Hi folks,
Any pointers on printing with an HP LaserJet 1100?
This one is connected via a USB convertor to a 5.6 release box:
$ dmesg | fgrep lp
ulpt0 at uhub0 port 2 configuration 1 interface 0 "Pr?lific Technology Inc.
IEEE-1284 Controller" rev 1.00/2.00 addr 3
ulpt0: using bi-directional mode
/etc/printcap:
lp|local line printer:\
:lp=/dev/ulpt0:\
:sd=/var/spool/output:\
:lf=/var/log/lpd-errs:\
:if=/usr/libexec/lpr/lpf:
#:sf:\
#:sh:\
#:tr=^D:
$ ls -l /dev/*lp*
crw------- 1 root wheel 16, 128 Apr 13 21:13 /dev/lpa0
crw------- 1 root wheel 16, 129 Apr 13 21:13 /dev/lpa1
crw------- 1 root wheel 16, 130 Apr 13 21:13 /dev/lpa2
crw------- 1 root wheel 16, 0 Apr 13 21:13 /dev/lpt0
crw------- 1 root wheel 16, 1 Apr 13 21:13 /dev/lpt1
crw------- 1 root wheel 16, 2 Apr 13 21:13 /dev/lpt2
crw-rw---- 1 root wheel 64, 0 May 15 12:07 /dev/ulpt0
crw-rw---- 1 root wheel 64, 1 Apr 13 21:13 /dev/ulpt1
$ fgrep lpd /etc/rc.conf.local
lpd_flags='-l -s'
$ sudo /etc/rc.d/lpd start
Password:
lpd(ok)
$ file /tmp/output.ps
/tmp/output.ps: PostScript document text conforming DSC level 3.0, Level 2
$ lpr -m -s /tmp/output.ps
$ lpq
lp is ready and printing
Rank Owner Job Files Total Size
active craig 7 /tmp/output.ps 54074 bytes
$ lpc status
lp:
queuing is enabled
printing is enabled
1 entry in spool area
lp is ready and printing
$ fstat /dev/ulpt0
USER CMD PID FD MOUNT INUM MODE R/W SZ|DV NAME
daemon lpd 27392 5 / 9065 crw-rw---- w ulpt0
/dev/ulpt0
The printer lights don't change & paper doesn't move.
What printcap/other settings should I change?
Some pages I've looked at:
http://openbsd-archive.7691.n7.nabble.com/HP-LaserJet-P2015-on-OpenBSD-BEWARE-td56055.html
http://www.linuxmisc.com/27-openbsd/b93483a47d08465b.htm
http://www.openprinting.org/printer/HP/HP-LaserJet_1100
http://daemonforums.org/showthread.php?t=5733
http://compgroups.net/comp.unix.bsd.openbsd.misc/hp-laserjet-1000w-+-openbsd-3.8/2719043
Thanks.
--
All things are possible, except skiing thru a revolving door.
