0 "ASIX Electronics
AX88178" rev 2.00/0.01 addr 2
axe0: AX88178, address 00:80:c8:ff:ff:a1
ukphy0 at axe0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x00a0bc, model 0x0001
ifconfig axe0
axe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:80:c8:ef:af:31
priority: 0
media: Ethernet autoselect (1000baseT full-duplex)
status: active
inet 192.168.0.5 netmask 0xffffff00 broadcast 192.168.0.255
inet6 fe80::280:c8ff:feef:af31%axe0 prefixlen 64 scopeid 0x5
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
---------------------------------------------
This message was sent using ForeTell-POST 4.9
