When I touch the trackpad while running xfce4, the console and the
dmesg fill up with
pms0: not in sync yet, discard input (state n)
where n is mostly 0 or 3. And the result, rather than mouse cursor
movement, I get pop-up menus and such in semi-random places.
I haven't been able to make sense of what I've found on the web about
this. (Saw something about a potential regression in 5.4 current, but
I have no idea whether it's relevant, not sure which source the thread
refers to, and then the thread trails off ...)
dmesg follows. Relevant line seems to be
pms0: Elantech Touchpad, version 3, firmware 0x354f00
Also, the output of synclient -l might be relevant?
--------------------
$ synclient -l
Parameter settings:
LeftEdge = 89
RightEdge = 2155
TopEdge = 35
BottomEdge = 625
FingerLow = 1
FingerHigh = 1
MaxTapTime = 180
MaxTapMove = 102
MaxDoubleTapTime = 180
SingleTapTimeout = 180
ClickTime = 100
EmulateMidButtonTime = 75
EmulateTwoFingerMinZ = 282
EmulateTwoFingerMinW = 7
VertScrollDelta = 46
HorizScrollDelta = 46
VertEdgeScroll = 0
HorizEdgeScroll = 0
CornerCoasting = 0
VertTwoFingerScroll = 1
HorizTwoFingerScroll = 0
MinSpeed = 1
MaxSpeed = 1.75
AccelFactor = 0.0855066
TouchpadOff = 0
LockedDrags = 0
LockedDragTimeout = 5000
RTCornerButton = 0
RBCornerButton = 0
LTCornerButton = 0
LBCornerButton = 0
TapButton1 = 0
TapButton2 = 0
TapButton3 = 0
ClickFinger1 = 1
ClickFinger2 = 1
ClickFinger3 = 1
CircularScrolling = 0
CircScrollDelta = 0.1
CircScrollTrigger = 0
CircularPad = 0
PalmDetect = 0
PalmMinWidth = 10
PalmMinZ = 200
CoastingSpeed = 20
CoastingFriction = 50
PressureMotionMinZ = 30
PressureMotionMaxZ = 160
PressureMotionMinFactor = 1
PressureMotionMaxFactor = 1
GrabEventDevice = 0
TapAndDragGesture = 1
AreaLeftEdge = 0
AreaRightEdge = 0
AreaTopEdge = 0
AreaBottomEdge = 0
HorizHysteresis = 11
VertHysteresis = 11
ClickPad = 0
--------------------
But I have no idea what variables to monkey with. Well, I can
completely turn the touchpad off with
synclient TouchPadOff=1
;-)
Any suggestions appreciated.
--
Joel Rees
OpenBSD 5.7-stable (GENERIC.MP) #0: Thu May 28 06:12:04 JST 2015
r...@phool.my.domain:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 1835790336 (1750MB)
avail mem = 1783062528 (1700MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xe4800 (43 entries)
bios0: vendor Insyde version "F.0A" date 07/16/2014
bios0: Hewlett-Packard HP Pavilion 10 Notebook PC
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP UEFI HPET APIC MCFG ASF! BOOT FPDT MSDM SSDT
SSDT SSDT SSDT SSDT
acpi0: wakeup devices GPP0(S5) GPP1(S4) OHC1(S3) OHC2(S3) OHC3(S3)
EHC1(S3) EHC2(S3) EHC3(S3) XHC0(S4) AWAD(S4)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpihpet0 at acpi0: 14318180 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD A4-1200 APU with Radeon(TM) HD Graphics, 998.27 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,ITSC,BMI1
cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 1MB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.0.0.0.0, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD A4-1200 APU with Radeon(TM) HD Graphics, 998.14 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,ITSC,BMI1
cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 1MB
64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 21, 24 pins
ioapic1 at mainbus0: apid 5 pa 0xfec01000, version 21, 32 pins
ioapic1: misconfigured as apic 0, remapped to apid 5
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (GPP0)
acpiprt2 at acpi0: bus 5 (GPP1)
acpiprt3 at acpi0: bus -1 (GPP2)
acpiprt4 at acpi0: bus -1 (GPP3)
acpiprt5 at acpi0: bus -1 (GFX_)
acpiec0 at acpi0
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpipwrres0 at acpi0: FN00, resource for FAN0
acpitz0 at acpi0: critical temperature is 118 degC
acpibtn0 at acpi0: PWRB
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "Primary" serial 43346 03/09/2014 type
LIon oem "Hewlett-Packard"
acpibtn1 at acpi0: LID_
acpivideo0 at acpi0: VGA_
acpivideo1 at acpi0: VGA_
cpu0: 998 MHz: speeds: 1000 900 800 700 600 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD AMD64 16h Host" rev 0x00
vga1 at pci0 dev 1 function 0 vendor "ATI", unknown product 0x9839 rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci0 dev 1 function 1 vendor "ATI", unknown product 0x9840
rev 0x00: msi
azalia0: no supported codecs
pchb1 at pci0 dev 2 function 0 vendor "AMD", unknown product 0x1538 rev 0x00
ppb0 at pci0 dev 2 function 2 "AMD AMD64 16h PCIE" rev 0x00: msi
pci1 at ppb0 bus 1
rtsx0 at pci1 dev 0 function 0 "Realtek RTL8402 Card Reader" rev 0x01: msi
sdmmc0 at rtsx0
re0 at pci1 dev 0 function 2 "Realtek 8101E" rev 0x06: RTL8402
(0x4400), msi, address 14:58:d0:06:96:26
rlphy0 at re0 phy 7: RTL8201E 10/100 PHY, rev. 2
ppb1 at pci0 dev 2 function 3 "AMD AMD64 16h PCIE" rev 0x00: msi
pci2 at ppb1 bus 5
"Ralink RT3290" rev 0x00 at pci2 dev 0 function 0 not configured
"Ralink Bluetooth" rev 0x00 at pci2 dev 0 function 1 not configured
xhci0 at pci0 dev 16 function 0 vendor "AMD", unknown product 0x7814
rev 0x01: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "AMD xHCI root hub" rev 3.00/1.00 addr 1
ahci0 at pci0 dev 17 function 0 "AMD Hudson-2 SATA" rev 0x00: apic 0
int 19, AHCI 1.3
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, TOSHIBA MQ01ABF0, AM0P> SCSI3
0/direct fixed naa.50000395a340583a
sd0: 305245MB, 512 bytes/sector, 625142448 sectors
ohci0 at pci0 dev 18 function 0 "AMD Hudson-2 USB" rev 0x39: apic 0
int 18, version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "AMD Hudson-2 USB2" rev 0x39: apic 0 int 17
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 "AMD EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "AMD Hudson-2 USB" rev 0x39: apic 0
int 18, version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "AMD Hudson-2 USB2" rev 0x39: apic 0 int 17
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 "AMD EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "AMD Hudson-2 SMBus" rev 0x3a: polling
iic0 at piixpm0
azalia1 at pci0 dev 20 function 2 "AMD Hudson-2 HD Audio" rev 0x02: msi
azalia1: codecs: Realtek ALC269
audio0 at azalia1
pcib0 at pci0 dev 20 function 3 "AMD Hudson-2 LPC" rev 0x11
sdhc0 at pci0 dev 20 function 7 vendor "AMD", unknown product 0x7813
rev 0x01: apic 0 int 16
sdhc0 at 0x10: can't map registers
pchb2 at pci0 dev 24 function 0 "AMD AMD64 16h Link Cfg" rev 0x00
pchb3 at pci0 dev 24 function 1 "AMD AMD64 16h Address Map" rev 0x00
pchb4 at pci0 dev 24 function 2 "AMD AMD64 16h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 16h Misc Cfg" rev 0x00
pchb5 at pci0 dev 24 function 4 "AMD AMD64 16h CPU Power" rev 0x00
pchb6 at pci0 dev 24 function 5 vendor "AMD", unknown product 0x1535 rev 0x00
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 "AMD OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci1: USB revision 1.0
uhub4 at usb4 "AMD OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Elantech Touchpad, version 3, firmware 0x354f00
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uvideo0 at uhub1 port 4 configuration 1 interface 0 "Generic HP
Webcam-50" rev 2.00/5.26 addr 2
video0 at uvideo0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (c910159e72666593.a) swap on sd0b dump on sd0b
hw.sensors.acpitz0.temp0=61.00 degC (zone temperature)
hw.sensors.acpiac0.indicator0=On (power supply)
hw.sensors.acpibat0.volt0=10.80 VDC (voltage)
hw.sensors.acpibat0.volt1=12.41 VDC (current voltage)
hw.sensors.acpibat0.current0=0.00 A (rate)
hw.sensors.acpibat0.amphour0=2.26 Ah (last full capacity)
hw.sensors.acpibat0.amphour1=0.32 Ah (warning capacity)
hw.sensors.acpibat0.amphour2=0.21 Ah (low capacity)
hw.sensors.acpibat0.amphour3=2.26 Ah (remaining capacity), OK
hw.sensors.acpibat0.amphour4=2.26 Ah (design capacity)
hw.sensors.acpibat0.raw0=0 (battery full), OK
hw.sensors.acpibtn1.indicator0=On (lid open)
hw.sensors.km0.temp0=61.62 degC
