On Fri, Jan 02, 2015 at 12:26:53PM +0100, Ingo Feinerer wrote: > a MEDION S4222 UMTS (https://www.hot.at/images/medion_usb_stick.png) stick > > port 2 addr 4: high speed, power 500 mA, config 1, Product(0x0002), MediaTek > Inc(0x0e8d), rev 3.00, iSerialNumber 683694200024400 > > attaches as CDROM > > umass0 at uhub7 port 2 configuration 1 interface 0 "MediaTek Inc Product" rev > 2.00/3.00 addr 4 > umass0: using SCSI over Bulk-Only > scsibus4 at umass0: 2 targets, initiator 0 > cd0 at scsibus4 targ 1 lun 0: <MEDIATEK, FLASH DISK, 6225> SCSI0 5/cdrom > removable serial.0e8d0002694200024400 > > but the logic is missing to switch to modem mode. > > I tried various combinations via sys/dev/usb/umsm.c but did not manage > to get ucom attached.
I am now able to switch the device into "modem mode" with the diff below (the constants are derived from the http://www.draisberghof.de/usb_modeswitch/ data package for the device with vendor 0x0e8d and product 0x0002). After the switch several new devices attach: umsm0 at uhub7 port 2 configuration 1 interface 0 "MediaTek Inc Product" rev 2.00/3.00 addr 4 umsm0 detached umsm0 at uhub7 port 2 configuration 1 interface 0 "MediaTek Inc Product" rev 2.00/3.00 addr 4 umsm0: missing endpoint umsm1 at uhub7 port 2 configuration 1 interface 1 "MediaTek Inc. product 0x00a5" rev 2.00/3.00 addr 4 umsm1: missing endpoint umsm2 at uhub7 port 2 configuration 1 interface 2 "MediaTek Inc. product 0x00a5" rev 2.00/3.00 addr 4 ucom0 at umsm2 umsm3 at uhub7 port 2 configuration 1 interface 3 "MediaTek Inc. product 0x00a5" rev 2.00/3.00 addr 4 ucom1 at umsm3 umsm4 at uhub7 port 2 configuration 1 interface 4 "MediaTek Inc. product 0x00a5" rev 2.00/3.00 addr 4 ucom2 at umsm4 umsm5 at uhub7 port 2 configuration 1 interface 5 "MediaTek Inc. product 0x00a5" rev 2.00/3.00 addr 4 ucom3 at umsm5 umass0 at uhub7 port 2 configuration 1 interface 6 "MediaTek Inc. product 0x00a5" rev 2.00/3.00 addr 4 umass0: using SCSI over Bulk-Only scsibus4 at umass0: 2 targets, initiator 0 According to http://www.draisberghof.de/usb_modeswitch/bb/viewtopic.php?f=3&t=2006 interface 2 (= ucom0 at umsm2) should work as serial modem. However, I always have an input/output error: $ sudo cu -l cuaU0 cu: open("/dev/cuaU0"): Input/output error (the same for all cuaU[0-3]). Any ideas for further investigation? Best regards, Ingo Index: src/sys/dev/usb/umsm.c =================================================================== RCS file: /cvs/src/sys/dev/usb/umsm.c,v retrieving revision 1.100 diff -u -p -r1.100 umsm.c --- src/sys/dev/usb/umsm.c 12 Jul 2014 21:24:33 -0000 1.100 +++ src/sys/dev/usb/umsm.c 4 Jan 2015 08:22:51 -0000 @@ -109,8 +109,9 @@ struct umsm_type { #define DEV_UMASS5 0x0100 #define DEV_UMASS6 0x0200 #define DEV_UMASS7 0x0400 +#define DEV_UMASS8 0x1000 #define DEV_UMASS (DEV_UMASS1 | DEV_UMASS2 | DEV_UMASS3 | DEV_UMASS4 | \ - DEV_UMASS5 | DEV_UMASS6 | DEV_UMASS7) + DEV_UMASS5 | DEV_UMASS6 | DEV_UMASS7 | DEV_UMASS8) }; static const struct umsm_type umsm_devs[] = { @@ -154,6 +155,9 @@ static const struct umsm_type umsm_devs[ {{ USB_VENDOR_KYOCERA2, USB_PRODUCT_KYOCERA2_KPC650 }, 0}, + {{ USB_VENDOR_MEDIATEK, 0x0002 }, DEV_UMASS8}, + {{ USB_VENDOR_MEDIATEK, 0x00a5 }, 0}, + /* XXX Some qualcomm devices are missing */ {{ USB_VENDOR_QUALCOMM, USB_PRODUCT_QUALCOMM_MSM_DRIVER }, DEV_UMASS1}, {{ USB_VENDOR_QUALCOMM, USB_PRODUCT_QUALCOMM_MSM_DRIVER2 }, DEV_UMASS4}, @@ -703,6 +707,13 @@ umsm_umass_changemode(struct umsm_softc cbw.bCBWFlags = CBWFLAGS_IN; cbw.CBWCDB[0] = UMASS_SERVICE_ACTION_OUT; cbw.CBWCDB[1] = 0x03; + break; + case DEV_UMASS8: + USETDW(cbw.dCBWDataTransferLength, 0x0); + cbw.bCBWFlags = CBWFLAGS_OUT; + cbw.CBWCDB[0] = 0xf0; + cbw.CBWCDB[1] = 0x01; + cbw.CBWCDB[2] = 0x03; break; default: DPRINTF(("%s: unknown device type.\n", sc->sc_dev.dv_xname)); Index: src/sys/dev/usb/usbdevs =================================================================== RCS file: /cvs/src/sys/dev/usb/usbdevs,v retrieving revision 1.641 diff -u -p -r1.641 usbdevs --- src/sys/dev/usb/usbdevs 4 Dec 2014 10:41:42 -0000 1.641 +++ src/sys/dev/usb/usbdevs 4 Jan 2015 08:23:11 -0000 @@ -452,6 +452,7 @@ vendor CTC 0x0e5e CONWISE Technology vendor HAWKING 0x0e66 Hawking vendor FOSSIL 0x0e67 Fossil vendor GMATE 0x0e7e G.Mate +vendor MEDIATEK 0x0e8d MediaTek Inc. vendor OTI 0x0ea0 Ours Technology vendor PILOTECH 0x0eaf Pilotech vendor NOVATECH 0x0eb0 Nova Tech dmesg ===== OpenBSD 5.7-beta (GENERIC) #10: Sat Jan 3 11:48:47 CET 2015 [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC RTC BIOS diagnostic error 80<clock_battery> real mem = 4200173568 (4005MB) avail mem = 4084539392 (3895MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe3400 (39 entries) bios0: vendor Intel Corp. version "MQ96510J.86A.1754.2008.1117.0002" date 11/17/2008 bios0: Intel Corporation DG965WH acpi0 at bios0: rev 0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP APIC WDDT MCFG ASF! HPET SSDT SSDT SSDT SSDT SSDT acpi0: wakeup devices SLPB(S4) P32_(S4) UAR1(S4) UAR2(S4) ILAN(S4) PEGP(S4) PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) PEX5(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz, 2397.89 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF cpu0: 4MB 64b/line 16-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 266MHz cpu at mainbus0: not configured ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 2 acpimcfg0 at acpi0 addr 0xf0000000, bus 0-127 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 6 (P32_) acpiprt2 at acpi0: bus 1 (PEX0) acpiprt3 at acpi0: bus 2 (PEX1) acpiprt4 at acpi0: bus 3 (PEX2) acpiprt5 at acpi0: bus 4 (PEX3) acpiprt6 at acpi0: bus 5 (PEX4) acpiprt7 at acpi0: bus -1 (PEX5) acpicpu0 at acpi0: PSS acpibtn0 at acpi0: SLPB cpu0: Enhanced SpeedStep 2397 MHz: speeds: 2394, 1596 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel 82G965 Host" rev 0x02 vga1 at pci0 dev 2 function 0 "Intel 82G965 Video" rev 0x02 intagp0 at vga1 agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 inteldrm0 at vga1 drm0 at inteldrm0 inteldrm0: 1920x1080 wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) "Intel 82G965 HECI" rev 0x02 at pci0 dev 3 function 0 not configured uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 16 uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 21 ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 18 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x02: msi pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x02: msi pci2 at ppb1 bus 2 pciide0 at pci2 dev 0 function 0 "Marvell 88SE6101 IDE" rev 0xb1: DMA (unsupported), channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using apic 2 int 17 for native-PCI interrupt pciide0: channel 0 ignored (not responding; disabled or no drives?) pciide0: channel 1 ignored (not responding; disabled or no drives?) ppb2 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x02: msi pci3 at ppb2 bus 3 ppb3 at pci0 dev 28 function 3 "Intel 82801H PCIE" rev 0x02: msi pci4 at ppb3 bus 4 ppb4 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x02: msi pci5 at ppb4 bus 5 uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 23 uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 19 uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x02: apic 2 int 18 ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb5 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xf2 pci6 at ppb5 bus 6 rl0 at pci6 dev 0 function 0 "Realtek 8139" rev 0x10: apic 2 int 21, address 00:02:44:11:a2:bb rlphy0 at rl0 phy 0: RTL internal PHY pcib0 at pci0 dev 31 function 0 "Intel 82801HH LPC" rev 0x02 ahci0 at pci0 dev 31 function 2 "Intel 82801H AHCI" rev 0x02: msi, AHCI 1.1 scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: <ATA, HDS728080PLA380, PF2O> SCSI3 0/direct fixed naa.5000cca30ec825ca sd0: 78533MB, 512 bytes/sector, 160836480 sectors ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x02: apic 2 int 21 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5 spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5 spdmem3 at iic0 addr 0x53: 1GB DDR2 SDRAM non-parity PC2-5300CL5 usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 uhub7 at uhub0 port 4 "VIA Labs, Inc. USB2.0 Hub" rev 2.10/90.80 addr 2 umsm0 at uhub7 port 1 configuration 1 interface 0 "Option N.V. Globetrotter HSDPA Modem" rev 1.10/0.00 addr 3 uhub8 at uhub7 port 3 "VIA Labs, Inc. USB2.0 Hub" rev 2.10/90.80 addr 4 uhidev0 at uhub5 port 1 configuration 1 interface 0 "Dell Dell USB Keyboard" rev 1.10/2.00 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub5 port 2 configuration 1 interface 0 "Dell Dell USB Optical Mouse" rev 2.00/43.01 addr 3 uhidev1: iclass 3/1 ums0 at uhidev1: 3 buttons, Z dir wsmouse0 at ums0 mux 0 uaudio0 at uhub6 port 1 configuration 1 interface 0 "Logitech Inc. Logitech USB Headset H340" rev 2.00/1.13 addr 2 uaudio0: audio rev 1.00, 5 mixer controls audio0 at uaudio0 uhidev2 at uhub6 port 1 configuration 1 interface 3 "Logitech Inc. Logitech USB Headset H340" rev 2.00/1.13 addr 2 uhidev2: iclass 3/0, 9 report ids uhid0 at uhidev2 reportid 1: input=1, output=0, feature=0 uhid1 at uhidev2 reportid 2: input=2, output=1, feature=0 uhid2 at uhidev2 reportid 8: input=0, output=5, feature=0 uhid3 at uhidev2 reportid 9: input=2, output=0, feature=0 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets umsm0 detached root on sd0a (61628b08b6b1e09c.a) swap on sd0b dump on sd0b umsm0 at uhub7 port 1 configuration 1 interface 0 "Option N.V. Globetrotter HSDPA Modem" rev 1.10/0.00 addr 3 ucom0 at umsm0 umsm1 at uhub7 port 1 configuration 1 interface 1 "Option N.V. Globetrotter HSDPA Modem" rev 1.10/0.00 addr 3 ucom1 at umsm1 umsm2 at uhub7 port 1 configuration 1 interface 2 "Option N.V. Globetrotter HSDPA Modem" rev 1.10/0.00 addr 3 ucom2 at umsm2 syncing disks... done rebooting... OpenBSD 5.7-beta (GENERIC) #11: Sun Jan 4 08:45:54 CET 2015 [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC RTC BIOS diagnostic error 80<clock_battery> real mem = 4200173568 (4005MB) avail mem = 4084539392 (3895MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe3400 (39 entries) bios0: vendor Intel Corp. version "MQ96510J.86A.1754.2008.1117.0002" date 11/17/2008 bios0: Intel Corporation DG965WH acpi0 at bios0: rev 0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP APIC WDDT MCFG ASF! HPET SSDT SSDT SSDT SSDT SSDT acpi0: wakeup devices SLPB(S4) P32_(S4) UAR1(S4) UAR2(S4) ILAN(S4) PEGP(S4) PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) PEX5(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz, 2397.93 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF cpu0: 4MB 64b/line 16-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 266MHz cpu at mainbus0: not configured ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 2 acpimcfg0 at acpi0 addr 0xf0000000, bus 0-127 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 6 (P32_) acpiprt2 at acpi0: bus 1 (PEX0) acpiprt3 at acpi0: bus 2 (PEX1) acpiprt4 at acpi0: bus 3 (PEX2) acpiprt5 at acpi0: bus 4 (PEX3) acpiprt6 at acpi0: bus 5 (PEX4) acpiprt7 at acpi0: bus -1 (PEX5) acpicpu0 at acpi0: PSS acpibtn0 at acpi0: SLPB cpu0: Enhanced SpeedStep 2397 MHz: speeds: 2394, 1596 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel 82G965 Host" rev 0x02 vga1 at pci0 dev 2 function 0 "Intel 82G965 Video" rev 0x02 intagp0 at vga1 agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 inteldrm0 at vga1 drm0 at inteldrm0 inteldrm0: 1920x1080 wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) "Intel 82G965 HECI" rev 0x02 at pci0 dev 3 function 0 not configured uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 16 uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 21 ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 18 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x02: msi pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x02: msi pci2 at ppb1 bus 2 pciide0 at pci2 dev 0 function 0 "Marvell 88SE6101 IDE" rev 0xb1: DMA (unsupported), channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using apic 2 int 17 for native-PCI interrupt pciide0: channel 0 ignored (not responding; disabled or no drives?) pciide0: channel 1 ignored (not responding; disabled or no drives?) ppb2 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x02: msi pci3 at ppb2 bus 3 ppb3 at pci0 dev 28 function 3 "Intel 82801H PCIE" rev 0x02: msi pci4 at ppb3 bus 4 ppb4 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x02: msi pci5 at ppb4 bus 5 uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 23 uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 19 uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x02: apic 2 int 18 ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb5 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xf2 pci6 at ppb5 bus 6 rl0 at pci6 dev 0 function 0 "Realtek 8139" rev 0x10: apic 2 int 21, address 00:02:44:11:a2:bb rlphy0 at rl0 phy 0: RTL internal PHY pcib0 at pci0 dev 31 function 0 "Intel 82801HH LPC" rev 0x02 ahci0 at pci0 dev 31 function 2 "Intel 82801H AHCI" rev 0x02: msi, AHCI 1.1 scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: <ATA, HDS728080PLA380, PF2O> SCSI3 0/direct fixed naa.5000cca30ec825ca sd0: 78533MB, 512 bytes/sector, 160836480 sectors ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x02: apic 2 int 21 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5 spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5 spdmem3 at iic0 addr 0x53: 1GB DDR2 SDRAM non-parity PC2-5300CL5 usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 uhub7 at uhub0 port 4 "VIA Labs, Inc. USB2.0 Hub" rev 2.10/90.80 addr 2 uhub8 at uhub7 port 3 "VIA Labs, Inc. USB2.0 Hub" rev 2.10/90.80 addr 3 uhidev0 at uhub5 port 1 configuration 1 interface 0 "Dell Dell USB Keyboard" rev 1.10/2.00 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub5 port 2 configuration 1 interface 0 "Dell Dell USB Optical Mouse" rev 2.00/43.01 addr 3 uhidev1: iclass 3/1 ums0 at uhidev1: 3 buttons, Z dir wsmouse0 at ums0 mux 0 uaudio0 at uhub6 port 1 configuration 1 interface 0 "Logitech Inc. Logitech USB Headset H340" rev 2.00/1.13 addr 2 uaudio0: audio rev 1.00, 5 mixer controls audio0 at uaudio0 uhidev2 at uhub6 port 1 configuration 1 interface 3 "Logitech Inc. Logitech USB Headset H340" rev 2.00/1.13 addr 2 uhidev2: iclass 3/0, 9 report ids uhid0 at uhidev2 reportid 1: input=1, output=0, feature=0 uhid1 at uhidev2 reportid 2: input=2, output=1, feature=0 uhid2 at uhidev2 reportid 8: input=0, output=5, feature=0 uhid3 at uhidev2 reportid 9: input=2, output=0, feature=0 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets root on sd0a (61628b08b6b1e09c.a) swap on sd0b dump on sd0b umsm0 at uhub7 port 2 configuration 1 interface 0 "MediaTek Inc Product" rev 2.00/3.00 addr 4 umsm0 detached umsm0 at uhub7 port 2 configuration 1 interface 0 "MediaTek Inc Product" rev 2.00/3.00 addr 4 umsm0: missing endpoint umsm1 at uhub7 port 2 configuration 1 interface 1 "MediaTek Inc. product 0x00a5" rev 2.00/3.00 addr 4 umsm1: missing endpoint umsm2 at uhub7 port 2 configuration 1 interface 2 "MediaTek Inc. product 0x00a5" rev 2.00/3.00 addr 4 ucom0 at umsm2 umsm3 at uhub7 port 2 configuration 1 interface 3 "MediaTek Inc. product 0x00a5" rev 2.00/3.00 addr 4 ucom1 at umsm3 umsm4 at uhub7 port 2 configuration 1 interface 4 "MediaTek Inc. product 0x00a5" rev 2.00/3.00 addr 4 ucom2 at umsm4 umsm5 at uhub7 port 2 configuration 1 interface 5 "MediaTek Inc. product 0x00a5" rev 2.00/3.00 addr 4 ucom3 at umsm5 umass0 at uhub7 port 2 configuration 1 interface 6 "MediaTek Inc. product 0x00a5" rev 2.00/3.00 addr 4 umass0: using SCSI over Bulk-Only scsibus4 at umass0: 2 targets, initiator 0 usbdevs -v ========== Controller /dev/usb0: addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x8086), rev 1.00 port 1 powered port 2 powered port 3 powered port 4 addr 2: high speed, self powered, config 1, USB2.0 Hub(0x2811), VIA Labs, Inc.(0x2109), rev 90.80 port 1 powered port 2 addr 4: high speed, power 500 mA, config 1, product 0x00a5(0x00a5), MediaTek Inc.(0x0e8d), rev 3.00 port 3 addr 3: high speed, self powered, config 1, USB2.0 Hub(0x2811), VIA Labs, Inc.(0x2109), rev 90.80 port 1 powered port 2 powered port 3 powered port 4 powered port 4 powered Controller /dev/usb1: addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x8086), rev 1.00 port 1 powered port 2 powered port 3 powered port 4 powered port 5 powered port 6 powered Controller /dev/usb2: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00 port 1 powered port 2 powered Controller /dev/usb3: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00 port 1 powered port 2 powered Controller /dev/usb4: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00 port 1 powered port 2 powered Controller /dev/usb5: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00 port 1 addr 2: low speed, power 70 mA, config 1, Dell USB Keyboard(0x2003), Dell(0x413c), rev 2.00 port 2 addr 3: low speed, power 100 mA, config 1, Dell USB Optical Mouse(0x3012), Dell(0x413c), rev 43.01 Controller /dev/usb6: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00 port 1 addr 2: full speed, power 120 mA, config 1, Logitech USB Headset H340(0x0a38), Logitech Inc.(0x046d), rev 1.13 port 2 powered
