Hello,
a MEDION S4222 UMTS (https://www.hot.at/images/medion_usb_stick.png) stick
port 2 addr 4: high speed, power 500 mA, config 1, Product(0x0002), MediaTek
Inc(0x0e8d), rev 3.00, iSerialNumber 683694200024400
attaches as CDROM
umass0 at uhub7 port 2 configuration 1 interface 0 "MediaTek Inc Product" rev
2.00/3.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 2 targets, initiator 0
cd0 at scsibus4 targ 1 lun 0: <MEDIATEK, FLASH DISK, 6225> SCSI0 5/cdrom
removable serial.0e8d0002694200024400
but the logic is missing to switch to modem mode.
I tried various combinations via sys/dev/usb/umsm.c but did not manage
to get ucom attached.
The manual of the stick claims that "Linux 2.6" (or newer) is supported
(if this is of any help).
Any ideas?
Thank you very much.
Best regards,
Ingo
dmesg
=====
OpenBSD 5.6-current (GENERIC.MP) #731: Tue Dec 23 12:12:38 MST 2014
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
real mem = 4200173568 (4005MB)
avail mem = 4084494336 (3895MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe3400 (39 entries)
bios0: vendor Intel Corp. version "MQ96510J.86A.1754.2008.1117.0002" date
11/17/2008
bios0: Intel Corporation DG965WH
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC WDDT MCFG ASF! HPET SSDT SSDT SSDT SSDT SSDT
acpi0: wakeup devices SLPB(S4) P32_(S4) UAR1(S4) UAR2(S4) ILAN(S4) PEGP(S4)
PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) PEX5(S4) UHC1(S3) UHC2(S3)
UHC3(S3) UHC4(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz, 2397.92 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF
cpu0: 4MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 266MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz, 2397.61 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF
cpu1: 4MB 64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-127
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 6 (P32_)
acpiprt2 at acpi0: bus 1 (PEX0)
acpiprt3 at acpi0: bus 2 (PEX1)
acpiprt4 at acpi0: bus 3 (PEX2)
acpiprt5 at acpi0: bus 4 (PEX3)
acpiprt6 at acpi0: bus 5 (PEX4)
acpiprt7 at acpi0: bus -1 (PEX5)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpibtn0 at acpi0: SLPB
cpu0: Enhanced SpeedStep 2397 MHz: speeds: 2394, 1596 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82G965 Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82G965 Video" rev 0x02
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1920x1080
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82G965 HECI" rev 0x02 at pci0 dev 3 function 0 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 16
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 21
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 18
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x02: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x02: msi
pci2 at ppb1 bus 2
pciide0 at pci2 dev 0 function 0 "Marvell 88SE6101 IDE" rev 0xb1: DMA
(unsupported), channel 0 configured to native-PCI, channel 1 configured to
native-PCI
pciide0: using apic 2 int 17 for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
ppb2 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x02: msi
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 3 "Intel 82801H PCIE" rev 0x02: msi
pci4 at ppb3 bus 4
ppb4 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x02: msi
pci5 at ppb4 bus 5
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 23
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 19
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x02: apic 2 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xf2
pci6 at ppb5 bus 6
rl0 at pci6 dev 0 function 0 "Realtek 8139" rev 0x10: apic 2 int 21, address
00:02:44:11:a2:bb
rlphy0 at rl0 phy 0: RTL internal PHY
pcib0 at pci0 dev 31 function 0 "Intel 82801HH LPC" rev 0x02
ahci0 at pci0 dev 31 function 2 "Intel 82801H AHCI" rev 0x02: msi, AHCI 1.1
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, HDS728080PLA380, PF2O> SCSI3 0/direct fixed
naa.5000cca30ec825ca
sd0: 78533MB, 512 bytes/sector, 160836480 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x02: apic 2 int 21
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem3 at iic0 addr 0x53: 1GB DDR2 SDRAM non-parity PC2-5300CL5
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uhub7 at uhub0 port 4 "VIA Labs, Inc. USB2.0 Hub" rev 2.10/90.80 addr 2
uhub8 at uhub7 port 3 "VIA Labs, Inc. USB2.0 Hub" rev 2.10/90.80 addr 3
uhidev0 at uhub5 port 1 configuration 1 interface 0 "Dell Dell USB Keyboard"
rev 1.10/2.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub5 port 2 configuration 1 interface 0 "Dell Dell USB Optical
Mouse" rev 2.00/43.01 addr 3
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uaudio0 at uhub6 port 1 configuration 1 interface 0 "Logitech Inc. Logitech USB
Headset H340" rev 2.00/1.13 addr 2
uaudio0: audio rev 1.00, 5 mixer controls
audio0 at uaudio0
uhidev2 at uhub6 port 1 configuration 1 interface 3 "Logitech Inc. Logitech USB
Headset H340" rev 2.00/1.13 addr 2
uhidev2: iclass 3/0, 9 report ids
uhid0 at uhidev2 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=2, output=1, feature=0
uhid2 at uhidev2 reportid 8: input=0, output=5, feature=0
uhid3 at uhidev2 reportid 9: input=2, output=0, feature=0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (61628b08b6b1e09c.a) swap on sd0b dump on sd0b
umass0 at uhub7 port 2 configuration 1 interface 0 "MediaTek Inc Product" rev
2.00/3.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 2 targets, initiator 0
cd0 at scsibus4 targ 1 lun 0: <MEDIATEK, FLASH DISK, 6225> SCSI0 5/cdrom
removable serial.0e8d0002694200024400
usbdevs -v
==========
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 addr 2: high speed, self powered, config 1, USB2.0 Hub(0x2811), VIA
Labs, Inc.(0x2109), rev 90.80
port 1 powered
port 2 addr 4: high speed, power 500 mA, config 1, Product(0x0002), MediaTek
Inc(0x0e8d), rev 3.00, iSerialNumber 683694200024400
port 3 addr 3: high speed, self powered, config 1, USB2.0 Hub(0x2811), VIA
Labs, Inc.(0x2109), rev 90.80
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 4 powered
Controller /dev/usb1:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 powered
port 6 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb4:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb5:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 addr 2: low speed, power 70 mA, config 1, Dell USB Keyboard(0x2003),
Dell(0x413c), rev 2.00
port 2 addr 3: low speed, power 100 mA, config 1, Dell USB Optical
Mouse(0x3012), Dell(0x413c), rev 43.01
Controller /dev/usb6:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 addr 2: full speed, power 120 mA, config 1, Logitech USB Headset
H340(0x0a38), Logitech Inc.(0x046d), rev 1.13
port 2 powered
