A while back I posted a tech message dealing with a couple of buglets.
One got fixed pronto (that's why we test lots of snapshots) and the
other got attention from jsg@ and I tried all his suggestions but we
had no luck.
I nobody else has the prob then it's hard to justify wasting too much
time on it although I have seen some reports that linux has the same
prob on some graphics.
Here are the bug details and a somewhat old snapshot but there is no
functional difference in the latest one.
===
buglet 1:
When booting and the screen goes to its 34 line 85 column mode, the
text
mode fits into 30cm wide and 22cm high at the top left corner of a 38cm
wide 30cm high screen.
X runs full screen.
Neither happens on an Intel 945GTP running the same snapshot.
dmesg:
OpenBSD 5.5-beta (GENERIC.MP) #233: Fri Feb 7 12:14:13 MST 2014
t...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Atom(TM) CPU D525 @ 1.80GHz ("GenuineIntel" 686-class)
1.
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAI
T,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF,PERF
real mem = 2137223168 (2038MB)
avail mem = 2090381312 (1993MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/23/11, BIOS32 rev. 0 @
0xf0010, SMBIOS rev. 2.6 @ 0xfc8b0 (23 entries)
bios0: vendor American Megatrends Inc. version "080015" date 06/23/2011
bios0: Standard XS35
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG SLIC OEMB HPET GSCI
acpi0: wakeup devices P0P1(S4) AZAL(S3) P0P4(S4) P0P5(S4) JLAN(S3)
P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) USB0(S3) USB1(S3) USB2(S3) USB3(S3)
EUSB(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64, C-substates=0.1.0.0.0, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Atom(TM) CPU D525 @ 1.80GHz ("GenuineIntel" 686-class)
1.
GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAI
T,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF,PERF
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Atom(TM) CPU D525 @ 1.80GHz ("GenuineIntel" 686-class)
1.
GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAI
T,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF,PERF
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Atom(TM) CPU D525 @ 1.80GHz ("GenuineIntel" 686-class)
1.
GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAI
T,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF,PERF
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 3, remapped to apid 4
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (P0P1)
acpiprt2 at acpi0: bus 1 (P0P4)
acpiprt3 at acpi0: bus 2 (P0P5)
acpiprt4 at acpi0: bus -1 (P0P6)
acpiprt5 at acpi0: bus -1 (P0P7)
acpiprt6 at acpi0: bus -1 (P0P8)
acpiprt7 at acpi0: bus -1 (P0P9)
acpiec0 at acpi0
acpicpu0 at acpi0
acpicpu1 at acpi0
acpicpu2 at acpi0
acpicpu3 at acpi0
acpitz0 at acpi0: critical temperature is 104 degC
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: LCD_
bios0: ROM list: 0xc0000/0xda00! 0xce000/0x1800! 0xcf800/0x1000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
0:31:2: mem address conflict 0xfc00/0x400
pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x02
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1024x768
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel Pineview Video" rev 0x02 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02:
msi
azalia0: codecs: IDT 92HD81B1X
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4
int 16
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 4
int 17
pci2 at ppb1 bus 2
"JMicron SD/MMC" rev 0x80 at pci2 dev 0 function 0 not configured
sdhc0 at pci2 dev 0 function 2 "JMicron SD Host Controller" rev 0x80:
apic 4 int 18
sdmmc0 at sdhc0
"JMicron Memory Stick" rev 0x80 at pci2 dev 0 function 3 not configured
jme0 at pci2 dev 0 function 5 "JMicron JMC250" rev 0x03: msi, address
80:ee:73:28:4b:69
jmphy0 at jme0 phy 1: JMP211 10/100/1000 PHY, rev. 1
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4
int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4
int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4
int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4
int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4
int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci3 at ppb2 bus 3
pcib0 at pci0 dev 31 function 0 "Intel NM10 LPC" rev 0x02
pciide0 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 4 int 19 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <WDC WD3200BEVT-00A23T0>
wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CDDVDW SN-208AB, TC00> ATAPI
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic
4 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-12800 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
uhidev0 at uhub1 port 1 configuration 1 interface 0 "vendor 0x0b38
product 0x0010" rev 1.10/1.02 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1 "vendor 0x0b38
product 0x0010" rev 1.10/1.02 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
uhidev2 at uhub3 port 2 configuration 1 interface 0 "Holtek product
0x1400" rev 1.10/1.43 addr 2
uhidev2: iclass 3/1
ukbd1 at uhidev2: 8 variable keys, 6 key codes
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
uhidev3 at uhub3 port 2 configuration 1 interface 1 "Holtek product
0x1400" rev 1.10/1.43 addr 2
uhidev3: iclass 3/1, 3 report ids
ums0 at uhidev3 reportid 1: 5 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid2 at uhidev3 reportid 2: input=3, output=0, feature=0
uhid3 at uhidev3 reportid 3: input=1, output=0, feature=0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (7b898b60f8465533.a) swap on wd0b dump on wd0b
<EOF>
===
*** NOTE *** Please DO NOT CC me. I <am> subscribed to the list.
Mail to the sender address that does not originate at the list server is
tarpitted. The reply-to: address is provided for those who feel compelled to
reply off list. Thankyou.
Rod/
---
This life is not the real thing.
It is not even in Beta.
If it was, then OpenBSD would already have a man page for it.
