Hi Mark,
On Wed, Mar 05, 2014 at 12:06:06AM +0100, Mark Kettenis wrote:
> That's the intention. The idea is that if firmware is needed, but not
> present, radeondrm(4) will detach and vga(4) will attach.
> Unfortunately the codepaths are different for different hardware
> generations and not all of them have been properly tested.
I was thinking something like this was the problem, thanks for your
explanation.
> Can you send a dmesg from a boot *without* the firmware installed?
> You can simply pkg_delete the radeon-firmware package and add it back
> later, or just temporarily move /etc/firmware/radeon-* to a different
> location and move it back afterwards.
I'v attached the dmesg from a boot without firmware available. This
resulted in a blank screen, just as the first boot.
If you need me to test anything else, just let me know!
Thanks,
Frank
OpenBSD 5.5 (GENERIC.MP) #301: Thu Feb 27 09:42:27 MST 2014
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4275572736 (4077MB)
avail mem = 4153147392 (3960MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0100 (59 entries)
bios0: vendor Award Software International, Inc. version "F7" date 11/20/2009
bios0: Gigabyte Technology Co., Ltd. GA-MA790XT-UD4P
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT HPET MCFG TAMG APIC
acpi0: wakeup devices USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3)
USB6(S3) SBAZ(S4) P2P_(S5) PCE2(S4) PCE3(S4) PCE4(S4) PCE5(S4) PCE6(S4)
PCE7(S4) PCE8(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpihpet0 at acpi0: 14318180 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Phenom(tm) II X4 905e Processor, 2511.82 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache, 6MB 64b/line 48-way L3 cache
cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu0: AMD erratum 721 detected and fixed
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 200MHz
cpu0: mwait min=64, max=64, C-substates=0.0.0.0.0, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Phenom(tm) II X4 905e Processor, 2511.45 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache, 6MB 64b/line 48-way L3 cache
cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu1: AMD erratum 721 detected and fixed
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: AMD Phenom(tm) II X4 905e Processor, 2511.45 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache, 6MB 64b/line 48-way L3 cache
cpu2: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu2: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu2: AMD erratum 721 detected and fixed
cpu2: smt 0, core 3, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: AMD Phenom(tm) II X4 905e Processor, 2511.45 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
cpu3: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache, 6MB 64b/line 48-way L3 cache
cpu3: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu3: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu3: AMD erratum 721 detected and fixed
cpu3: smt 0, core 2, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (P2P_)
acpiprt2 at acpi0: bus 1 (PCE2)
acpiprt3 at acpi0: bus -1 (PCE3)
acpiprt4 at acpi0: bus -1 (PCE4)
acpiprt5 at acpi0: bus -1 (PCE5)
acpiprt6 at acpi0: bus -1 (PCE6)
acpiprt7 at acpi0: bus -1 (PCE7)
acpiprt8 at acpi0: bus -1 (PCE8)
acpiprt9 at acpi0: bus -1 (PCE9)
acpiprt10 at acpi0: bus 2 (PCEA)
acpiprt11 at acpi0: bus -1 (PCEB)
acpiprt12 at acpi0: bus -1 (PCEC)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpicpu2 at acpi0: PSS
acpicpu3 at acpi0: PSS
acpibtn0 at acpi0: PWRB
cpu0: 2511 MHz: speeds: 2500 1900 1400 800 MHz
pci0 at mainbus0 bus 0
0:0:0: mem address conflict 0xe0000000/0x20000000
pchb0 at pci0 dev 0 function 0 "ATI RD780 HT-PCIE" rev 0x00
ppb0 at pci0 dev 2 function 0 "ATI RD790 PCIE" rev 0x00
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 0 function 0 "ATI Radeon HD 6670" rev 0x00
drm0 at radeondrm0
radeondrm0: msi
azalia0 at pci1 dev 0 function 1 "ATI Radeon HD 6670 Audio" rev 0x00: msi
azalia0: no supported codecs
ppb1 at pci0 dev 10 function 0 "ATI RD790 PCIE" rev 0x00
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800),
msi, address 00:24:1d:1d:c6:34
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 2 int 22, AHCI
1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, SAMSUNG HD502HI, 1AG0> SCSI3 0/direct fixed
naa.50000f010051fc3d
sd0: 476938MB, 512 bytes/sector, 976771055 sectors
sd1 at scsibus0 targ 1 lun 0: <ATA, SAMSUNG HD502HI, 1AG0> SCSI3 0/direct fixed
naa.50024e9200b2a5f5
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
sd2 at scsibus0 targ 2 lun 0: <ATA, OCZ-VERTEX2, 1.24> SCSI3 0/direct fixed
naa.5e83a97f2abfdfd8
sd2: 57241MB, 512 bytes/sector, 117231408 sectors, thin
cd0 at scsibus0 targ 3 lun 0: <TSSTcorp, CDDVDW SH-S223B, SB00> ATAPI 5/cdrom
removable
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 16,
version 1.0, legacy support
ohci1 at pci0 dev 18 function 1 "ATI SB700 USB" rev 0x00: apic 2 int 16,
version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci2 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ohci3 at pci0 dev 19 function 1 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 19
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x3a: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600
spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600
pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x00: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic 2 int 16
azalia1: codecs: Realtek ALC885
audio0 at azalia1
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x00
ppb2 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
pci3 at ppb2 bus 3
"TI TSB43AB23 FireWire" rev 0x00 at pci3 dev 14 function 0 not configured
ohci4 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci2: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci3: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
it0 at isa0 port 0x2e/2: IT8720F rev 5, EC port 0x228
usb6 at ohci4: USB revision 1.0
uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1
uhidev0 at uhub2 port 3 configuration 1 interface 0 "Logitech USB Laser Mouse"
rev 2.00/31.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 8 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub4 port 3 configuration 1 interface 0 "Microsoft Comfort Curve
Keyboard 2000" rev 2.00/1.73 addr 2
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd0 at ukbd0: console keyboard
uhidev2 at uhub4 port 3 configuration 1 interface 1 "Microsoft Comfort Curve
Keyboard 2000" rev 2.00/1.73 addr 2
uhidev2: iclass 3/0, 1 report id
uhid0 at uhidev2 reportid 1: input=7, output=0, feature=0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
sd3 at scsibus2 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
sd3: 57239MB, 512 bytes/sector, 117225713 sectors
root on sd3a (eb92a9b468b2b0be.a) swap on sd3b dump on sd3b
drm: initializing kernel modesetting (TURKS 0x1002:0x6758 0x1462:0x2508).
radeondrm0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
radeondrm0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
drm: probing gen 2 caps for device 0x1002:0x5978 = 2/0
drm: enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
error: [drm:pid0:ni_init_microcode] *ERROR* ni_cp: Failed to load firmware
"radeon-turks_pfp"
error: [drm:pid0:evergreen_startup] *ERROR* Failed to load firmware!
error: [drm:pid0:evergreen_init] *ERROR* disabling GPU acceleration
error: [drm:pid0:radeon_bo_unpin] *ERROR* 0xfffffe812edfc2b0 unpin not necessary
error: [drm:pid0:radeon_bo_unpin] *ERROR* 0xfffffe812edfc2b0 unpin not necessary
error: [drm:pid0:evergreen_init] *ERROR* radeon: MC ucode required for NI+.
: Fatal error during GPU init
radeon_hwmon_fini stub
drm: radeon: finishing device.
Finalizing pool allocator
ttm_pool_mm_shrink_fini stub
drm: Zone kernel: Used memory at exit: 0 kiB
drm: radeon: ttm finalized
drm0 detached
radeondrm0 detached
vga1 at pci1 dev 0 function 0 "ATI Radeon HD 6670" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
