hello,
i have hinted about this issue before, but it is
becoming something that quite bothers me, so i
thought i might ask for help.
i have a thinkpad x60s. after resuming from lidsuspend,
for no apparent reason the temperature keeps hanging
around 70-71. if i make a reboot, it will go back to 55.
not all resumings result in this higher temperature,
but once it happens, it seems to keep this "state"
after multiple lidsuspends, again, until reboot.
any ideas how to track this down?
no rogue interrupts, no high cpu usage...
2 users Load 1.25 1.16 1.14 (1-25 of 31) Tue Apr 14 22:32:59 2015
SENSOR VALUE STATUS DESCRIPTION
acpitz0.temp0 54.00 degC zone temperature
acpitz1.temp0 72.00 degC zone temperature
acpibtn0.indicator0 On lid open
acpibat0.volt0 14.40 V DC voltage
acpibat0.volt1 16.43 V DC current voltage
acpibat0.power0 0.00 W rate
acpibat0.watthour0 21.75 Wh last full
capacity
acpibat0.watthour1 1.09 Wh warning capacity
acpibat0.watthour2 0.20 Wh low capacity
acpibat0.watthour3 20.91 Wh OK remaining
capacity
acpibat0.watthour4 28.80 Wh design capacity
acpibat0.raw0 0 raw OK battery idle
acpiac0.indicator0 On power supply
acpithinkpad0.temp0 54.00 degC
acpithinkpad0.temp1 44.00 degC
acpithinkpad0.temp3 51.00 degC
acpithinkpad0.temp4 32.00 degC
acpithinkpad0.temp6 31.00 degC
acpithinkpad0.fan0 3090 RPM
acpidock0.indicator0 Off unknown not docked
cpu0.temp0 72.00 degC
aps0.temp0 44.00 degC
aps0.temp1 44.00 degC
aps0.indicator0 Off Keyboard Active
aps0.indicator1 Off Mouse Active
aps0.indicator2 On Lid Open
aps0.raw0 465 raw X_ACCEL
aps0.raw1 512 raw Y_ACCEL
aps0.raw2 465 raw X_VAR
aps0.raw3 512 raw Y_VAR
softraid0.drive0 online OK sd1
load averages: 1.51, 1.27, 1.18
61 processes: 1 running, 58 idle, 2 on processor
CPU0 states: 0.0% user, 0.0% nice, 0.2% system, 0.0% interrupt, 99.8% idle
CPU1 states: 3.8% user, 0.0% nice, 2.2% system, 0.0% interrupt, 94.0% idle
Memory: Real: 341M/865M act/tot Free: 1129M Cache: 365M Swap: 0K/2252M
PID USERNAME PRI NICE SIZE RES STATE WAIT TIME CPU COMMAND
29231 _x11 2 0 15M 25M sleep select 5:30 4.64% Xorg
22368 f 2 0 246M 263M run poll 10:48 0.78% firefox
13203 f 2 0 2488K 3556K sleep kqread 1:41 0.63% tmux
24019 _sndio 2 -20 440K 956K idle poll 2:33 0.00% sndiod
10611 f 2 0 3620K 13M sleep poll 1:16 0.00% gkrellm
...
$ vmstat -i
interrupt total rate
irq0/clock 4465583 199
irq0/ipi 8587915 384
irq130/acpi0 4474 0
irq81/inteldrm0 1889 0
irq160/azalia0 1437612 64
irq85/ppb0 1 0
irq83/uhci2 1 0
irq84/uhci3 46 0
irq84/ehci0 911663 40
irq80/ahci0 1419214 63
irq129/pckbc0 22 0
irq131/pckbc0 92 0
Total 16828512 753
OpenBSD 5.7-current (GENERIC.MP) #798: Sun Apr 12 01:37:34 MDT 2015
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM) Duo CPU L2400 @ 1.66GHz ("GenuineIntel" 686-class) 1.67
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,MWAIT,VMX,EST,TM2,xTPR,PDCM,PERF
real mem = 2137341952 (2038MB)
avail mem = 2090119168 (1993MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 03/31/11, BIOS32 rev. 0 @ 0xfd690, SMBIOS rev. 2.4 @
0xe0010 (67 entries)
bios0: vendor LENOVO version "7BETD8WW (2.19 )" date 03/31/2011
bios0: LENOVO 1705CTO
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET SLIC BOOT SSDT SSDT SSDT
SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) DURT(S3) EXP0(S4) EXP1(S4) EXP2(S4)
EXP3(S4) PCI1(S4) USB0(S3) USB1(S3) USB2(S3) USB7(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 166MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) Duo CPU L2400 @ 1.66GHz ("GenuineIntel" 686-class) 1.67
GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,MWAIT,VMX,EST,TM2,xTPR,PDCM,PERF
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus 4 (EXP2)
acpiprt5 at acpi0: bus 12 (EXP3)
acpiprt6 at acpi0: bus 21 (PCI1)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpipwrres0 at acpi0: PUBS, resource for USB0, USB2, USB7
acpitz0 at acpi0: critical temperature is 127 degC
acpitz1 at acpi0: critical temperature is 97 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "42T4629" serial 327 type LION oem "SANYO"
acpibat1 at acpi0: BAT1 not present
acpibat2 at acpi0: BAT2 not present
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
acpidock0 at acpi0: GDCK not docked (0)
bios0: ROM list: 0xc0000/0xea00! 0xcf000/0x1000 0xd0000/0x1000 0xdc000/0x4000!
0xe0000/0x10000!
cpu0: Enhanced SpeedStep 1663 MHz: speeds: 1667, 1333, 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1024x768
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: Analog Devices AD1981HD, 0x0000/0x0000, using Analog Devices
AD1981HD
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 1 int 20
pci1 at ppb0 bus 2
em0 at pci1 dev 0 function 0 "Intel 82573L" rev 0x00: msi, address
00:16:d3:b6:19:57
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 1 int 21
pci2 at ppb1 bus 3
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 1 int 22
pci3 at ppb2 bus 4
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 1 int 23
pci4 at ppb3 bus 12
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 16
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 17
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 19
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 19
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 21
cbb0 at pci5 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xb4: apic 1 int 16
"Ricoh 5C552 Firewire" rev 0x09 at pci5 dev 0 function 1 not configured
sdhc0 at pci5 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x18: apic 1 int 18
sdmmc0 at sdhc0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 22 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: msi, AHCI 1.1
ahci0: port 0: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, TOSHIBA THNSNC12, CJSA> SCSI3 0/direct
fixed t10.ATA_TOSHIBA_THNSNC128GMMJ_Z05S1020THEZ
sd0: 122104MB, 512 bytes/sector, 250069680 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1 int 23
iic0 at ichiic0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
uhub5 at uhub0 port 5 "Terminus Technology USB 2.0 Hub" rev 2.00/1.11 addr 2
run0 at uhub5 port 1 "Ralink 802.11 n WLAN" rev 2.00/1.01 addr 3
run0: MAC/BBP RT3070 (rev 0x0201), RF RT3020 (MIMO 1T1R), address
10:6f:3f:ea:87:0c
uhidev0 at uhub5 port 2 configuration 1 interface 0 "vendor 0x1d57 2.4G
Receiver" rev 1.10/1.10 addr 4
uhidev0: iclass 3/1, 4 report ids
ums0 at uhidev0 reportid 1: 5 buttons, Z dir
wsmouse1 at ums0 mux 0
uhid0 at uhidev0 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev0 reportid 3: input=2, output=0, feature=0
uhid2 at uhidev0 reportid 4: input=1, output=0, feature=0
uhidev1 at uhub5 port 2 configuration 1 interface 1 "vendor 0x1d57 2.4G
Receiver" rev 1.10/1.10 addr 4
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes, country code 33
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub5 port 4 configuration 1 interface 0 "Areson USB Device" rev
1.10/0.01 addr 5
uhidev2: iclass 3/1
ums1 at uhidev2: 5 buttons, Z dir
wsmouse2 at ums1 mux 0
uhidev3 at uhub5 port 4 configuration 1 interface 1 "Areson USB Device" rev
1.10/0.01 addr 5
uhidev3: iclass 3/0, 1 report id
uhid3 at uhidev3 reportid 1: input=7, output=7, feature=0
ugen0 at uhub4 port 2 "STMicroelectronics Biometric Coprocessor" rev 1.00/0.01
addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (2a6c0cb2b714a4f0.a) swap on sd0b dump on sd0b
--
after two weeks of dieting, all i lost was two weeks.
