On Tue, 25 Nov 2014 05:30:53 +0100 Antoine Jacoutot <ajacou...@bsdfrog.org> wrote:
> On Mon, Nov 24, 2014 at 10:04:59PM +0000, Bernte wrote: > > Hi - > > > > Since upgrading to 5.6, I am having problems to detect my Brother USB > > printer in CUPS. > > > > The problem is that the printer is not found by the 'usb' backend: > > Your cups package is not up to date. You need the one from 5.6 stable. > Bj Antoine. cups-1.7.4p0.tgz is in release, and cups-2.0.1.tgz is in snapshot. Is there something in between, that would be in the errata if there was one for snapshot like there's a http://www.openbsd.org/plus.html between 5.6 and 5.6+ ? I've tried 1.7.4p0 on both i386 and amd64 with results strikingly like those describe by Bernte. Hmmm. Do I build 2.0 from ports or up to the snap and take my chances on other things.... Or attempt to backup to 1.4 or 1.5? Thanks, Dhu > > > # /usr/local/libexec/cups/backend/usb > > DEBUG: Loading USB quirks from "/usr/local/share/cups/usb". > > DEBUG: Loaded 68 quirks. > > DEBUG: list_devices > > DEBUG: libusb_get_device_list=8 > > DEBUG: Failed to check whether 04f9:001a has the "usblp" kernel module > > attached > > > > The error looks suspicious, though I did not find anything useful about it > > googling the web (it seems to be an error caused by libusb). > > > > The printer does show up in usbdevs -vd: > > > > # usbdevs -vd > > Controller /dev/usb0: > > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), > > RDC(0x17f3), rev 1.00 > > uhub0 > > port 1 powered > > port 2 powered > > Controller /dev/usb1: > > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), > > RDC(0x17f3), rev 1.00 > > uhub1 > > port 1 powered > > port 2 powered > > Controller /dev/usb2: > > addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), > > RDC(0x17f3), rev 1.00 > > uhub2 > > port 1 powered > > port 2 addr 2: full speed, self powered, config 1, product 0x001a(0x001a), > > Brother Industries(0x04f9), rev 1.00 > > ugen0 > > Controller /dev/usb3: > > addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), > > RDC(0x17f3), rev 1.00 > > uhub3 > > port 1 powered > > port 2 addr 2: full speed, power 100 mA, config 1, Logitech BT > > Mini-Receiver(0x0b04), Logitech(0x046d), rev 49.00 > > uhub4 > > port 1 powered > > port 2 addr 3: full speed, power 98 mA, config 1, Logitech BT > > Mini-Receiver(0xc713), Logitech(0x046d), rev 49.00, iSerialNumber > > 001F203C2558 > > uhidev0 > > port 3 addr 4: full speed, power 98 mA, config 1, Logitech BT > > Mini-Receiver(0xc714), Logitech(0x046d), rev 49.00, iSerialNumber > > 001F203C2558 > > uhidev1 > > > > As explained in the pkg-readme, I have disabled the ulpt driver in the > > kernel, as well as changed the ownership of the devices: > > > > # ls -la /dev/usb2 /dev/ugen0.* > > > > crw-rw---- 1 _cups wheel 63, 0 Nov 21 19:35 /dev/ugen0.00 > > crw-rw---- 1 _cups wheel 63, 1 Nov 21 19:35 /dev/ugen0.01 > > crw-rw---- 1 _cups wheel 63, 2 Nov 21 19:35 /dev/ugen0.02 > > crw-rw---- 1 _cups wheel 63, 3 Nov 21 19:35 /dev/ugen0.03 > > crw-rw---- 1 _cups wheel 63, 4 Nov 21 19:35 /dev/ugen0.04 > > crw-rw---- 1 _cups wheel 63, 5 Nov 21 19:35 /dev/ugen0.05 > > crw-rw---- 1 _cups wheel 63, 6 Nov 21 19:35 /dev/ugen0.06 > > crw-rw---- 1 _cups wheel 63, 7 Nov 21 19:35 /dev/ugen0.07 > > crw-rw---- 1 _cups wheel 63, 8 Nov 21 19:35 /dev/ugen0.08 > > crw-rw---- 1 _cups wheel 63, 9 Nov 21 19:35 /dev/ugen0.09 > > crw-rw---- 1 _cups wheel 63, 10 Nov 21 19:35 /dev/ugen0.10 > > crw-rw---- 1 _cups wheel 63, 11 Nov 21 19:35 /dev/ugen0.11 > > crw-rw---- 1 _cups wheel 63, 12 Nov 21 19:35 /dev/ugen0.12 > > crw-rw---- 1 _cups wheel 63, 13 Nov 21 19:35 /dev/ugen0.13 > > crw-rw---- 1 _cups wheel 63, 14 Nov 21 19:35 /dev/ugen0.14 > > crw-rw---- 1 _cups wheel 63, 15 Nov 21 19:35 /dev/ugen0.15 > > crw-rw---- 1 _cups wheel 61, 2 Nov 21 19:35 /dev/usb2 > > > > Any hints on how to track down my problem would be welcome. > > > > Regards, > > Bernd > > > > dmesg: > > > > OpenBSD 5.6 (GENERIC) #2: Tue Oct 28 16:56:54 CET 2014 > > > > r...@stable-56-i386.mtier.org:/binpatchng/work-binpatch56-i386/src/sys/arch/i386/compile/GENERIC > > cpu0: Vortex86 SoC (586-class) 934 MHz > > cpu0: FPU,TSC,CX8,MMX > > real mem = 1039691776 (991MB) > > avail mem = 1010257920 (963MB) > > mpath0 at root > > scsibus0 at mpath0: 256 targets > > mainbus0 at root > > bios0 at mainbus0: AT/286+ BIOS, date 11/26/10, BIOS32 rev. 0 @ 0xf0010 > > apm0 at bios0: Power Management spec V1.2 > > pcibios0 at bios0: rev 3.0 @ 0xf0000/0x10000 > > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf2fe0/240 (13 entries) > > pcibios0: no compatible PCI ICU found: ICU vendor 0x17f3 product 0x6036 > > pcibios0: Warning, unable to fix up PCI interrupt routing > > pcibios0: PCI bus #0 is the last bus > > bios0: ROM list: 0xc0000/0x8000 > > cpu0 at mainbus0: (uniprocessor) > > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > > pchb0 at pci0 dev 0 function 0 vendor "RDC", unknown product 0x6022 rev 0x00 > > rl0 at pci0 dev 1 function 0 "Realtek 8139" rev 0x10: irq 11, address > > 44:4d:50:07:1b:19 > > rlphy0 at rl0 phy 0: RTL internal PHY > > rl1 at pci0 dev 2 function 0 "Realtek 8139" rev 0x10: irq 11, address > > 44:4d:50:07:1b:1a > > rlphy1 at rl1 phy 0: RTL internal PHY > > pcib0 at pci0 dev 7 function 0 vendor "RDC", unknown product 0x6036 rev 0x00 > > vte0 at pci0 dev 8 function 0 "RDC R6040 Ethernet" rev 0x00: irq 6, address > > 00:1b:eb:25:30:9e > > rdcphy0 at vte0 phy 1: R6040 10/100 PHY, rev. 1 > > ohci0 at pci0 dev 10 function 0 "RDC R6060 USB" rev 0x12: irq 7, version > > 1.0, legacy support > > ehci0 at pci0 dev 10 function 1 "RDC R6061 USB2" rev 0x03: irq 3 > > usb0 at ehci0: USB revision 2.0 > > uhub0 at usb0 "RDC EHCI root hub" rev 2.00/1.00 addr 1 > > ohci1 at pci0 dev 11 function 0 "RDC R6060 USB" rev 0x12: irq 5, version > > 1.0, legacy support > > ehci1 at pci0 dev 11 function 1 "RDC R6061 USB2" rev 0x03: irq 9 > > usb1 at ehci1: USB revision 2.0 > > uhub1 at usb1 "RDC EHCI root hub" rev 2.00/1.00 addr 1 > > pciide0 at pci0 dev 12 function 0 "RDC R1011 IDE" rev 0x01: DMA > > (unsupported), channel 0 configured to compatibility, channel 1 configured > > to compatibility > > pciide0: channel 0 ignored (not responding; disabled or no drives?) > > wd0 at pciide0 channel 1 drive 0: <SanDisk SDSSDXP120G> > > wd0: 1-sector PIO, LBA48, 114473MB, 234441648 sectors > > vga1 at pci0 dev 13 function 0 vendor "RDC", unknown product 0x2012 rev 0x00 > > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > > azalia0 at pci0 dev 14 function 0 "RDC R3010 HDA" rev 0x01: irq 10 > > azalia0: codecs: Realtek ALC262 > > audio0 at azalia0 > > isa0 at pcib0 > > isadma0 at isa0 > > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > > com0: probed fifo depth: 0 bytes > > pckbc0 at isa0 port 0x60/5 > > pckbd0 at pckbc0 (kbd slot) > > pckbc0: using irq 1 for kbd slot > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > pcppi0 at isa0 port 0x61 > > spkr0 at pcppi0 > > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > > usb2 at ohci0: USB revision 1.0 > > uhub2 at usb2 "RDC OHCI root hub" rev 1.00/1.00 addr 1 > > usb3 at ohci1: USB revision 1.0 > > uhub3 at usb3 "RDC OHCI root hub" rev 1.00/1.00 addr 1 > > ugen0 at uhub2 port 2 "Brother Industries product 0x001a" rev 1.00/1.00 addr > > 2 > > uhub4 at uhub3 port 2 "Logitech Logitech BT Mini-Receiver" rev 2.00/49.00 > > addr 2 > > uhidev0 at uhub4 port 2 configuration 1 interface 0 "Logitech Logitech BT > > Mini-Receiver" rev 2.00/49.00 addr 3 > > uhidev0: iclass 3/1 > > ukbd0 at uhidev0: 8 variable keys, 6 key codes > > wskbd1 at ukbd0 mux 1 > > wskbd1: connecting to wsdisplay0 > > uhidev1 at uhub4 port 3 configuration 1 interface 0 "Logitech Logitech BT > > Mini-Receiver" rev 2.00/49.00 addr 4 > > uhidev1: iclass 3/1, 18 report ids > > ums0 at uhidev1 reportid 2: 12 buttons, Z dir > > wsmouse0 at ums0 mux 0 > > uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0 > > uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0 > > ums1 at uhidev1 reportid 5: 8 buttons, Z dir > > wsmouse1 at ums1 mux 0 > > uhid2 at uhidev1 reportid 16: input=6, output=6, feature=0 > > uhid3 at uhidev1 reportid 17: input=19, output=19, feature=0 > > uhid4 at uhidev1 reportid 18: input=45, output=45, feature=0 > > vscsi0 at root > > scsibus1 at vscsi0: 256 targets > > softraid0 at root > > scsibus2 at softraid0: 256 targets > > root on wd0a (e9660b60d2e0a900.a) swap on wd0b dump on wd0b > > ugen0 detached > > ugen0 at uhub2 port 2 "Brother Industries product 0x001a" rev 1.00/1.00 addr > > 2 > > > > -- > Antoine > > -- Ne obliviscaris, vix ea nostra voco.
