On 27/11/15 15:05, Carsten Kunze wrote: > installing a todays amd64 snapshot with image install58.fs ends with > "installboot: No blocks to load". What can be the problem?
I can confirm the problem. When installing an amd64 system with a snapshot dated 2015/11/28, the setup ends with the message:"installboot: No blocks to load" When trying to run manually installboot from the install shell, some files are reported as missing: ======================================================================= # installboot sd0a installboot: /usr/mdec/biosboot: No such file or directory # ls /usr/mdec mgr # ======================================================================= dmesg: ======================================================================= OpenBSD 5.8-current (RAMDISK_CD) #1514: Fri Nov 27 22:55:36 MST 2015 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD real mem = 17154310144 (16359MB) avail mem = 16632696832 (15862MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xef520 (67 entries) bios0: vendor LENOVO version "61KT33AUS" date 01/25/2010 bios0: LENOVO 415575G acpi0 at bios0: rev 2 acpi0: tables DSDT FACP SSDT SLIT TCPA SLIC SRAT DMAR APIC MCFG HPET BOOT ASF! acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Xeon(R) CPU E5540 @ 2.53GHz, 2667.13 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,NXE,LONG,LAHF,PERF,ITSC,SENSOR cpu0: 256KB 64b/line 8-way L2 cache cpu0: apic clock running at 133MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins acpiprt0 at acpi0: bus 1 (P0P1) acpiprt1 at acpi0: bus 2 (P0P3) acpiprt2 at acpi0: bus -1 (P0P5) acpiprt3 at acpi0: bus 3 (P0P7) acpiprt4 at acpi0: bus -1 (P0P9) acpiprt5 at acpi0: bus 0 (PCI0) acpiprt6 at acpi0: bus 4 (PEX1) acpiprt7 at acpi0: bus -1 (PEX2) acpiprt8 at acpi0: bus -1 (PEX3) acpiprt9 at acpi0: bus -1 (PEX4) acpiprt10 at acpi0: bus 5 (PEX5) acpiprt11 at acpi0: bus 6 (PEX6) acpiprt12 at acpi0: bus 10 (PCIB) pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel 5520 Host" rev 0x22 ppb0 at pci0 dev 1 function 0 "Intel X58 PCIE" rev 0x22: msi pci1 at ppb0 bus 1 vendor "Marvell", unknown product 0x6485 (class mass storage subclass RAID, rev 0x01) at pci1 dev 0 function 0 not configured ppb1 at pci0 dev 3 function 0 "Intel X58 PCIE" rev 0x22: msi pci2 at ppb1 bus 2 vga1 at pci2 dev 0 function 0 "ATI Radeon HD 5450" rev 0x00 wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation) "ATI Radeon HD 5470 Audio" rev 0x00 at pci2 dev 0 function 1 not configured ppb2 at pci0 dev 7 function 0 "Intel X58 PCIE" rev 0x22: msi pci3 at ppb2 bus 3 "ATI Radeon HD 5450" rev 0x00 at pci3 dev 0 function 0 not configured "ATI Radeon HD 5470 Audio" rev 0x00 at pci3 dev 0 function 1 not configured "Intel X58 Misc" rev 0x22 at pci0 dev 20 function 0 not configured "Intel X58 GPIO" rev 0x22 at pci0 dev 20 function 1 not configured "Intel X58 RAS" rev 0x22 at pci0 dev 20 function 2 not configured "Intel X58 QuickData" rev 0x22 at pci0 dev 22 function 0 not configured "Intel X58 QuickData" rev 0x22 at pci0 dev 22 function 1 not configured "Intel X58 QuickData" rev 0x22 at pci0 dev 22 function 2 not configured "Intel X58 QuickData" rev 0x22 at pci0 dev 22 function 3 not configured "Intel X58 QuickData" rev 0x22 at pci0 dev 22 function 4 not configured "Intel X58 QuickData" rev 0x22 at pci0 dev 22 function 5 not configured "Intel X58 QuickData" rev 0x22 at pci0 dev 22 function 6 not configured "Intel X58 QuickData" rev 0x22 at pci0 dev 22 function 7 not configured uhci0 at pci0 dev 26 function 0 "Intel 82801JI USB" rev 0x00: apic 8 int 16 uhci1 at pci0 dev 26 function 1 "Intel 82801JI USB" rev 0x00: apic 8 int 17 ehci0 at pci0 dev 26 function 7 "Intel 82801JI USB" rev 0x00: apic 8 int 18 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 "Intel 82801JI HD Audio" rev 0x00 at pci0 dev 27 function 0 not configured ppb3 at pci0 dev 28 function 0 "Intel 82801JI PCIE" rev 0x00: msi pci4 at ppb3 bus 4 ppb4 at pci0 dev 28 function 4 "Intel 82801JI PCIE" rev 0x00: msi pci5 at ppb4 bus 5 bge0 at pci5 dev 0 function 0 "Broadcom BCM5755" rev 0x02, BCM5755 A2 (0xa002): msi, address 00:27:13:53:bc:90 brgphy0 at bge0 phy 1: BCM5755 10/100/1000baseT PHY, rev. 0 ppb5 at pci0 dev 28 function 5 "Intel 82801JI PCIE" rev 0x00: msi pci6 at ppb5 bus 6 ppb6 at pci6 dev 0 function 0 vendor "IDT", unknown product 0x8039 rev 0x0e pci7 at ppb6 bus 7 ppb7 at pci7 dev 2 function 0 vendor "IDT", unknown product 0x8039 rev 0x0e pci8 at ppb7 bus 8 ppb8 at pci7 dev 3 function 0 vendor "IDT", unknown product 0x8039 rev 0x0e pci9 at ppb8 bus 9 bge1 at pci9 dev 0 function 0 "Broadcom BCM5754" rev 0x02, BCM5754/5787 A2 (0xb002): msi, address 00:27:13:53:bc:91 brgphy1 at bge1 phy 1: BCM5787 10/100/1000baseT PHY, rev. 0 uhci2 at pci0 dev 29 function 0 "Intel 82801JI USB" rev 0x00: apic 8 int 16 uhci3 at pci0 dev 29 function 1 "Intel 82801JI USB" rev 0x00: apic 8 int 17 uhci4 at pci0 dev 29 function 2 "Intel 82801JI USB" rev 0x00: apic 8 int 18 uhci5 at pci0 dev 29 function 3 "Intel 82801JI USB" rev 0x00: apic 8 int 19 ehci1 at pci0 dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 8 int 16 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb9 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x90 pci10 at ppb9 bus 10 "TI TSB43AB22 FireWire" rev 0x00 at pci10 dev 10 function 0 not configured "Intel 82801JIB LPC" rev 0x00 at pci0 dev 31 function 0 not configured ahci0 at pci0 dev 31 function 2 "Intel 82801JI AHCI" rev 0x00: msi, AHCI 1.2 ahci0: port 0: 1.5Gb/s ahci0: port 2: 3.0Gb/s scsibus0 at ahci0: 32 targets cd0 at scsibus0 targ 0 lun 0: <ATAPI, DVD A DH16AAS, JL34> ATAPI 5/cdrom removable sd0 at scsibus0 targ 2 lun 0: <ATA, Samsung SSD 850, EXM0> SCSI3 0/direct fixed naa.500253887013caa7 sd0: 122104MB, 512 bytes/sector, 250069680 sectors, thin "Intel 82801JI SMBus" rev 0x00 at pci0 dev 31 function 3 not configured usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb7 at uhci5: USB revision 1.0 uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at mainbus0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay1 uhidev0 at uhub7 port 1 configuration 1 interface 0 "LITE-ON Technology USB NetVista Full Width Keyboard." rev 1.10/1.09 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0 wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay1 softraid0 at root scsibus1 at softraid0: 256 targets PXE boot MAC address 00:27:13:53:bc:90, interface bge0 root on rd0a swap on rd0b dump on rd0b ======================================================================= Tail of /ai.log: ======================================================================= What timezone are you in? ('?' for list) [Europe/Paris] Europe/Paris Available disks are: sd0. Which disk is the root disk? ('?' for details) [sd0] sd0 Disk: sd0 geometry: 15566/255/63 [250069680 Sectors] Offset: 0 Signature: 0xAA55 Starting Ending LBA Info: #: id C H S - C H S [ start: size ] ------------------------------------------------------------------------------- 0: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused 1: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused 2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused *3: A6 0 1 2 - 15565 254 63 [ 64: 250067726 ] OpenBSD Use (W)hole disk MBR, use the (O)penBSD area or (E)dit the MBR? [OpenBSD] OpenBSD URL to autopartitioning template for disklabel? [none] http://10.121.1.2/wob.usr-disklabel.conf Fetching http://10.121.1.2/wob.usr-disklabel.conf /dev/rsd0a: 256.0MB in 524288 sectors of 512 bytes 4 cylinder groups of 64.00MB, 4096 blocks, 8192 inodes each /dev/rsd0b: 256.0MB in 524288 sectors of 512 bytes 4 cylinder groups of 64.00MB, 4096 blocks, 8192 inodes each /dev/rsd0e: 51200.0MB in 104857600 sectors of 512 bytes 253 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each /dev/rsd0f: 10240.0MB in 20971520 sectors of 512 bytes 51 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each /dev/rsd0g: 5120.0MB in 10485760 sectors of 512 bytes 26 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each /dev/rsd0h: 5120.0MB in 10485760 sectors of 512 bytes 26 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each /dev/rsd0j: 5120.0MB in 10485760 sectors of 512 bytes 26 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each /dev/rsd0i: 5120.0MB in 10485760 sectors of 512 bytes 26 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each /dev/sd0a (7255450ad36c487e.a) on /mnt type ffs (rw, asynchronous, local) /dev/sd0b (7255450ad36c487e.b) on /mnt/altroot type ffs (rw, asynchronous, local, nodev, nosuid) /dev/sd0e (7255450ad36c487e.e) on /mnt/home type ffs (rw, asynchronous, local, nodev, nosuid) /dev/sd0f (7255450ad36c487e.f) on /mnt/tmp type ffs (rw, asynchronous, local, nodev, nosuid) /dev/sd0g (7255450ad36c487e.g) on /mnt/usr type ffs (rw, asynchronous, local, nodev) /dev/sd0h (7255450ad36c487e.h) on /mnt/var type ffs (rw, asynchronous, local, nodev, nosuid) /dev/sd0j (7255450ad36c487e.j) on /mnt/var/log type ffs (rw, asynchronous, local, nodev, nosuid) /dev/sd0i (7255450ad36c487e.i) on /mnt/var/www type ffs (rw, asynchronous, local, nodev, nosuid) Let's install the sets! Location of sets? (cd0 disk http or 'done') [http] http HTTP proxy URL? (e.g. 'http://proxy:8080', or 'none') [none] none HTTP Server? (hostname, list#, 'done' or '?') [10.121.2.2] ftp.fr.openbsd.org Server directory? [pub/OpenBSD/snapshots/amd64] pub/OpenBSD/snapshots/amd64 Select sets by entering a set name, a file name pattern or 'all'. De-select sets by prepending a '-' to the set name, file name pattern or 'all'. Selected sets are labelled '[X]'. [X] bsd [X] base58.tgz [X] game58.tgz [X] xfont58.tgz [X] bsd.rd [X] comp58.tgz [X] xbase58.tgz [X] xserv58.tgz [X] bsd.mp [X] man58.tgz [X] xshare58.tgz Set name(s)? (or 'abort' or 'done') [done] done Get/Verify SHA256.sig 100% |**************************| 2152 00:00 Signature Verified Get/Verify bsd 100% |**************************| 9918 KB 00:24 Get/Verify bsd.rd 100% |**************************| 7494 KB 00:16 Get/Verify bsd.mp 100% |**************************| 9966 KB 00:24 Get/Verify base58.tgz 100% |**************************| 52949 KB 02:51 Get/Verify comp58.tgz 100% |**************************| 50445 KB 03:28 Get/Verify man58.tgz 100% |**************************| 8781 KB 00:44 Get/Verify game58.tgz 100% |**************************| 2722 KB 00:16 Get/Verify xbase58.tgz 100% |**************************| 22666 KB 01:35 Get/Verify xshare58.tgz 100% |**************************| 4401 KB 00:19 Get/Verify xfont58.tgz 100% |**************************| 39070 KB 02:36 Get/Verify xserv58.tgz 100% |**************************| 20330 KB 01:22 Installing bsd 100% |**************************| 9918 KB 00:00 Installing bsd.rd 100% |**************************| 7494 KB 00:00 Installing bsd.mp 100% |**************************| 9966 KB 00:00 Installing base58.tgz 100% |**************************| 52949 KB 00:02 Extracting etc.tgz 100% |**************************| 222 KB 00:00 Installing comp58.tgz 100% |**************************| 50445 KB 00:02 Installing man58.tgz 100% |**************************| 8781 KB 00:00 Installing game58.tgz 100% |**************************| 2722 KB 00:00 Installing xbase58.tgz 100% |**************************| 22666 KB 00:01 Extracting xetc.tgz 100% |**************************| 8974 00:00 Installing xshare58.tgz 100% |**************************| 4401 KB 00:00 Installing xfont58.tgz 100% |**************************| 39070 KB 00:01 Installing xserv58.tgz 100% |**************************| 20330 KB 00:00 Location of sets? (cd0 disk http or 'done') [done] done Time appears wrong. Set to 'Sat Nov 28 20:03:11 CET 2015'? [yes] yes Saving configuration files...done. Making all device nodes...done. installboot: No blocks to load Failed to install bootblocks. You will not be able to boot OpenBSD from sd0. ======================================================================= -- Laurent Salle