On Sat, Feb 22, 2014 at 04:47:25PM -0600, Chris Bennett wrote:
> I noticed error message on boot a while ago, but wasn't paying much
> attention until right now.
>
> I get:
> mixerctl outputs.master=200
> mixerctl: /dev/mixer: Device not configured
>
> home $ mixerctl
> mixerctl: /dev/mixer: Device not configured
>
> Sound wasn't a problem in the past.
>
> Using snap from today, but saw problem a good time ago, wish I had paid
> attention sooner.
>
OK, I did a power off reboot and problem went away.
But I have seen above errors on boot screen various times before.
I did a soft reboot for this snapshot.
BIOS said is a Crystal 4205 for sound.
Is this a problem with snapshots or is my old laptop having hardware
problems?
New dmesg after hard reboot:
OpenBSD 5.5 (GENERIC) #255: Sat Feb 22 10:08:36 MST 2014
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz ("GenuineIntel" 686-class) 2
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,CNXT-ID,xTPR,PERF
real mem = 536252416 (511MB)
avail mem = 515186688 (491MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 01/12/04, BIOS32 rev. 0 @ 0xffe90, SMBIOS
rev. 2.3 @ 0xf76a0 (61 entries)
bios0: vendor Dell Computer Corporation version "A10" date 01/12/2004
bios0: Dell Computer Corporation Latitude C640
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP
acpi0: wakeup devices LID_(S3) PBTN(S4) PCI0(S3) UAR1(S3) USB0(S1) USB1(S1)
USB2(S1) MODM(S3) PCIE(S3) MPCI(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus 2 (PCIE)
acpiprt3 at acpi0: bus -1 (MPCI)
acpicpu0 at acpi0acpicpu0: struck PSS entry, core frequency equals last
acpicpu0: struck PSS entry, core frequency equals last
acpicpu0: invalid _PSS length
: C2
acpipwrres0 at acpi0: PADA, resource for ADPT
acpitz0 at acpi0: critical temperature is 99 degC
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "LIP8120DLP" serial 22542 type LION oem "Sony
Corp."
acpibat1 at acpi0: BAT1 not present
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PBTN
acpibtn2 at acpi0: SBTN
acpidock0 at acpi0: GDCK not docked (0)
acpivideo0 at acpi0: VID_
bios0: ROM list: 0xc0000/0xf000 0xcf000/0x800! 0xcf800/0x800!
cpu0 at mainbus0: (uniprocessor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x04
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xe8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x04
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 0 function 0 "ATI Radeon Mobility M7" rev 0x00
drm0 at radeondrm0
radeondrm0: irq 11
uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x02: irq 11
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x42
pci2 at ppb1 bus 2
xl0 at pci2 dev 0 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 11, address
00:0b:db:d5:c7:a2
exphy0 at xl0 phy 24: 3Com internal media interface
cbb0 at pci2 dev 1 function 0 "TI PCI1420 CardBus" rev 0x00: irq 11
cbb1 at pci2 dev 1 function 1 "TI PCI1420 CardBus" rev 0x00: irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 4 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 5 device 0 cacheline 0x8, lattimer 0x20
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHV2100AH>
wd0: 16-sector PIO, LBA, 95396MB, 195371568 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, RW/DVD GCC-4241N, A101> ATAPI 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
auich0 at pci0 dev 31 function 5 "Intel 82801CA/CAM AC97" rev 0x02: irq 11,
ICH3 AC97
ac97: codec id 0x4352595b (Cirrus Logic CS4205 rev 3)
ac97: codec features mic channel, tone, simulated stereo, bass boost, 20 bit
DAC, 18 bit ADC, SRS 3D
audio0 at auich0
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 5.9
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
ath0 at cardbus1 dev 0 function 0 "Atheros AR5212" rev 0x01: irq 11
ath0: AR5213 5.6 phy 4.1 rf2112a 4.6, FCC1A, address 00:0d:88:a5:15:0a
uhub1 at uhub0 port 1 "Genesys Logic USB2.0 Hub" rev 2.00/7.02 addr 2
uhub2 at uhub1 port 4 "Genesys Logic USB2.0 Hub" rev 2.00/7.02 addr 3
uhidev0 at uhub2 port 1 configuration 1 interface 0 "Logitech USB-PS/2 Optical
Mouse" rev 2.00/18.00 addr 4
uhidev0: iclass 3/1
ums0 at uhidev0: 6 buttons, Z dir
wsmouse2 at ums0 mux 0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (66fe4924404b6152.a) swap on wd0b dump on wd0b
drm: initializing kernel modesetting (RV200 0x1002:0x4C57 0x1028:0x012A).
radeondrm0: GTT: 64M 0xE8000000 - 0xEBFFFFFF
radeondrm0: VRAM: 128M 0x00000000E0000000 - 0x00000000E7FFFFFF (32M used)
ttm_pool_mm_shrink_init stub
drm: Panel ID String: 1024x768
drm: Panel Size 1024x768
drm: No TV DAC info found in BIOS
radeondrm0: 1024x768
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
> OpenBSD 5.5 (GENERIC) #255: Sat Feb 22 10:08:36 MST 2014
> [email protected]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz ("GenuineIntel" 686-class)
> 2 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,CNXT-ID,xTPR,PERF
> real mem = 536252416 (511MB)
> avail mem = 515186688 (491MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 01/12/04, BIOS32 rev. 0 @ 0xffe90,
> SMBIOS rev. 2.3 @ 0xf76a0 (61 entries)
> bios0: vendor Dell Computer Corporation version "A10" date 01/12/2004
> bios0: Dell Computer Corporation Latitude C640
> acpi0 at bios0: rev 0
> acpi0: sleep states S0 S1 S3 S4 S5
> acpi0: tables DSDT FACP
> acpi0: wakeup devices LID_(S3) PBTN(S4) PCI0(S3) UAR1(S3) USB0(S1) USB1(S1)
> USB2(S1) MODM(S3) PCIE(S3) MPCI(S3)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 1 (AGP_)
> acpiprt2 at acpi0: bus 2 (PCIE)
> acpiprt3 at acpi0: bus -1 (MPCI)
> acpicpu0 at acpi0acpicpu0: struck PSS entry, core frequency equals last
> acpicpu0: struck PSS entry, core frequency equals last
> acpicpu0: invalid _PSS length
> : C2
> acpipwrres0 at acpi0: PADA, resource for ADPT
> acpitz0 at acpi0: critical temperature is 99 degC
> acpiac0 at acpi0: AC unit online
> acpibat0 at acpi0: BAT0 model "LIP8120DLP" serial 22542 type LION oem "Sony
> Corp."
> acpibat1 at acpi0: BAT1 not present
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: PBTN
> acpibtn2 at acpi0: SBTN
> acpidock0 at acpi0: GDCK not docked (0)
> acpivideo0 at acpi0: VID_
> bios0: ROM list: 0xc0000/0xf000 0xcf000/0x800! 0xcf800/0x800!
> cpu0 at mainbus0: (uniprocessor)
> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x04
> intelagp0 at pchb0
> agp0 at intelagp0: aperture at 0xe8000000, size 0x4000000
> ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x04
> pci1 at ppb0 bus 1
> radeondrm0 at pci1 dev 0 function 0 "ATI Radeon Mobility M7" rev 0x00
> drm0 at radeondrm0
> radeondrm0: irq 11
> uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x02: irq 11
> ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x42
> pci2 at ppb1 bus 2
> xl0 at pci2 dev 0 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 11,
> address 00:0b:db:d5:c7:a2
> exphy0 at xl0 phy 24: 3Com internal media interface
> cbb0 at pci2 dev 1 function 0 "TI PCI1420 CardBus" rev 0x00: irq 11
> cbb1 at pci2 dev 1 function 1 "TI PCI1420 CardBus" rev 0x00: irq 11
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 4 device 0 cacheline 0x8, lattimer 0x20
> pcmcia0 at cardslot0
> cardslot1 at cbb1 slot 1 flags 0
> cardbus1 at cardslot1: bus 5 device 0 cacheline 0x8, lattimer 0x20
> pcmcia1 at cardslot1
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x02
> pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x02: DMA, channel
> 0 configured to compatibility, channel 1 configured to compatibility
> wd0 at pciide0 channel 0 drive 0: <FUJITSU MHV2100AH>
> wd0: 16-sector PIO, LBA, 95396MB, 195371568 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, RW/DVD GCC-4241N, A101> ATAPI
> 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> wsmouse1 at pms0 mux 0
> pms0: Synaptics touchpad, firmware 5.9
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> ath0 at cardbus1 dev 0 function 0 "Atheros AR5212" rev 0x01: irq 11
> ath0: AR5213 5.6 phy 4.1 rf2112a 4.6, FCC1A, address 00:0d:88:a5:15:0a
> uhub1 at uhub0 port 1 "Genesys Logic USB2.0 Hub" rev 2.00/7.02 addr 2
> uhub2 at uhub1 port 4 "Genesys Logic USB2.0 Hub" rev 2.00/7.02 addr 3
> uhidev0 at uhub2 port 1 configuration 1 interface 0 "Logitech USB-PS/2
> Optical Mouse" rev 2.00/18.00 addr 4
> uhidev0: iclass 3/1
> ums0 at uhidev0: 6 buttons, Z dir
> wsmouse2 at ums0 mux 0
> vscsi0 at root
> scsibus1 at vscsi0: 256 targets
> softraid0 at root
> scsibus2 at softraid0: 256 targets
> root on wd0a (66fe4924404b6152.a) swap on wd0b dump on wd0b
> drm: initializing kernel modesetting (RV200 0x1002:0x4C57 0x1028:0x012A).
> radeondrm0: GTT: 64M 0xE8000000 - 0xEBFFFFFF
> radeondrm0: VRAM: 128M 0x00000000E0000000 - 0x00000000E7FFFFFF (32M used)
> ttm_pool_mm_shrink_init stub
> drm: Panel ID String: 1024x768
> wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
>
> Chris Bennett
