On Wed, Apr 29, 2015 at 11:18:05PM +0200, frantisek holop wrote:
> since the apr 24 snapshot, doing a lidsuspend
> results in a reboot when raising the lid.
> this has worked as recently back as the 12 april
> snapshot.
>
> can anybody reproduce this?
>
Please try a later snapshot as there were various resume fixes that went
in around the 26th.
-ml
>
> OpenBSD 5.7-current (GENERIC.MP) #834: Fri Apr 24 00:00:30 MDT 2015
> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel(R) Core(TM) Duo CPU L2400 @ 1.66GHz ("GenuineIntel" 686-class)
> 1.67 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,MWAIT,VMX,EST,TM2,xTPR,PDCM,PERF
> real mem = 2137341952 (2038MB)
> avail mem = 2090110976 (1993MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: date 03/31/11, BIOS32 rev. 0 @ 0xfd690, SMBIOS rev. 2.4 @
> 0xe0010 (67 entries)
> bios0: vendor LENOVO version "7BETD8WW (2.19 )" date 03/31/2011
> bios0: LENOVO 1705CTO
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET SLIC BOOT SSDT SSDT
> SSDT SSDT
> acpi0: wakeup devices LID_(S3) SLPB(S3) DURT(S3) EXP0(S4) EXP1(S4) EXP2(S4)
> EXP3(S4) PCI1(S4) USB0(S3) USB1(S3) USB2(S3) USB7(S3) HDEF(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpiec0 at acpi0
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> cpu0: apic clock running at 166MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM) Duo CPU L2400 @ 1.66GHz ("GenuineIntel" 686-class)
> 1.67 GHz
> cpu1:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,MWAIT,VMX,EST,TM2,xTPR,PDCM,PERF
> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 2, remapped to apid 1
> acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63
> acpihpet0 at acpi0: 14318179 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (AGP_)
> acpiprt2 at acpi0: bus 2 (EXP0)
> acpiprt3 at acpi0: bus 3 (EXP1)
> acpiprt4 at acpi0: bus 4 (EXP2)
> acpiprt5 at acpi0: bus 12 (EXP3)
> acpiprt6 at acpi0: bus 21 (PCI1)
> acpicpu0 at acpi0: C3, C2, C1, PSS
> acpicpu1 at acpi0: C3, C2, C1, PSS
> acpipwrres0 at acpi0: PUBS, resource for USB0, USB2, USB7
> acpitz0 at acpi0: critical temperature is 127 degC
> acpitz1 at acpi0: critical temperature is 97 degC
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: SLPB
> acpibat0 at acpi0: BAT0 model "42T4629" serial 327 type LION oem "SANYO"
> acpibat1 at acpi0: BAT1 not present
> acpibat2 at acpi0: BAT2 not present
> acpiac0 at acpi0: AC unit online
> acpithinkpad0 at acpi0
> acpidock0 at acpi0: GDCK not docked (0)
> bios0: ROM list: 0xc0000/0xea00! 0xcf000/0x1000 0xd0000/0x1000
> 0xdc000/0x4000! 0xe0000/0x10000!
> cpu0: Enhanced SpeedStep 1663 MHz: speeds: 1667, 1333, 1000 MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
> vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
> intagp0 at vga1
> agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
> inteldrm0 at vga1
> drm0 at inteldrm0
> inteldrm0: 1024x768
> wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
> azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
> azalia0: codecs: Analog Devices AD1981HD, 0x0000/0x0000, using Analog Devices
> AD1981HD
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 1 int 20
> pci1 at ppb0 bus 2
> em0 at pci1 dev 0 function 0 "Intel 82573L" rev 0x00: msi, address
> 00:16:d3:b6:19:57
> ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 1 int 21
> pci2 at ppb1 bus 3
> ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 1 int 22
> pci3 at ppb2 bus 4
> ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 1 int 23
> pci4 at ppb3 bus 12
> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 16
> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 17
> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18
> uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 19
> ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 19
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
> pci5 at ppb4 bus 21
> cbb0 at pci5 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xb4: apic 1 int 16
> "Ricoh 5C552 Firewire" rev 0x09 at pci5 dev 0 function 1 not configured
> sdhc0 at pci5 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x18: apic 1 int 18
> sdmmc0 at sdhc0
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 22 device 0 cacheline 0x8, lattimer 0xb0
> pcmcia0 at cardslot0
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
> pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel
> 0 configured to compatibility, channel 1 configured to compatibility
> pciide0: channel 0 disabled (no drives)
> pciide0: channel 1 ignored (disabled)
> ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: msi, AHCI 1.1
> ahci0: port 0: 1.5Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, TOSHIBA THNSNC12, CJSA> SCSI3 0/direct
> fixed t10.ATA_TOSHIBA_THNSNC128GMMJ_Z05S1020THEZ
> sd0: 122104MB, 512 bytes/sector, 250069680 sectors, thin
> ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1 int
> 23
> iic0 at ichiic0
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> aps0 at isa0 port 0x1600/31
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> uhub5 at uhub0 port 5 "Terminus Technology USB 2.0 Hub" rev 2.00/1.11 addr 2
> uhub5: device problem, disabling port 1
> uhidev0 at uhub5 port 2 configuration 1 interface 0 "vendor 0x1d57 2.4G
> Receiver" rev 1.10/1.10 addr 3
> uhidev0: iclass 3/1, 4 report ids
> ums0 at uhidev0 reportid 1: 5 buttons, Z dir
> wsmouse1 at ums0 mux 0
> uhid0 at uhidev0 reportid 2: input=1, output=0, feature=0
> uhid1 at uhidev0 reportid 3: input=2, output=0, feature=0
> uhid2 at uhidev0 reportid 4: input=1, output=0, feature=0
> uhidev1 at uhub5 port 2 configuration 1 interface 1 "vendor 0x1d57 2.4G
> Receiver" rev 1.10/1.10 addr 3
> uhidev1: iclass 3/1
> ukbd0 at uhidev1: 8 variable keys, 6 key codes, country code 33
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev2 at uhub5 port 3 configuration 1 interface 0 "Genius 2.4G Wireless
> Mouse" rev 2.00/5.19 addr 4
> uhidev2: iclass 3/1, 5 report ids
> ums1 at uhidev2 reportid 1: 3 buttons, Z dir
> wsmouse2 at ums1 mux 0
> uhid3 at uhidev2 reportid 2: input=1, output=0, feature=0
> uhid4 at uhidev2 reportid 3: input=2, output=0, feature=0
> uhid5 at uhidev2 reportid 5: input=0, output=0, feature=7
> uhidev3 at uhub5 port 4 configuration 1 interface 0 "Areson USB Device" rev
> 1.10/0.01 addr 5
> uhidev3: iclass 3/1
> ums2 at uhidev3: 5 buttons, Z dir
> wsmouse3 at ums2 mux 0
> uhidev4 at uhub5 port 4 configuration 1 interface 1 "Areson USB Device" rev
> 1.10/0.01 addr 5
> uhidev4: iclass 3/0, 1 report id
> uhid6 at uhidev4 reportid 1: input=7, output=7, feature=0
> ugen0 at uhub4 port 2 "STMicroelectronics Biometric Coprocessor" rev
> 1.00/0.01 addr 2
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> root on sd0a (2a6c0cb2b714a4f0.a) swap on sd0b dump on sd0b
> WARNING: / was not properly unmounted
> --
> the purpose of life is life with a purpose.
