On Wed, Jan 14, 2015 at 19:35 +0000, Fred wrote: > On 01/14/15 13:13, Evgeny Zhavoronkov wrote: > >>On 01/14/15 12:37, Evgeny Zhavoronkov wrote: > >>>Hi, All! > >>> > >>>I get these errors when actively use usb wifi adapter > >>>Jan 14 16:08:57 t4 /bsd: 0x4f4e5155 > >>>Jan 14 16:08:57 t4 /bsd: usb_insert_transfer: xfer=0xfffffe821cb7c348 > >>>not busy 0x4f4e5155 > >>>Jan 14 16:08:57 t4 last message repeated 1006 times > >>>Jan 14 16:08:57 t4 /bsd: athn0: could not wakeup chip > >>>Jan 14 16:09:22 t4 /bsd: ehci_idone: ex=0xfffffe821cb7c348 is done! > >>>Jan 14 16:10:40 t4 /bsd: 0x4f4e5155 > >>>Jan 14 16:10:40 t4 /bsd: usb_insert_transfer: xfer=0xfffffe821cb7c348 > >>>not busy 0x4f4e5155 > >>>Jan 14 16:10:40 t4 last message repeated 1006 times > >>>Jan 14 16:10:40 t4 /bsd: athn0: could not wakeup chip > >>>Jan 14 16:11:04 t4 /bsd: 0x4f4e5155 > >>>Jan 14 16:11:04 t4 /bsd: usb_insert_transfer: xfer=0xfffffe821cb7c348 > >>>not busy 0x4f4e5155 > >>>Jan 14 16:11:04 t4 last message repeated 1006 times > >>>Jan 14 16:11:04 t4 /bsd: athn0: could not wakeup chip > >>>Jan 14 16:12:20 t4 /bsd: ehci_idone: ex=0xfffffe821cb7c348 is done! > >>>Jan 14 16:12:28 t4 /bsd: ehci_idone: ex=0xfffffe821cb7c348 is done! > >>>Jan 14 16:15:12 t4 /bsd: ehci_idone: ex=0xfffffe821cb7c348 is done! > >>>Jan 14 16:24:21 t4 last message repeated 7 times > >>>Jan 14 16:32:25 t4 last message repeated 4 times > >>> > >>> > >>>it errased my dmesg, so I can't provide it. > >>> > >>>[demime 1.01d removed an attachment of type application/pgp-signature] > >>> > >> > >>look in: /var/run/dmesg.boot > >>Fred > > > >Thanks, here it is: > > > >OpenBSD 5.6-stable (GENERIC.MP) #0: Sun Jan 11 20:07:24 MSK 2015 > > root@t4.local.:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > real mem = 8262713344 (7879MB) > > avail mem = 8033972224 (7661MB) > > mpath0 at root > > scsibus0 at mpath0: 256 targets > > mainbus0 at root > > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdcd21000 (62 entries) > > bios0: vendor LENOVO version "GJET61WW (2.11 )" date 10/02/2013 > > bios0: LENOVO 20AQ004TRT > > acpi0 at bios0: rev 2 > > acpi0: sleep states S0 S3 S4 S5 > > acpi0: tables DSDT FACP SLIC DBGP ECDT HPET APIC MCFG SSDT SSDT > > SSDT SSDT SSDT SSDT SSDT SSDT PCCT SSDT TCPA UEFI MSDM ASF! BATB > > FPDT UEFI SSDT DMAR > > acpi0: wakeup devices LID_(S4) IGBE(S4) EXP2(S4) XHCI(S3) EHC1(S3) > > HDEF(S4) > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > acpiec0 at acpi0 > > acpihpet0 at acpi0: 14318179 Hz > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz, 1995.65 MHz > > cpu0: > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM > > cpu0: 256KB 64b/line 8-way L2 cache > > cpu0: smt 0, core 0, package 0 > > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > > cpu0: apic clock running at 99MHz > > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE > > cpu1 at mainbus0: apid 1 (application processor) > > cpu1: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz, 1995.38 MHz > > cpu1: > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM > > cpu1: 256KB 64b/line 8-way L2 cache > > cpu1: smt 1, core 0, package 0 > > cpu2 at mainbus0: apid 2 (application processor) > > cpu2: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz, 1995.38 MHz > > cpu2: > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM > > cpu2: 256KB 64b/line 8-way L2 cache > > cpu2: smt 0, core 1, package 0 > > cpu3 at mainbus0: apid 3 (application processor) > > cpu3: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz, 1995.38 MHz > > cpu3: > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM > > cpu3: 256KB 64b/line 8-way L2 cache > > cpu3: smt 1, core 1, package 0 > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins > > acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpiprt1 at acpi0: bus -1 (PEG_) > > acpiprt2 at acpi0: bus 2 (EXP1) > > acpiprt3 at acpi0: bus 3 (EXP2) > > acpiprt4 at acpi0: bus -1 (EXP3) > > acpicpu0 at acpi0: C3, C1, PSS > > acpicpu1 at acpi0: C3, C1, PSS > > acpicpu2 at acpi0: C3, C1, PSS > > acpicpu3 at acpi0: C3, C1, PSS > > acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1 > > acpitz0 at acpi0: critical temperature is 200 degC > > acpibtn0 at acpi0: LID_ > > acpibat0 at acpi0: BAT0 model "45N1111" serial 399 type LiP oem > > "SONY" > > acpibat1 at acpi0: BAT1 model "45N1125" serial 18846 type LION oem > > "SANYO" > > acpiac0 at acpi0: AC unit online > > acpithinkpad0 at acpi0 > > cpu0: Enhanced SpeedStep 1995 MHz: speeds: 2101, 2100, 2000, 1900, > > 1800, 1700, 1600, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz > > pci0 at mainbus0 bus 0 > > pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x0b > > vga1 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x0b > > intagp at vga1 not configured > > inteldrm0 at vga1 > > drm0 at inteldrm0 > > drm: Memory usable by graphics device = 2048M > > error: [drm:pid0:i915_write32] *ERROR* Unknown unclaimed register > > before writing to 100000 > > error: [drm:pid0:intel_dp_set_link_train] *ERROR* Timed out > > waiting for DP idle patterns > > error: [drm:pid0:i915_write32] *ERROR* Unknown unclaimed register > > before writing to 64040 > > inteldrm0: 1600x900 > > wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) > > wsdisplay0: screen 1-5 added (std, vt100 emulation) > > azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev > > 0x0b: msi > > azalia0: No codecs found > > "Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not > > configured > > em0 at pci0 dev 25 function 0 "Intel I218-LM" rev 0x04: msi, > > address 28:d2:44:3b:95:6f > > azalia1 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev > > 0x04: msi > > azalia1: codecs: Realtek ALC292 > > audio0 at azalia1 > > ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xe4: msi > > pci1 at ppb0 bus 2 > > rtsx0 at pci1 dev 0 function 0 "Realtek RTS5227 Card Reader" rev > > 0x01: msi > > sdmmc0 at rtsx0 > > ppb1 at pci0 dev 28 function 1 "Intel 8 Series PCIE" rev 0xe4: msi > > pci2 at ppb1 bus 3 > > "Intel Dual Band Wireless AC 7260" rev 0x6b at pci2 dev 0 function > > 0 not configured > > ehci0 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: > > apic 2 int 23 > > usb0 at ehci0: USB revision 2.0 > > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > > pcib0 at pci0 dev 31 function 0 "Intel 8 Series LPC" rev 0x04 > > ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: > > msi, AHCI 1.3 > > scsibus1 at ahci0: 32 targets > > sd0 at scsibus1 targ 0 lun 0: <ATA, TOSHIBA THNSNH12, HTLA> SCSI3 > > 0/direct fixed naa.500080d91004d72c > > sd0: 122104MB, 512 bytes/sector, 250069680 sectors, thin > > ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: > > apic 2 int 18 > > iic0 at ichiic0 > > spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM > > isa0 at pcib0 > > isadma0 at isa0 > > pckbc0 at isa0 port 0x60/5 > > pckbd0 at pckbc0 (kbd slot) > > pckbc0: using irq 1 for kbd slot > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > pms0 at pckbc0 (aux slot) > > pckbc0: using irq 12 for aux slot > > wsmouse0 at pms0 mux 0 > > wsmouse1 at pms0 mux 0 > > pms0: Synaptics clickpad, firmware 8.1 > > pcppi0 at isa0 port 0x61 > > spkr0 at pcppi0 > > uhub1 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.04 addr > > 2 > > athn0 at uhub1 port 2 "ATHEROS USB2.0 WLAN" rev 2.00/1.08 addr 3 > > uhub2 at uhub1 port 3 "LENOVO Lenovo ThinkPad Dock" rev 2.00/50.30 > > addr 4 > > uhidev0 at uhub2 port 3 configuration 1 interface 0 "SIGMACHIP USB > > Keyboard" rev 1.10/1.10 addr 5 > > uhidev0: iclass 3/1 > > ukbd0 at uhidev0: 8 variable keys, 6 key codes > > wskbd1 at ukbd0 mux 1 > > wskbd1: connecting to wsdisplay0 > > uhidev1 at uhub2 port 3 configuration 1 interface 1 "SIGMACHIP USB > > Keyboard" rev 1.10/1.10 addr 5 > > uhidev1: iclass 3/0, 2 report ids > > uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0 > > uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0 > > uhub3 at uhub2 port 4 "Lenovo Lenovo ThinkPad Dock" rev 2.00/0.01 > > addr 6 > > uhidev2 at uhub3 port 1 configuration 1 interface 0 "Logitech USB > > Receiver" rev 2.00/24.00 addr 7 > > uhidev2: iclass 3/1 > > ukbd1 at uhidev2: 8 variable keys, 6 key codes > > wskbd2 at ukbd1 mux 1 > > wskbd2: connecting to wsdisplay0 > > uhidev3 at uhub3 port 1 configuration 1 interface 1 "Logitech USB > > Receiver" rev 2.00/24.00 addr 7 > > uhidev3: iclass 3/1, 8 report ids > > ums0 at uhidev3 reportid 2: 16 buttons, Z dir > > wsmouse2 at ums0 mux 0 > > uhid2 at uhidev3 reportid 3: input=4, output=0, feature=0 > > uhid3 at uhidev3 reportid 4: input=1, output=0, feature=0 > > uhid4 at uhidev3 reportid 8: input=1, output=0, feature=0 > > uhidev4 at uhub3 port 1 configuration 1 interface 2 "Logitech USB > > Receiver" rev 2.00/24.00 addr 7 > > uhidev4: iclass 3/0, 33 report ids > > uhid5 at uhidev4 reportid 16: input=6, output=6, feature=0 > > uhid6 at uhidev4 reportid 17: input=19, output=19, feature=0 > > uhid7 at uhidev4 reportid 32: input=14, output=14, feature=0 > > uhid8 at uhidev4 reportid 33: input=31, output=31, feature=0 > > urtwn0 at uhub3 port 2 "Realtek 802.11n WLAN Adapter" rev > > 2.00/2.00 addr 8 > > urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R, address d8:eb:97:14:98:57 > > ugen0 at uhub1 port 6 "Validity Sensors product 0x0017" rev > > 1.10/0.78 addr 9 > > ugen1 at uhub1 port 7 "Intel product 0x07dc" rev 2.00/0.01 addr 10 > > uvideo0 at uhub1 port 8 configuration 1 interface 0 "J30DA53LB > > Integrated Camera" rev 2.00/10.04 addr 11 > > video0 at uvideo0 > > vscsi0 at root > > scsibus2 at vscsi0: 256 targets > > softraid0 at root > > scsibus3 at softraid0: 256 targets > > root on sd0a (2226f153deb8d4a6.a) swap on sd0b dump on sd0b > > WARNING: / was not properly unmounted > > athn0: AR9271 rev 1 (1T1R), ROM rev 13, address b0:48:7a:88:d1:6e > > > > Apart from filling up your logs does the device work okay? > The output is from DIAGNOSTIC being defined (line 833 dev/usb/ehci.c). > The output from usbdevs -v might be useful for a developer.
When I have these repeted messages from ehci_idone (ehci.c) some devices work very slow and unstable. Often Wifi is going down. If I try to detach any USB device during these errors I get a kernel crash #usbdevs -v Controller /dev/usb0: addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x8086), rev 1.00 port 1 addr 2: high speed, self powered, config 1, Rate Matching Hub(0x8000), Intel(0x8087), rev 0.04 port 1 powered port 2 addr 3: high speed, power 500 mA, config 1, USB2.0 WLAN(0x9271), ATHEROS(0x0cf3), rev 1.08, iSerialNumber 12345 port 3 addr 4: high speed, self powered, config 1, Lenovo ThinkPad Dock(0x1010), LENOVO(0x17ef), rev 50.30 port 1 powered port 2 powered port 3 addr 5: low speed, power 98 mA, config 1, USB Keyboard(0x0026), SIGMACHIP(0x1c4f), rev 1.10 port 4 addr 6: high speed, self powered, config 1, Lenovo ThinkPad Dock(0x100f), Lenovo(0x17ef), rev 0.01, iSerialNumber Rev1.2 port 1 addr 7: full speed, power 98 mA, config 1, USB Receiver(0xc52b), Logitech(0x046d), rev 24.00 port 2 addr 8: high speed, power 500 mA, config 1, 802.11n WLAN Adapter(0x648b), Realtek(0x20f4), rev 2.00, iSerialNumber 00e04c000001 port 3 powered port 4 powered port 5 powered port 6 addr 9: full speed, power 100 mA, config 1, product 0x0017(0x0017), Validity Sensors(0x138a), rev 0.78, iSerialNumber cc53c55968c0 port 7 addr 10: full speed, self powered, config 1, product 0x07dc(0x07dc), Intel(0x8087), rev 0.01 port 8 addr 11: high speed, power 500 mA, config 1, Integrated Camera(0x7035), J30DA53LB(0x04ca), rev 10.04 port 2 powered port 3 powered [demime 1.01d removed an attachment of type application/pgp-signature]
