On Fri, May 22, 2015 at 03:57:02PM +0100, Craig Skinner wrote: > On 2015-05-15 Fri 06:50 AM |, Edgar Pettijohn III wrote: > > On May 15, 2015, at 6:45 AM, Craig Skinner wrote: > > > > > Hi folks, > > > > > > Any pointers on printing with an HP LaserJet 1100? > > > > > > This one is connected via a USB convertor to a 5.6 release box: > > > > > > $ dmesg | fgrep lp > > > ulpt0 at uhub0 port 2 configuration 1 interface 0 "Pr?lific Technology > > > Inc. IEEE-1284 Controller" rev 1.00/2.00 addr 3 > > > ulpt0: using bi-directional mode > > > > > > > Have you tried using hplip? It shows to be a supported printer. > > > > > Thanks Edgar & Naddy for pointing out that package to me! > > Progess has .... been .... made...., but not printing yet.....
What is the version of the cups package you are running? > > The dbus_daemon & cupsd are running, /dev stuff chowned, ulpt disabled > in the kernel, rebooted & confirmed. > > With a CUPS webadmin 'Add Printer' Connection URI of: usb:/dev/usb1 > cupsd generates a decent looking .ppd file, > but printing of a test page continues to stay at: > "Waiting for printer to become available." > > > What I've fiddled about with so far is: > > > > $ cd /usr/local/share/doc/pkg-readmes/ > $ less hplip-common-* cups-* foomatic-* > > > $ uname -mrsv > OpenBSD 5.6 GENERIC#274 i386 > > $ dmesg | tail > uhidev0: iclass 3/1 > ums0 at uhidev0: 3 buttons, Z dir > wsmouse1 at ums0 mux 0 > uhidev1 at uhub1 port 1 configuration 1 interface 0 "Dell Dell USB Keyboard" > rev 1.10/3.06 addr 2 > uhidev1: iclass 3/1 > ukbd0 at uhidev1: 8 variable keys, 6 key codes > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > ulpt0 at uhub0 port 2 configuration 1 interface 0 "Pr?lific Technology Inc. > IEEE-1284 Controller" rev 1.00/2.00 addr 3 > ulpt0: using bi-directional mode > > $ dmesg | fgrep ulpt > ulpt0 at uhub1 port 2 configuration 1 interface 0 "Pr?lific Technology Inc. > IEEE-1284 Controller" rev 1.00/2.00 addr 3 > ulpt0: using bi-directional mode > > > $ sudo usbdevs -vd > Controller /dev/usb0: > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > uhub4 > port 1 powered > port 2 powered > port 3 powered > port 4 powered > port 5 powered > port 6 powered > port 7 addr 2: high speed, power 500 mA, config 1, USB2.0-CRW(0x0158), > Generic(0x0bda), rev 58.88, iSerialNumber 200711XXXXXXXXX0 > umass0 > port 8 addr 3: high speed, power 128 mA, config 1, Lenovo > EasyCamera(0xb1b8), Chicony Corp.(0x04f2), rev 45.42 > uvideo0 > Controller /dev/usb1: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > uhub0 > port 1 addr 2: low speed, power 98 mA, config 1, Usb Mouse(0x0034), > SIGMACHIP(0x1c4f), rev 1.10 > uhidev0 > port 2 addr 3: full speed, power 100 mA, config 1, IEEE-1284 > Controller(0x2305), Pr?lific Technology Inc.(0x067b), rev 2.00 > ulpt0 > Controller /dev/usb2: > addr........................ > > > $ ls -l /dev/ugen0.* /dev/usb* > crw-rw---- 1 root wheel 63, 0 Apr 13 21:13 /dev/ugen0.00 > crw-rw---- 1 root wheel 63, 1 Apr 13 21:13 /dev/ugen0.01 > crw-rw---- 1 root wheel 63, 2 Apr 13 21:13 /dev/ugen0.02 > crw-rw---- 1 root wheel 63, 3 Apr 13 21:13 /dev/ugen0.03 > crw-rw---- 1 root wheel 63, 4 Apr 13 21:13 /dev/ugen0.04 > crw-rw---- 1 root wheel 63, 5 Apr 13 21:13 /dev/ugen0.05 > crw-rw---- 1 root wheel 63, 6 Apr 13 21:13 /dev/ugen0.06 > crw-rw---- 1 root wheel 63, 7 Apr 13 21:13 /dev/ugen0.07 > crw-rw---- 1 root wheel 63, 8 Apr 13 21:13 /dev/ugen0.08 > crw-rw---- 1 root wheel 63, 9 Apr 13 21:13 /dev/ugen0.09 > crw-rw---- 1 root wheel 63, 10 Apr 13 21:13 /dev/ugen0.10 > crw-rw---- 1 root wheel 63, 11 Apr 13 21:13 /dev/ugen0.11 > crw-rw---- 1 root wheel 63, 12 Apr 13 21:13 /dev/ugen0.12 > crw-rw---- 1 root wheel 63, 13 Apr 13 21:13 /dev/ugen0.13 > crw-rw---- 1 root wheel 63, 14 Apr 13 21:13 /dev/ugen0.14 > crw-rw---- 1 root wheel 63, 15 Apr 13 21:13 /dev/ugen0.15 > crw-rw---- 1 root wheel 61, 0 Apr 13 21:13 /dev/usb0 > crw-rw---- 1 root wheel 61, 1 Apr 13 21:13 /dev/usb1 > crw-rw---- 1 root wheel 61, 2 Apr 13 21:13 /dev/usb2 > crw-rw---- 1 root wheel 61, 3 Apr 13 21:13 /dev/usb3 > crw-rw---- 1 root wheel 61, 4 Apr 13 21:13 /dev/usb4 > crw-rw---- 1 root wheel 61, 5 Apr 13 21:13 /dev/usb5 > crw-rw---- 1 root wheel 61, 6 Apr 13 21:13 /dev/usb6 > crw-rw---- 1 root wheel 61, 7 Apr 13 21:13 /dev/usb7 > > > $ sudo chown _cups /dev/ugen0.* /dev/usb1 > > ****************** FIXME: use hotplug! *************************** > > > > $ ls -l /dev/ugen0.* /dev/usb* > crw-rw---- 1 _cups wheel 63, 0 Apr 13 21:13 /dev/ugen0.00 > crw-rw---- 1 _cups wheel 63, 1 Apr 13 21:13 /dev/ugen0.01 > crw-rw---- 1 _cups wheel 63, 2 Apr 13 21:13 /dev/ugen0.02 > crw-rw---- 1 _cups wheel 63, 3 Apr 13 21:13 /dev/ugen0.03 > crw-rw---- 1 _cups wheel 63, 4 Apr 13 21:13 /dev/ugen0.04 > crw-rw---- 1 _cups wheel 63, 5 Apr 13 21:13 /dev/ugen0.05 > crw-rw---- 1 _cups wheel 63, 6 Apr 13 21:13 /dev/ugen0.06 > crw-rw---- 1 _cups wheel 63, 7 Apr 13 21:13 /dev/ugen0.07 > crw-rw---- 1 _cups wheel 63, 8 Apr 13 21:13 /dev/ugen0.08 > crw-rw---- 1 _cups wheel 63, 9 Apr 13 21:13 /dev/ugen0.09 > crw-rw---- 1 _cups wheel 63, 10 Apr 13 21:13 /dev/ugen0.10 > crw-rw---- 1 _cups wheel 63, 11 Apr 13 21:13 /dev/ugen0.11 > crw-rw---- 1 _cups wheel 63, 12 Apr 13 21:13 /dev/ugen0.12 > crw-rw---- 1 _cups wheel 63, 13 Apr 13 21:13 /dev/ugen0.13 > crw-rw---- 1 _cups wheel 63, 14 Apr 13 21:13 /dev/ugen0.14 > crw-rw---- 1 _cups wheel 63, 15 Apr 13 21:13 /dev/ugen0.15 > crw-rw---- 1 root wheel 61, 0 Apr 13 21:13 /dev/usb0 > crw-rw---- 1 _cups wheel 61, 1 Apr 13 21:13 /dev/usb1 > crw-rw---- 1 root wheel 61, 2 Apr 13 21:13 /dev/usb2 > crw-rw---- 1 root wheel 61, 3 Apr 13 21:13 /dev/usb3 > crw-rw---- 1 root wheel 61, 4 Apr 13 21:13 /dev/usb4 > crw-rw---- 1 root wheel 61, 5 Apr 13 21:13 /dev/usb5 > crw-rw---- 1 root wheel 61, 6 Apr 13 21:13 /dev/usb6 > crw-rw---- 1 root wheel 61, 7 Apr 13 21:13 /dev/usb7 > > > > > $ ls -l /bsd* > -rw-r--r-- 1 root wheel 10691971 Apr 13 21:12 /bsd > -rw-r--r-- 1 root wheel 6918326 Apr 13 21:12 /bsd.rd > -rw-r--r-- 1 root wheel 10659734 Apr 13 21:12 /bsd.sp > $ sudo cp -p /bsd /bsd.mp > $ cmp /bsd /bsd.mp > $ > $ sudo config -o /bsd.disabled-ulpt -e /bsd > OpenBSD 5.6 (GENERIC.MP) #299: Fri Aug 8 00:10:33 MDT 2014 > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP > Enter 'help' for information > ukc> find ulpt > 403 ulpt* at uhub*|uhub* port -1 configuration -1 interface -1 vendor -1 > product -1 release -1 flags 0x0 > ukc> disable ulpt > 403 ulpt* disabled > ukc> find ulpt > 403 ulpt* at uhub*|uhub* disable port -1 configuration -1 interface -1 vendor > -1 product -1 release -1 flags 0x0 > ukc> quit > Saving modified kernel. > $ ls -l /bsd* > -rw-r--r-- 1 root wheel 10691971 Apr 13 21:12 /bsd > -rw-r--r-- 1 root wheel 10691971 Apr 13 21:12 /bsd.mp > -rwx------ 1 root wheel 10691971 May 21 12:46 /bsd.disabled-ulpt* > -rw-r--r-- 1 root wheel 6918326 Apr 13 21:12 /bsd.rd > -rw-r--r-- 1 root wheel 10659734 Apr 13 21:12 /bsd.sp > $ umask > 077 > $ sudo chmod go+r /bsd.disabled-ulpt > $ ls -l /bsd* > -rw-r--r-- 1 root wheel 10691971 Apr 13 21:12 /bsd > -rw-r--r-- 1 root wheel 10691971 Apr 13 21:12 /bsd.mp > -rwxr--r-- 1 root wheel 10691971 May 21 12:46 /bsd.disabled-ulpt* > -rw-r--r-- 1 root wheel 6918326 Apr 13 21:12 /bsd.rd > -rw-r--r-- 1 root wheel 10659734 Apr 13 21:12 /bsd.sp > $ cmp /bsd /bsd.disabled-ulpt > /bsd /bsd.disabled-ulpt differ: char 9726923, line 32372 > $ diff /bsd /bsd.disabled-ulpt > Binary files /bsd and /bsd.disabled-ulpt differ > $ sudo cp /bsd.disabled-ulpt /bsd > $ ls -l /bsd* > -rw-r--r-- 1 root wheel 10691971 May 21 17:16 /bsd > -rwxr--r-- 1 root wheel 10691971 May 21 12:46 /bsd.disabled-ulpt* > -rw-r--r-- 1 root wheel 10691971 Apr 13 21:12 /bsd.mp > -rw-r--r-- 1 root wheel 6918326 Apr 13 21:12 /bsd.rd > -rw-r--r-- 1 root wheel 10659734 Apr 13 21:12 /bsd.sp > $ cmp /bsd.mp /bsd > /bsd.mp /bsd differ: char 9726923, line 32372 > $ sudo hp-setup -i > Password: > > HP Linux Imaging and Printing System (ver. 3.14.6) > Printer/Fax Setup Utility ver. 9.0 > > Copyright (c) 2001-13 Hewlett-Packard Development Company, LP > This software comes with ABSOLUTELY NO WARRANTY. > This is free software, and you are welcome to distribute it > under certain conditions. See COPYING file for more details. > > (Note: Defaults for each question are maked with a '*'. Press <enter> to > accept the default.) > > > -------------------------------- > | SELECT CONNECTION (I/O) TYPE | > -------------------------------- > > Num Connection Description > > Type > > -------- ---------- > ---------------------------------------------------------- > 0* usb Universal Serial Bus (USB) > > 1 net Network/Ethernet/Wireless (direct connection or > JetDirect) > > Enter number 0...1 for connection type (q=quit, enter=usb*) ? 0 > > Using connection type: usb > > error: No device selected/specified or that supports this functionality. > $ sudo reboot > > > > $ dmesg | fgrep ulpt > $ config -e /bsd > WARNING no output file specified > OpenBSD 5.6 (GENERIC.MP) #299: Fri Aug 8 00:10:33 MDT 2014 > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP > Enter 'help' for information > ukc> find ulpt > 403 ulpt* at uhub*|uhub* disable port -1 configuration -1 interface -1 vendor > -1 product -1 release -1 flags 0x0 > ukc> exit > $ sudo usbdevs -vd > .... > ... > .. > Controller /dev/usb1: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > uhub1 > port 1 addr 2: low speed, power 98 mA, config 1, Usb Mouse(0x0034), > SIGMACHIP(0x1c4f), rev 1.10 > uhidev0 > port 2 addr 3: full speed, power 100 mA, config 1, IEEE-1284 > Controller(0x2305), Pr?lific Technology Inc.(0x067b), rev 2.00 > ugen0 > .... > ... > .. > $ ls -l /dev/ugen0.* /dev/usb1 > crw-rw---- 1 _cups wheel 63, 0 Apr 13 21:13 /dev/ugen0.00 > crw-rw---- 1 _cups wheel 63, 1 Apr 13 21:13 /dev/ugen0.01 > crw-rw---- 1 _cups wheel 63, 2 Apr 13 21:13 /dev/ugen0.02 > crw-rw---- 1 _cups wheel 63, 3 Apr 13 21:13 /dev/ugen0.03 > crw-rw---- 1 _cups wheel 63, 4 Apr 13 21:13 /dev/ugen0.04 > crw-rw---- 1 _cups wheel 63, 5 Apr 13 21:13 /dev/ugen0.05 > crw-rw---- 1 _cups wheel 63, 6 Apr 13 21:13 /dev/ugen0.06 > crw-rw---- 1 _cups wheel 63, 7 Apr 13 21:13 /dev/ugen0.07 > crw-rw---- 1 _cups wheel 63, 8 Apr 13 21:13 /dev/ugen0.08 > crw-rw---- 1 _cups wheel 63, 9 Apr 13 21:13 /dev/ugen0.09 > crw-rw---- 1 _cups wheel 63, 10 Apr 13 21:13 /dev/ugen0.10 > crw-rw---- 1 _cups wheel 63, 11 Apr 13 21:13 /dev/ugen0.11 > crw-rw---- 1 _cups wheel 63, 12 Apr 13 21:13 /dev/ugen0.12 > crw-rw---- 1 _cups wheel 63, 13 Apr 13 21:13 /dev/ugen0.13 > crw-rw---- 1 _cups wheel 63, 14 Apr 13 21:13 /dev/ugen0.14 > crw-rw---- 1 _cups wheel 63, 15 Apr 13 21:13 /dev/ugen0.15 > crw-rw---- 1 _cups wheel 61, 1 Apr 13 21:13 /dev/usb1 > $ /etc/rc.d/dbus_daemon check && /etc/rc.d/cupsd check && sudo hp-setup -i > Password: > > HP Linux Imaging and Printing System (ver. 3.14.6) > Printer/Fax Setup Utility ver. 9.0 > > Copyright (c) 2001-13 Hewlett-Packard Development Company, LP > This software comes with ABSOLUTELY NO WARRANTY. > This is free software, and you are welcome to distribute it > under certain conditions. See COPYING file for more details. > > (Note: Defaults for each question are maked with a '*'. Press <enter> to > accept the default.) > > > -------------------------------- > | SELECT CONNECTION (I/O) TYPE | > -------------------------------- > > Num Connection Description > > Type > > -------- ---------- > ---------------------------------------------------------- > 0* usb Universal Serial Bus (USB) > > 1 net Network/Ethernet/Wireless (direct connection or > JetDirect) > > Enter number 0...1 for connection type (q=quit, enter=usb*) ? 0 > > Using connection type: usb > > error: No device selected/specified or that supports this functionality. > > > > $ hp-makeuri -g 001:002 > > HP Linux Imaging and Printing System (ver. 3.14.6) > Device URI Creation Utility ver. 5.0 > > Copyright (c) 2001-13 Hewlett-Packard Development Company, LP > This software comes with ABSOLUTELY NO WARRANTY. > This is free software, and you are welcome to distribute it > under certain conditions. See COPYING file for more details. > > error: Device not found > > $ hp-makeuri -g 001:003 > ... > error: Device not found > $ hp-makeuri -g 002:003 > ... > error: Device not found > $ hp-makeuri -g 002:002 > ... > error: Device not found > > $ hp-makeuri -g FRHR16<... (serial number)> > > HP Linux Imaging and Printing System (ver. 3.14.6) > Device URI Creation Utility ver. 5.0 > > Copyright (c) 2001-13 Hewlett-Packard Development Company, LP > This software comes with ABSOLUTELY NO WARRANTY. > This is free software, and you are welcome to distribute it > under certain conditions. See COPYING file for more details. > > getaddrinfo: FRHR16.... no address associated with name > getaddrinfo: FRHR16.... no address associated with name > error: Device not found > $ > > > > > $ dmesg | fgrep IEEE-1284 > ugen0 at uhub1 port 2 "Pr?lific Technology Inc. IEEE-1284 Controller" rev > 1.00/2.00 addr 3 > $ hp-config_usb_printer -g 001:002 > hp-config_usb_printer[7949]: debug: param=001:002 > error: This is not a valid device > > > > $ cd /tmp > $ foomatic-ppdfile -P 1100 > ... > .. > HP LaserJet 1100 Id='HP-LaserJet_1100' Driver='hplip' > CompatibleDrivers='gutenprint hplip lj4dith ljet4 omni ' > ... > .. > $ foomatic-ppdfile -p 'HP-LaserJet_1100' > /tmp/hp-laserjet-1100.ppd > ERROR: foomatic-ppdfile: There is neither a custom PPD file nor the driver > database entry contains sufficient data to build a PPD file. > > > $ foomatic-ppdfile -p 'HP-LaserJet_1100' -d 'gutenprint' > > /tmp/hp-laserjet-1100.ppd > ERROR: foomatic-ppdfile: There is neither a custom PPD file nor the driver > database entry contains sufficient data to build a PPD file. > > > $ view /usr/local/share/foomatic/db/source/driver/hplip.xml > $ view /usr/local/share/cups/drv/hp/hpcups.drv > > ModelName "HP LaserJet 1100" > Attribute "NickName" "" "HP LaserJet 1100, hpcups $Version" > Attribute "ShortNickName" "" "HP LaserJet 1100" > Attribute "1284DeviceID" "" "MFG:HP;MDL:hp laserjet 1100;DES:hp > laserjet 1100;" > PCFileName "hp-laserjet_1100.ppd" > > $ find /usr/local -type f -name "*hp-laserjet_1100.ppd*" > $ [nowt] > > > -=-=-=-=-=-=-=-=-= -=-=-=-=-=-=-=-=-= -=-=-=-=-=-=-=-=-= -=-=-=-=-=-=-=-=-= > > From: http://forums.openprinting.org/read.php?20,13380 > ( Linux + CUPS + another HP LaserJet ) > > $ sudo usb_printerid /dev/usb/lp0 > GET_DEVICE_ID string: > MFG:Hewlett-Packard;MDL:HP LaserJet Professional > P1102w;CMD:ZJS,PJL,ACL,HTTP;CLS:PRINTER;DES:HP LaserJet Professional > P1102w;FWVER:20091029; > > CUPS webadmin add printer URI is: > usb:/dev/usb/lp0 > -OR- > usb://HP/LaserJet%20Professional%20P1102w > > > -=-=-=-=-=-=-=-=-= -=-=-=-=-=-=-=-=-= -=-=-=-=-=-=-=-=-= -=-=-=-=-=-=-=-=-= > > https://localhost:631/admin > Add Printer > Connection: hp <<--- default > Connection: usb://HP/LaserJet%20%201100 > > > Add Printer > Name: LJ1100 > Description: Ye olde Lazar Jet > Location: Front room > Connection: usb://HP/LaserJet 1100 > Sharing: Do Not Share This Printer > Make: HP > Model: HP LaserJet 1100 HP CUPS 3.14.6 (en) > > [Add Printer] > > Unable to add printer: Bad device-uri "usb://HP/LaserJet 1100". > > -=-=-=-=-=-=-=-=-= -=-=-=-=-=-=-=-=-= -=-=-=-=-=-=-=-=-= -=-=-=-=-=-=-=-=-= > > https://localhost:631/admin > Add Printer > Connection: hp > Connection: usb:/dev/usb1 > > > Name: LJ1100 > Description: Ye olde Lazar Jet > Location: Front room > Connection: usb:/dev/usb1 > Sharing: Do Not Share This Printer > Make: HP > Model: HP LaserJet 1100 HP CUPS 3.14.6 (en) > > [Add Printer] > ... > .. > . > > ***** Success! ****** (++ happy dance +++) > > > -=-=-=-=-=-=-=-=-= -=-=-=-=-=-=-=-=-= -=-=-=-=-=-=-=-=-= -=-=-=-=-=-=-=-=-= > > CUPS web thing, Print Test Page + Go > says: "Processing page 1..." > then "Waiting for printer to become available." > No blinking lights on printer (they do when paper is removed/inserted) > > -=-=-=-=-=-=-=-=-= -=-=-=-=-=-=-=-=-= -=-=-=-=-=-=-=-=-= -=-=-=-=-=-=-=-=-= > > $ sudo diff -rq /tmp/cups /etc/cups > Password: > Only in /etc/cups/ppd: LJ1100.ppd > diff -rq /tmp/cups/printcap /etc/cups/printcap > Files /tmp/cups/printcap and /etc/cups/printcap differ > diff -rq /tmp/cups/printers.conf /etc/cups/printers.conf > Files /tmp/cups/printers.conf and /etc/cups/printers.conf differ > Only in /etc/cups: printers.conf.O > Only in /etc/cups/ssl: server.crt > Only in /etc/cups/ssl: server.key > $ ls -l /etc/cups/ppd/ > total 32 > -rw-r--r-- 1 root _cups 15187 May 22 14:14 LJ1100.ppd > $ diff -u /tmp/cups/printcap /etc/cups/printcap > --- /tmp/cups/printcap Tue May 19 13:23:05 2015 > +++ /etc/cups/printcap Fri May 22 14:15:10 2015 > @@ -1,3 +1,4 @@ > # This file was automatically generated by cupsd(8) from the > # /etc/cups/printers.conf file. All changes to this file > # will be lost. > +LJ1100|Ye olde Lazar Jet:rm=fir.internal:rp=LJ1100: > $ sudo diff -u /tmp/cups/printers.conf /etc/cups/printers.conf > --- /tmp/cups/printers.conf Sat May 16 11:50:23 2015 > +++ /etc/cups/printers.conf Fri May 22 14:15:10 2015 > @@ -0,0 +1,21 @@ > +# Printer configuration file for CUPS v1.7.4 > +# Written by cupsd on 2015-05-22 14:15 > +# DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING > +<Printer LJ1100> > +UUID urn:uuid:283eac27-f754-3a7e-6a77-b85df662b461 > +Info Ye olde Lazar Jet > +Location Front room > +MakeModel HP LaserJet 1100, hpcups 3.14.6 > +DeviceURI usb:/dev/usb1 > +State Idle > +StateTime 1432300406 > +Type 36892 > +Accepting Yes > +Shared No > +JobSheets none none > +QuotaPeriod 0 > +PageLimit 0 > +KLimit 0 > +OpPolicy default > +ErrorPolicy stop-printer > +</Printer> > > > > $ sudo find /var/spool/cups -ls > Password: > 467831 4 drwx--x--- 3 root _cups 512 May 22 14:47 > /var/spool/cups > 467843 4 drwxrwx--T 3 root _cups 512 May 22 14:44 > /var/spool/cups/tmp > 467869 4 drwxr-xr-x 2 root _cups 512 May 21 22:57 > /var/spool/cups/tmp/.hplip > 467836 80 -rw------- 1 _cups _cups 40106 May 22 14:16 > /var/spool/cups/tmp/gs_dbTj6U > 467884 480 -rw------- 1 _cups _cups 222834 May 22 14:16 > /var/spool/cups/tmp/gs_BatzTI > 467887 4 -rw------- 1 _cups _cups 408 May 22 14:16 > /var/spool/cups/tmp/gs_BMNzmi > 467923 80 -rw------- 1 _cups _cups 40106 May 22 14:44 > /var/spool/cups/tmp/gs_B2w2Uz > 467926 480 -rw------- 1 _cups _cups 222262 May 22 14:45 > /var/spool/cups/tmp/gs_0HFzxw > 467928 4 -rw------- 1 _cups _cups 408 May 22 14:45 > /var/spool/cups/tmp/gs_yvn0fu > 467922 4 -rw------- 1 root _cups 733 May 22 14:44 > /var/spool/cups/c00001 > 467885 4 -rw-r----- 1 root _cups 234 May 22 14:16 > /var/spool/cups/d00001-001 > 467940 4 -rw------- 1 root _cups 761 May 22 14:47 > /var/spool/cups/c00002 > 467925 4 -rw-r----- 1 root _cups 234 May 22 14:44 > /var/spool/cups/d00002-001 > > > > > > What else can I investigate? > -- > Fortune's Real-Life Courtroom Quote #37: > > > Q: Did he pick the dog up by the ears? > A: No. > Q: What was he doing with the dog's ears? > A: Picking them up in the air. > Q: Where was the dog at this time? > A: Attached to the ears. > -- Antoine
