Hi there,
it seems the tip with the delay did the trick :)
thx
Markus
Am 20.02.2015 um 08:34 schrieb Markus Rosjat:
hi tuomas,
I tried both default to com0 and not but same result but I will
checkout the other settings maybe that does the trick :)
thx for the quick reply
regards
Markus
Am 20.02.2015 um 08:15 schrieb Tuomas Tonteri:
Hi Markus,
Just a quick reply - I've installed couple of those, but don't have
any at hand right now. Sounds like you should check the boot menu:
comBIOS Monitor. Press ? for help.
show
ConSpeed = 19200
ConLock = Enabled
ConMute = Disabled
BIOSentry = Enabled
PCIROMS = Enabled
PXEBoot = Disabled
FLASH = Primary
BootDelay = 20
FastBoot = Disabled
BootPartition = Disabled
BootDrive = 80 80 80 80
ShowPCI = Enabled
Reset = Hard
CpuSpeed = Default
Set the BootDrive to 80 80 80 80 to only boot from the internal first
disk. BootDelay helps too, so that the media has time to initialize
itself, otherwise the boot often fails (not very much fun when you
reboot it remotely and it hangs).
Also hope that you have set the default openbsd console to com0.
Using drive 0, partition 3.
Loading.....
probing: pc0 com0 pci mem[620K 1022M a20=on]
disk: hd0+
OpenBSD/i386 BOOT 3.21
switching console to com0
>> OpenBSD/i386 BOOT 3.21
boot>
booting hd0a:/bsd: 8404228+1102404 [52+381152+367486]=0x9c7d50
entry point at 0x200120
Br,
Tuomas.
--
Tuomas Tonteri
www.elfcon.net / www.elfcloud.fi
-----Alkuperäinen viesti-----
Lähettäjä: owner-m...@openbsd.org [mailto:owner-m...@openbsd.org]
Puolesta Markus Rosjat
Lähetetty: 20. helmikuutata 2015 9:06
Vastaanottaja: OpenBSD misc
Aihe: Soekris 6501-70 mSATA and OpenBSD
Hi there,
I have a new Soekris 6501-70 and a KingSpec 8gb mSATA drive. I can
install OpenBSD 5.5 over PXE but after reboot it keeps hanging at the
entry point msg. I actually did some research befor I ordered the
mSATA device because I know Soekris 6501 has some isuess with them
but KingSpec was one of the devices that seem to have no trouble with
booting up.
So simple question is there something I miss here that needs to be
done befor I reboot after a fresh install to get the Soekris up and
running?
Regards
--
Markus Rosjat fon: +49 351 8107223 mail: ros...@ghweb.de
G+H Webservice GbR Gorzolla, Herrmann
Königsbrücker Str. 70, 01099 Dresden
http://www.ghweb.de
fon: +49 351 8107220 fax: +49 351 8107227
Bitte prüfen Sie, ob diese Mail wirklich ausgedruckt werden muss! Before you
print it, think about your responsibility and commitment to the ENVIRONMENT
