On Tue, Apr 14, 2015 at 10:41:56PM +0200, frantisek holop wrote:
> hello,
>
> i have hinted about this issue before, but it is
> becoming something that quite bothers me, so i
> thought i might ask for help.
>
> i have a thinkpad x60s. after resuming from lidsuspend,
> for no apparent reason the temperature keeps hanging
> around 70-71. if i make a reboot, it will go back to 55.
>
> not all resumings result in this higher temperature,
> but once it happens, it seems to keep this "state"
> after multiple lidsuspends, again, until reboot.
>
> any ideas how to track this down?
> no rogue interrupts, no high cpu usage...
>
Might want to try -current, a big fix for temperature / power
just went in.
-ml
>
> 2 users Load 1.25 1.16 1.14 (1-25 of 31) Tue Apr 14 22:32:59
> 2015
>
> SENSOR VALUE STATUS DESCRIPTION
> acpitz0.temp0 54.00 degC zone
> temperature
> acpitz1.temp0 72.00 degC zone
> temperature
> acpibtn0.indicator0 On lid open
> acpibat0.volt0 14.40 V DC voltage
> acpibat0.volt1 16.43 V DC current voltage
> acpibat0.power0 0.00 W rate
> acpibat0.watthour0 21.75 Wh last full
> capacity
> acpibat0.watthour1 1.09 Wh warning
> capacity
> acpibat0.watthour2 0.20 Wh low capacity
> acpibat0.watthour3 20.91 Wh OK remaining
> capacity
> acpibat0.watthour4 28.80 Wh design capacity
> acpibat0.raw0 0 raw OK battery idle
> acpiac0.indicator0 On power supply
> acpithinkpad0.temp0 54.00 degC
> acpithinkpad0.temp1 44.00 degC
> acpithinkpad0.temp3 51.00 degC
> acpithinkpad0.temp4 32.00 degC
> acpithinkpad0.temp6 31.00 degC
> acpithinkpad0.fan0 3090 RPM
> acpidock0.indicator0 Off unknown not docked
> cpu0.temp0 72.00 degC
> aps0.temp0 44.00 degC
> aps0.temp1 44.00 degC
> aps0.indicator0 Off Keyboard Active
> aps0.indicator1 Off Mouse Active
> aps0.indicator2 On Lid Open
> aps0.raw0 465 raw X_ACCEL
> aps0.raw1 512 raw Y_ACCEL
> aps0.raw2 465 raw X_VAR
> aps0.raw3 512 raw Y_VAR
> softraid0.drive0 online OK sd1
>
>
> load averages: 1.51, 1.27, 1.18
> 61 processes: 1 running, 58 idle, 2 on processor
> CPU0 states: 0.0% user, 0.0% nice, 0.2% system, 0.0% interrupt, 99.8% idle
> CPU1 states: 3.8% user, 0.0% nice, 2.2% system, 0.0% interrupt, 94.0% idle
> Memory: Real: 341M/865M act/tot Free: 1129M Cache: 365M Swap: 0K/2252M
>
> PID USERNAME PRI NICE SIZE RES STATE WAIT TIME CPU COMMAND
> 29231 _x11 2 0 15M 25M sleep select 5:30 4.64% Xorg
> 22368 f 2 0 246M 263M run poll 10:48 0.78% firefox
> 13203 f 2 0 2488K 3556K sleep kqread 1:41 0.63% tmux
> 24019 _sndio 2 -20 440K 956K idle poll 2:33 0.00% sndiod
> 10611 f 2 0 3620K 13M sleep poll 1:16 0.00% gkrellm
> ...
>
>
> $ vmstat -i
> interrupt total rate
> irq0/clock 4465583 199
> irq0/ipi 8587915 384
> irq130/acpi0 4474 0
> irq81/inteldrm0 1889 0
> irq160/azalia0 1437612 64
> irq85/ppb0 1 0
> irq83/uhci2 1 0
> irq84/uhci3 46 0
> irq84/ehci0 911663 40
> irq80/ahci0 1419214 63
> irq129/pckbc0 22 0
> irq131/pckbc0 92 0
> Total 16828512 753
>
>
>
> OpenBSD 5.7-current (GENERIC.MP) #798: Sun Apr 12 01:37:34 MDT 2015
> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel(R) Core(TM) Duo CPU L2400 @ 1.66GHz ("GenuineIntel" 686-class)
> 1.67 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,MWAIT,VMX,EST,TM2,xTPR,PDCM,PERF
> real mem = 2137341952 (2038MB)
> avail mem = 2090119168 (1993MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: date 03/31/11, BIOS32 rev. 0 @ 0xfd690, SMBIOS rev. 2.4 @
> 0xe0010 (67 entries)
> bios0: vendor LENOVO version "7BETD8WW (2.19 )" date 03/31/2011
> bios0: LENOVO 1705CTO
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET SLIC BOOT SSDT SSDT
> SSDT SSDT
> acpi0: wakeup devices LID_(S3) SLPB(S3) DURT(S3) EXP0(S4) EXP1(S4) EXP2(S4)
> EXP3(S4) PCI1(S4) USB0(S3) USB1(S3) USB2(S3) USB7(S3) HDEF(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpiec0 at acpi0
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> cpu0: apic clock running at 166MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM) Duo CPU L2400 @ 1.66GHz ("GenuineIntel" 686-class)
> 1.67 GHz
> cpu1:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,MWAIT,VMX,EST,TM2,xTPR,PDCM,PERF
> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 2, remapped to apid 1
> acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63
> acpihpet0 at acpi0: 14318179 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (AGP_)
> acpiprt2 at acpi0: bus 2 (EXP0)
> acpiprt3 at acpi0: bus 3 (EXP1)
> acpiprt4 at acpi0: bus 4 (EXP2)
> acpiprt5 at acpi0: bus 12 (EXP3)
> acpiprt6 at acpi0: bus 21 (PCI1)
> acpicpu0 at acpi0: C3, C2, C1, PSS
> acpicpu1 at acpi0: C3, C2, C1, PSS
> acpipwrres0 at acpi0: PUBS, resource for USB0, USB2, USB7
> acpitz0 at acpi0: critical temperature is 127 degC
> acpitz1 at acpi0: critical temperature is 97 degC
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: SLPB
> acpibat0 at acpi0: BAT0 model "42T4629" serial 327 type LION oem "SANYO"
> acpibat1 at acpi0: BAT1 not present
> acpibat2 at acpi0: BAT2 not present
> acpiac0 at acpi0: AC unit online
> acpithinkpad0 at acpi0
> acpidock0 at acpi0: GDCK not docked (0)
> bios0: ROM list: 0xc0000/0xea00! 0xcf000/0x1000 0xd0000/0x1000
> 0xdc000/0x4000! 0xe0000/0x10000!
> cpu0: Enhanced SpeedStep 1663 MHz: speeds: 1667, 1333, 1000 MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
> vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
> intagp0 at vga1
> agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
> inteldrm0 at vga1
> drm0 at inteldrm0
> inteldrm0: 1024x768
> wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
> azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
> azalia0: codecs: Analog Devices AD1981HD, 0x0000/0x0000, using Analog Devices
> AD1981HD
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 1 int 20
> pci1 at ppb0 bus 2
> em0 at pci1 dev 0 function 0 "Intel 82573L" rev 0x00: msi, address
> 00:16:d3:b6:19:57
> ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 1 int 21
> pci2 at ppb1 bus 3
> ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 1 int 22
> pci3 at ppb2 bus 4
> ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 1 int 23
> pci4 at ppb3 bus 12
> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 16
> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 17
> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18
> uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 19
> ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 19
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
> pci5 at ppb4 bus 21
> cbb0 at pci5 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xb4: apic 1 int 16
> "Ricoh 5C552 Firewire" rev 0x09 at pci5 dev 0 function 1 not configured
> sdhc0 at pci5 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x18: apic 1 int 18
> sdmmc0 at sdhc0
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 22 device 0 cacheline 0x8, lattimer 0xb0
> pcmcia0 at cardslot0
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
> pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel
> 0 configured to compatibility, channel 1 configured to compatibility
> pciide0: channel 0 disabled (no drives)
> pciide0: channel 1 ignored (disabled)
> ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: msi, AHCI 1.1
> ahci0: port 0: 1.5Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, TOSHIBA THNSNC12, CJSA> SCSI3 0/direct
> fixed t10.ATA_TOSHIBA_THNSNC128GMMJ_Z05S1020THEZ
> sd0: 122104MB, 512 bytes/sector, 250069680 sectors, thin
> ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1 int
> 23
> iic0 at ichiic0
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> aps0 at isa0 port 0x1600/31
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> uhub5 at uhub0 port 5 "Terminus Technology USB 2.0 Hub" rev 2.00/1.11 addr 2
> run0 at uhub5 port 1 "Ralink 802.11 n WLAN" rev 2.00/1.01 addr 3
> run0: MAC/BBP RT3070 (rev 0x0201), RF RT3020 (MIMO 1T1R), address
> 10:6f:3f:ea:87:0c
> uhidev0 at uhub5 port 2 configuration 1 interface 0 "vendor 0x1d57 2.4G
> Receiver" rev 1.10/1.10 addr 4
> uhidev0: iclass 3/1, 4 report ids
> ums0 at uhidev0 reportid 1: 5 buttons, Z dir
> wsmouse1 at ums0 mux 0
> uhid0 at uhidev0 reportid 2: input=1, output=0, feature=0
> uhid1 at uhidev0 reportid 3: input=2, output=0, feature=0
> uhid2 at uhidev0 reportid 4: input=1, output=0, feature=0
> uhidev1 at uhub5 port 2 configuration 1 interface 1 "vendor 0x1d57 2.4G
> Receiver" rev 1.10/1.10 addr 4
> uhidev1: iclass 3/1
> ukbd0 at uhidev1: 8 variable keys, 6 key codes, country code 33
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev2 at uhub5 port 4 configuration 1 interface 0 "Areson USB Device" rev
> 1.10/0.01 addr 5
> uhidev2: iclass 3/1
> ums1 at uhidev2: 5 buttons, Z dir
> wsmouse2 at ums1 mux 0
> uhidev3 at uhub5 port 4 configuration 1 interface 1 "Areson USB Device" rev
> 1.10/0.01 addr 5
> uhidev3: iclass 3/0, 1 report id
> uhid3 at uhidev3 reportid 1: input=7, output=7, feature=0
> ugen0 at uhub4 port 2 "STMicroelectronics Biometric Coprocessor" rev
> 1.00/0.01 addr 2
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> root on sd0a (2a6c0cb2b714a4f0.a) swap on sd0b dump on sd0b
> --
> after two weeks of dieting, all i lost was two weeks.
