Stefan Sperling <[email protected]> writes:
> On Wed, Feb 25, 2015 at 09:08:56PM -0300, Henrique Lengler wrote:
>> On Tue, Feb 24, 2015 at 12:23:54PM +0100, Stefan Sperling wrote:
>> > On Tue, Feb 24, 2015 at 02:30:06PM +0400, Evgeny Zhavoronkov wrote:
>> > > Ok. So I tried -current and situation is the same.
>> > > I can reproduce the total crash (laptop reboot) by attach/detach athn usb
>> > > wifi or playing with usb devs somehow.
>>
>> Hi, I have an athn0 card and I have this problem.
>> If my internet drops, sometimes I can't reset the stuff, in dmesg,
>> I stay receiving a lot of ehci errors.
>> --
>> Regards
>>
>> Henrique Lengler
>
> Everyone, please upgrade to -current and test the diff mpi posted here:
> http://marc.info/?l=openbsd-tech&m=142491190521130&w=2
I have updated to the latest snapshot. Applied the patch (strange thing,
marc.info wouldn't open unless I was using tor). And recompiled the
kernel according the FAQ. I haven't seen any echi messages for now. But
after I do:
# ifconfig athn0 down
If I try:
# ifconfig athn0 up
or
# sh /etc/netstart athn0
It hangs without doing anything. After that, usbdevs also hangs. No
message is printed when this happens. After that point. No other usb
devices works. Attaching them prints nothing.
dmesg and usbdevs:
OpenBSD 5.7-beta (GENERIC.MP) #1: Fri Feb 27 09:19:15 VET 2015
root@openbsd:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Pentium(R) D CPU 3.00GHz ("GenuineIntel" 686-class) 2.93 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,EST,CNXT-ID,CX16,xTPR,PDCM,LAHF
real mem = 2146189312 (2046MB)
avail mem = 2098733056 (2001MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 09/05/06, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.4 @
0xfd060 (22 entries)
bios0: vendor American Megatrends Inc. version "P2.70" date 09/05/2006
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC OEMB
acpi0: wakeup devices P0P4(S4) MC97(S4) USB1(S4) USB2(S4) USB3(S4) USB4(S4)
EUSB(S4) PS2K(S4) PS2M(S4) UAR1(S4) GBEN(S4) SLPB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 194MHz
cpu0: mwait min=64, max=64
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) D CPU 3.00GHz ("GenuineIntel" 686-class) 2.93 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,EST,CNXT-ID,CX16,xTPR,PDCM,LAHF
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (P0P4)
acpicpu0 at acpi0
acpi0: SSDT checksum error: PSS
acpicpu1 at acpi0: PSS
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
bios0: ROM list: 0xc0000/0xee00
cpu0: Enhanced SpeedStep 2924 MHz: speeds: 3000, 3000, 3000, 3000, 3000, 3000,
3000, 3000, 3000, 2400 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82865G Host" rev 0x02
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xe0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0 "Intel 82865G AGP" rev 0x02
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x0222 rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic 2 int 16
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic 2 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: apic 2 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: apic 2 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xc2
pci2 at ppb1 bus 2
rl0 at pci2 dev 5 function 0 "Realtek 8139" rev 0x10: apic 2 int 22, address
00:13:8f:d6:2b:03
rlphy0 at rl0 phy 0: RTL internal PHY
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <Hitachi HCP725032GLAT80>
wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4167B, DL11> ATAPI 5/cdrom
removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: apic 2 int
17
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM non-parity PC2100CL2.5
spdmem1 at iic0 addr 0x52: 1GB DDR SDRAM non-parity PC2100CL2.5
auich0 at pci0 dev 31 function 5 "Intel 82801EB/ER AC97" rev 0x02: apic 2 int
17, ICH5 AC97
ac97: codec id 0x434d4983 (C-Media Electronics CMI9761A+)
audio0 at auich0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627EHF rev 0x63
lm1 at wbsio0 port 0x290/8: W83627EHF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
athn0 at uhub0 port 1 "ATHEROS USB2.0 WLAN" rev 2.00/1.08 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (f4d7783916c532dc.a) swap on wd0b dump on wd0b
athn0: AR9271 rev 1 (1T1R), ROM rev 13, address f8:d1:11:b4:9d:82
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 addr 2: high speed, power 500 mA, config 1, USB2.0 WLAN(0x9271),
ATHEROS(0x0cf3), rev 1.08, iSerialNumber 12345
port 2 powered
port 3 powered
port 4 powered
port 5 powered
port 6 powered
port 7 powered
port 8 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb4:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
