Didn't do the edit properly. Fixed here. Sorry. On Wed, 05 Mar 2014 15:53:06 +1100, Rod Whitworth wrote:
>A while back I posted a tech message dealing with a couple of buglets. > > >One got fixed pronto (that's why we test lots of snapshots) and the >other got attention from jsg@ and I tried all his suggestions but we >had no luck. > >If nobody else has the prob then it's hard to justify wasting too much >time on it although I have seen some reports that linux has the same >prob on some graphics. > >Here are the bug details and a somewhat old snapshot but there is no >functional difference in the latest one. > >=== >buglet 1: >When booting and the screen goes to its 34 line 85 column mode, the >text >mode fits into 30cm wide and 22cm high at the top left corner of a 38cm >wide 30cm high screen. > >X runs full screen. > Both run the frame buffer and X run correctly on an Intel 945GTP running the same snapshot. > >dmesg: >OpenBSD 5.5-beta (GENERIC.MP) #233: Fri Feb 7 12:14:13 MST 2014 > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP >cpu0: Intel(R) Atom(TM) CPU D525 @ 1.80GHz ("GenuineIntel" 686-class) >1. >GHz >cpu0: >FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, > >CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAI > >T,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF,PERF >real mem = 2137223168 (2038MB) >avail mem = 2090381312 (1993MB) >mainbus0 at root >bios0 at mainbus0: AT/286+ BIOS, date 06/23/11, BIOS32 rev. 0 @ >0xf0010, SMBIOS rev. 2.6 @ 0xfc8b0 (23 entries) >bios0: vendor American Megatrends Inc. version "080015" date 06/23/2011 >bios0: Standard XS35 >acpi0 at bios0: rev 2 >acpi0: sleep states S0 S3 S4 S5 >acpi0: tables DSDT FACP APIC MCFG SLIC OEMB HPET GSCI >acpi0: wakeup devices P0P1(S4) AZAL(S3) P0P4(S4) P0P5(S4) JLAN(S3) >P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) USB0(S3) USB1(S3) USB2(S3) USB3(S3) >EUSB(S3) >acpitimer0 at acpi0: 3579545 Hz, 24 bits >acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat >cpu0 at mainbus0: apid 0 (boot processor) >mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges >cpu0: apic clock running at 199MHz >cpu0: mwait min=64, max=64, C-substates=0.1.0.0.0, IBE >cpu1 at mainbus0: apid 2 (application processor) >cpu1: Intel(R) Atom(TM) CPU D525 @ 1.80GHz ("GenuineIntel" 686-class) >1. >GHz >cpu1: >FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, > >CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAI > >T,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF,PERF >cpu2 at mainbus0: apid 1 (application processor) >cpu2: Intel(R) Atom(TM) CPU D525 @ 1.80GHz ("GenuineIntel" 686-class) >1. >GHz >cpu2: >FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, > >CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAI > >T,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF,PERF >cpu3 at mainbus0: apid 3 (application processor) >cpu3: Intel(R) Atom(TM) CPU D525 @ 1.80GHz ("GenuineIntel" 686-class) >1. >GHz >cpu3: >FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, > >CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAI > >T,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF,PERF >ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins >ioapic0: misconfigured as apic 3, remapped to apid 4 >acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 >acpihpet0 at acpi0: 14318179 Hz >acpiprt0 at acpi0: bus 0 (PCI0) >acpiprt1 at acpi0: bus 3 (P0P1) >acpiprt2 at acpi0: bus 1 (P0P4) >acpiprt3 at acpi0: bus 2 (P0P5) >acpiprt4 at acpi0: bus -1 (P0P6) >acpiprt5 at acpi0: bus -1 (P0P7) >acpiprt6 at acpi0: bus -1 (P0P8) >acpiprt7 at acpi0: bus -1 (P0P9) >acpiec0 at acpi0 >acpicpu0 at acpi0 >acpicpu1 at acpi0 >acpicpu2 at acpi0 >acpicpu3 at acpi0 >acpitz0 at acpi0: critical temperature is 104 degC >acpibtn0 at acpi0: SLPB >acpibtn1 at acpi0: PWRB >acpivideo0 at acpi0: GFX0 >acpivout0 at acpivideo0: LCD_ >bios0: ROM list: 0xc0000/0xda00! 0xce000/0x1800! 0xcf800/0x1000 >pci0 at mainbus0 bus 0: configuration mode 1 (bios) >0:31:2: mem address conflict 0xfc00/0x400 >pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x02 >vga1 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x02 >intagp0 at vga1 >agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 >inteldrm0 at vga1 >drm0 at inteldrm0 >inteldrm0: 1024x768 >wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) >wsdisplay0: screen 1-5 added (std, vt100 emulation) >"Intel Pineview Video" rev 0x02 at pci0 dev 2 function 1 not configured >azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: >msi >azalia0: codecs: IDT 92HD81B1X >audio0 at azalia0 >ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4 >int 16 >pci1 at ppb0 bus 1 >ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 4 >int 17 >pci2 at ppb1 bus 2 >"JMicron SD/MMC" rev 0x80 at pci2 dev 0 function 0 not configured >sdhc0 at pci2 dev 0 function 2 "JMicron SD Host Controller" rev 0x80: >apic 4 int 18 >sdmmc0 at sdhc0 >"JMicron Memory Stick" rev 0x80 at pci2 dev 0 function 3 not configured >jme0 at pci2 dev 0 function 5 "JMicron JMC250" rev 0x03: msi, address >80:ee:73:28:4b:69 >jmphy0 at jme0 phy 1: JMP211 10/100/1000 PHY, rev. 1 >uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4 >int 23 >uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 >int 19 >uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4 >int 18 >uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 >int 16 >ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 >int 23 >usb0 at ehci0: USB revision 2.0 >uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 >ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 >pci3 at ppb2 bus 3 >pcib0 at pci0 dev 31 function 0 "Intel NM10 LPC" rev 0x02 >pciide0 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x02: DMA, >channel 0 configured to native-PCI, channel 1 configured to native-PCI >pciide0: using apic 4 int 19 for native-PCI interrupt >wd0 at pciide0 channel 0 drive 0: <WDC WD3200BEVT-00A23T0> >wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors >wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 >atapiscsi0 at pciide0 channel 1 drive 0 >scsibus0 at atapiscsi0: 2 targets >cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CDDVDW SN-208AB, TC00> ATAPI >5/cdrom removable >cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5 >ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic >4 int 19 >iic0 at ichiic0 >spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-12800 SO-DIMM >usb1 at uhci0: USB revision 1.0 >uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >usb2 at uhci1: USB revision 1.0 >uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >usb3 at uhci2: USB revision 1.0 >uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >usb4 at uhci3: USB revision 1.0 >uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >isa0 at pcib0 >isadma0 at isa0 >pckbc0 at isa0 port 0x60/5 >pckbd0 at pckbc0 (kbd slot) >pckbc0: using irq 1 for kbd slot >wskbd0 at pckbd0: console keyboard, using wsdisplay0 >pcppi0 at isa0 port 0x61 >spkr0 at pcppi0 >npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 >uhidev0 at uhub1 port 1 configuration 1 interface 0 "vendor 0x0b38 >product 0x0010" rev 1.10/1.02 addr 2 >uhidev0: iclass 3/1 >ukbd0 at uhidev0: 8 variable keys, 6 key codes >wskbd1 at ukbd0 mux 1 >wskbd1: connecting to wsdisplay0 >uhidev1 at uhub1 port 1 configuration 1 interface 1 "vendor 0x0b38 >product 0x0010" rev 1.10/1.02 addr 2 >uhidev1: iclass 3/0, 2 report ids >uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0 >uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0 >uhidev2 at uhub3 port 2 configuration 1 interface 0 "Holtek product >0x1400" rev 1.10/1.43 addr 2 >uhidev2: iclass 3/1 >ukbd1 at uhidev2: 8 variable keys, 6 key codes >wskbd2 at ukbd1 mux 1 >wskbd2: connecting to wsdisplay0 >uhidev3 at uhub3 port 2 configuration 1 interface 1 "Holtek product >0x1400" rev 1.10/1.43 addr 2 >uhidev3: iclass 3/1, 3 report ids >ums0 at uhidev3 reportid 1: 5 buttons, Z dir >wsmouse0 at ums0 mux 0 >uhid2 at uhidev3 reportid 2: input=3, output=0, feature=0 >uhid3 at uhidev3 reportid 3: input=1, output=0, feature=0 >vscsi0 at root >scsibus1 at vscsi0: 256 targets >softraid0 at root >scsibus2 at softraid0: 256 targets >root on wd0a (7b898b60f8465533.a) swap on wd0b dump on wd0b ><EOF> >=== *** NOTE *** Please DO NOT CC me. I <am> subscribed to the list. Mail to the sender address that does not originate at the list server is tarpitted. The reply-to: address is provided for those who feel compelled to reply off list. Thankyou. Rod/ --- This life is not the real thing. It is not even in Beta. If it was, then OpenBSD would already have a man page for it.
