On Sat, Nov 28, 2015 at 09:24:23AM -0700, bluesun08 wrote: > ok, now i tested my adapter on > a) another machine > b) another usb port. > > Result: The adapter don't work on a) and don't work on b). > > Is there any other Wifi-USB-adapter which work reasonably reliable on > OpenBSD in HostAP mode?
I have what I believe is the exact same device you do (TP-Link TL-WN722N) and I just plugged it in to my MacBookAir7,2 where uhub0 is attached to usb0 which is attached to xhci0 and, after running fw_update to get the athn(4) firmware, was able to reattach and bring it up in hostap mode without any issues. athn0 at uhub0 port 1 configuration 1 interface 0 "ATHEROS USB2.0 WLAN" rev 2.00/1.08 addr 8 athn0: AR9271 rev 1 (1T1R), ROM rev 13, address f8:1a:67:1f:cc:89 athn0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 lladdr f8:1a:67:1f:cc:89 priority: 4 groups: wlan media: IEEE802.11 autoselect (autoselect hostap) status: active ieee80211: nwid "hostap test" chan 1 bssid f8:1a:67:1f:cc:89 I think stsp@ is correct that something else is going on with xhci(4) on your machine since this USB device works pretty well. I also tested an older rum(4) device I have as well and that also works. Bryan