Hello list,
[dmesg attached below]
I recently purchased a Thinkpad X61 tablet (manufactured circa
2006) and have not been able to get the stylus to work with the
screen in OpenBSD. It worked fine with the Windows 7 install that
came with it, so I know the hardware itself is fine.
>From reading some old posts to misc@, I have used "config" to
change the address and IRQ of com0 to 0x200 and IRQ 5, which has
caused com0 to show up in the dmesg.
If I run "cu -l /dev/cua00" and write on the screen, I get output
while I am writing that abruptly stops when I move the stylus
away, so I think it's a matter of a driver issue between X11 and
the hardware.
Unfortunately, emails from the time-period suggest running the
linuxwacom driver, which doesn't compile due to Linuxisms in the
code. Even the older releases don't compile on a modern system.
Other posts have indicated that adding a "wacom" driver section to
xorg.conf will work. While there is a wacom(4) listed in
xorg.conf(5), it is not installed on OpenBSD. In fact,
"% cd /usr/xenocara; find . -iname "*wacom*" -print" returns
nothing at all, and indeed none of the examples posted have worked
or given any hint in Xorg.0.log that the tablet functionality is
detected at all.
Is there any way to get the tablet functionality to work on
OpenBSD? Is it simply a matter of a missing wacom(4) driver? Do
any of the later Thinkpad tablets (some of which I've read use USB
connections internally instead of serial connections) work any
better?
I would really love to be able to use a stylus to write directly
on the screen; writing complicated Japanese kanji with a mouse can
become somewhat tedious after a while, so any help is greatly
appreciated, even if it's only "There are no plans to support this
on OpenBSD" so that I can start looking into another option (a PDA
perhaps?).
Thank you.
--
Bryan
OpenBSD 5.5-current (GENERIC.MP) #43: Sat Apr 12 09:39:12 MDT 2014
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 Duo CPU L7500 @ 1.60GHz ("GenuineIntel" 686-class) 799
MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF,PERF
real mem = 3194179584 (3046MB)
avail mem = 3129528320 (2984MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/22/11, BIOS32 rev. 0 @ 0xfdc80, SMBIOS
rev. 2.4 @ 0xe0010 (63 entries)
bios0: vendor LENOVO version "7SET39WW (1.25 )" date 03/22/2011
bios0: LENOVO 7764CTO
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET SLIC BOOT ASF! SSDT SSDT
SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) DURT(S3) IGBE(S4) EXP0(S4) EXP1(S4)
EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB1(S3) USB2(S3) USB3(S3)
USB4(S3) EHC0(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU L7500 @ 1.60GHz ("GenuineIntel" 686-class)
1.60 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF,PERF
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus -1 (EXP2)
acpiprt5 at acpi0: bus -1 (EXP3)
acpiprt6 at acpi0: bus -1 (EXP4)
acpiprt7 at acpi0: bus 5 (PCI1)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpipwrres0 at acpi0: PUBS, resource for USB0, USB2, USB4, EHC0, EHC1
acpitz0 at acpi0: critical temperature is 127 degC
acpitz1 at acpi0: critical temperature is 99 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "42T4661" serial 1010 type LION oem "SANYO"
acpibat1 at acpi0: BAT1 not present
acpibat2 at acpi0: BAT2 not present
acpiac0 at acpi0: AC unit offline
acpithinkpad0 at acpi0
acpidock0 at acpi0: GDCK not docked (0)
bios0: ROM list: 0xc0000/0x10000! 0xd0000/0x1000 0xd1000/0x1000 0xe0000/0x10000!
cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1601, 1600, 1200, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x0c
vga1 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x0c
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1400x1050
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel GM965 Video" rev 0x0c at pci0 dev 2 function 1 not configured
em0 at pci0 dev 25 function 0 "Intel ICH8 IGP M AMT" rev 0x03: msi, address
00:1d:72:8c:4a:fb
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: apic 1 int 20
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: apic 1 int 21
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x03: apic 1 int 22
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03: msi
azalia0: codecs: Analog Devices AD1984, Conexant/0x2bfa, using Analog Devices
AD1984
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03: apic 1 int 20
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x03: apic 1 int 21
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel Wireless WiFi Link 4965" rev 0x61: msi,
MIMO 2T3R, MoW1, address 00:1d:e0:6d:84:a7
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: apic 1 int 16
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: apic 1 int 17
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: apic 1 int 19
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3
pci3 at ppb2 bus 5
cbb0 at pci3 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 int 16
"Ricoh 5C832 Firewire" rev 0x04 at pci3 dev 0 function 1 not configured
sdhc0 at pci3 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 1 int 18
sdmmc0 at sdhc0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 6 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801HEM LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801HBM AHCI" rev 0x03: msi, AHCI 1.1
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, INTEL SSDSC2BW24, DC32> SCSI3 0/direct
fixed naa.55cd2e404b8ff5e1
sd0: 228936MB, 512 bytes/sector, 468862128 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x03: apic 1 int 23
iic0 at ichiic0
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x200/8 irq 5: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
ugen0 at uhub2 port 1 "STMicroelectronics Biometric Coprocessor" rev 1.00/0.01
addr 2
uhidev0 at uhub4 port 2 configuration 1 interface 0 "Lenovo Lenovo Mini
Wireless Keyboard" rev 2.00/0.04 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub4 port 2 configuration 1 interface 1 "Lenovo Lenovo Mini
Wireless Keyboard" rev 2.00/0.04 addr 2
uhidev1: iclass 3/1, 5 report ids
ums0 at uhidev1 reportid 1: 5 buttons, Z dir
wsmouse1 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 4: input=0, output=0, feature=7
uhid3 at uhidev1 reportid 5: input=0, output=0, feature=7
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
sd1: 196092MB, 512 bytes/sector, 401597808 sectors
root on sd1a (ff21e228b6f2b91a.a) swap on sd1b dump on sd1b
iwn0: radio is disabled by hardware switch
uhub6 at uhub0 port 4 "Lenovo product 0x1000" rev 2.00/0.01 addr 2
acpidock0: docked
